• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.858-861
• /
• 2014

This paper presents a simplified finite element tire model for vehicle dynamics analysis. The classical finite element tire model was too big to simulate dynamic properties of the tire. In the simplified model, number of nodes of the tire model was dramatically reduced, and thus its simulation time was several times less than the classical model. Bead, carcass, belt which have an important role to the dynamic characteristics of tire were replaced by simple axis symmetric membrane elements. Also the rebar element was deleted. The tire model has been verified by comparing vertical stiffness data of the simulation model to the test data.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.769-770
• /
• 2006

This paper proposes the design method of a magnetic suspension that can control external vibration caused by low frequencies on the external vibrations by low frequencies. The magnetic suspension with individual controls is able to compensate the vibrations unlike a mechanical suspension. In the magnetic suspension, two characteristics are required. Firstly, magnetic motive force(MMF) by armature winding must be increased linearly. Secondly, identical magnitude of output force should be produced as direction of MMF. In this paper, axis-symmetric finite element analysis is used for magnetic field analysis. In order to optimize magnetic suspension, response surface methodology combined with experimental design is applied to investigate the characteristics and optimize the magnetic suspension for vibration -free table.

• Journal of Welding and Joining
• /
• v.12 no.2
• /
• pp.76-86
• /
• 1994

Spot welding behavior of galvanized steel has been studied using both numerical and experimental techniques. The model that used to calculate temperature distribution within weldment is two-dimensional axis-symmetric finite difference method, and nugget sizes of specimen welded in condition of welding current and time has been estimated by experiment Results have shown that nugget sizes are increased in proportion to welding current and time, but the growth rate of nugget is decreased. Shear-tensile strength tests have shown interface fracture when welding current is 7, 9KA, welding time is 8-14cycle and 11KA, 8-10cycle respectively, but above 7, 9KA fracture shows button type. In button fracture, shear-tensile strengths have been proportional to nugget sizes.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.109.1-109.1
• /
• 2010

파랑의 거동을 해석하기 위해 몇 십 년 동안 많은 연구들이 진행되었다. 그 중에서 해석적인 방법으로 축대칭 지형과 같은 간단한 지형을 지나는 파랑의 변형을 예측하는 것은 실험에 의한 방법에 비해 시간적, 비용적인 측면에서 유리하다. 또한 수치기법에 의한 오차를 발생하지 않기 때문에 보다 정확한 해를 구할 수 있다는 장점이 있다. 그러나 단일주기, 단일방향에 대한 가정을 거치기 때문에 실제 해역에서의 복잡한 파랑 변형을 예측하는데 한계가 있다. 고유함수전개법을 축 대칭 지형에 적용시키는 연구는 Bender and Dean(2005)에 의해 제시되었으며, 본 연구에서는 이것을 발전시켜 다방향 불규칙파에 대한 파랑 변형을 모의하였다. 그리고 결과를 단일주기에 의한 규칙파와 비교하여 그 특성을 알아보았다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.7-14
• /
• 2001

구조물 하중에 의한 점성토 지반의 침하량을 보다 정확하게 평가하기 위해서는 지반 내의 흙요소가 경험하는 실제적인 응력경로와 이에 따른 변형양상이 적절하게 고려되어야만 한다. 따라서 본 연구에서는 축대칭 조건의 다양한 응력경로를 따라 발생하는 정규압밀 점성토의 변형 거동을 고찰한 기존의 실험적 연구결과를 바탕으로 응력경로법에 근거한 보다 간편하고 합리적인 침하량 평가기법을 제시하였다. 또한 본 연구에서는 제시된 평가기법을 기존의 1차원적인 침하량 평가기법들과 함께 실제와 유사한 조건을 가지는 가상지반의 침하량 산정에 적용해 보았으며, 동일한 조건에 대해 소성모델(MCC 모델)과 혼합압밀이론에 바탕을 둔 유한요소해석을 실시하였다. 그리고 이를 통해 얻어진 결과들을 비교.분석함으로써 기존 평가기법들의 문제점과 한계를 명확히 제시하였으며, 응력증분 평가방법이 침하량 평가에 미치는 영향을 분석하였다.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.274-279
• /
• 1997

A magnetic spectrometer was designed for out-of-plane coincidence (e, e' P) measurements in electron scattering. The spectrometer consists of four magnetic spectrometers with different polar angles about the symmetric axis in the scattering plane. The performance of the machine was optimized for the precision measurements of nucleons and few-body nuclei. This paper presents the ion-optical design and measured performance of one spectrometer which was constructed as a prototype.

• Journal of the Korean Magnetic Resonance Society
• /
• v.17 no.2
• /
• pp.92-97
• /
• 2013

We study the electron spin resonance line-width (ESRLW) of $Fe^{3+}$ in crystalline $LiNbO_3$ ; the ESRLW is obtained using the projection operator method (POM) developed by Argyres and Sigel. The ESRLW is calculated to be axially symmetric about the c-axis and is analyzed by the spin Hamiltonian with an isotopic g factor at a frequency of 9.5 GHz. The ESRLW increases exponentially as the temperature increases, and the ESRLW is almost constant in the high-temperature region (T>8000 K). This kind of temperature dependence of the ESRLW indicates a motional narrowing of the spectrum when $Fe^{3+}$ ions substitute the $Nb^{5+}$ ions in an off-center position. It is clear from this feature that there are two different regions in the graph of the temperature dependence of the ESRLW.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.4
• /
• pp.7-13
• /
• 2002

In this study, the mathematical model on the various complicated levels of the viscous liquid flows in the symmetric channel with the complicated shape was introduced and the assumptions applied to the simplified model was proposed. To analyse the steady cavitation flow, axis transform of physical region to non-dimensional region was performed, and multigrid were generated. Using this model, the steady cavitation flow was calculated, and good coincidence between experiment and calculation was achieved.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.72-76
• /
• 2021

The polarized micro-photoluminescence spectrum was analyzed to investigate the anisotropic localized states in a single GaAs quantum ring. An energy difference of ~0.1 meV was observed from the perpendicularly polarized spectrum measured by a pair of linear analyzers. Spectral dependence of the polarized emission was also characterized in terms of rotation and ellipticity angles using four Stokes parameters. While the rotation angle indicates the symmetric axis of an anisotropic quantum ring with a small variation (± 2°), the ellipticity angle varies from 7.4° down to -2.5°. We conclude that optical anisotropy and birefringence are induced by the crescent-like lateral shape of localized states.

• Journal of The Korean Astronomical Society
• /
• v.56 no.2
• /
• pp.187-194
• /
• 2023

The remote sensing technique of measuring the magnetic field was applied first to sunspots by Hale (1908). Later Babcock (1961) showed that the solar surface magnetic field on a global scale is a dipole in first-order approximation and that this dipole field reverses once every solar cycle. The Wilcox Solar Observatory (WSO) supplies the spherical harmonics coefficients of the solar corona magnetic field of each Carrington Rotation, calculated based on the remotely-sensed photospheric magnetic field of the solar surface. To infer the internal current system producing the global solar coronal magnetic field structure and evolution of the Sun, we calculate the multipole components of the solar magnetic field using the WSO data from 1976 to 2019. The prominent cycle components over the last 4 solar activity cycles are axis-symmetric fields of the dipole and octupole. This implies that the current inversion driving the solar magnetic field reversal originates from the equatorial region and spreads to the whole globe. Thus, a more accurate solar dynamo model must include an explanation of the origin and evolution of such solar internal current dynamics.