• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.374-387
• /
• 2016

This paper derives an improved analytical model to estimate switching loss and analyze the effects of parasitic elements on the switching performance of SiC MOSFETs. The proposed analytical model considers the parasitic inductances, the nonlinearity of the junction capacitances and the nonlinearity of the trans-conductance. The turn-on process and the turn-off process are illustrated in detail, and equivalent circuits are derived and solved for each switching transition. The proposed analytical model is more accurate and matches better with experimental results than other analytical models. Note that switching losses calculated based on experiments are imprecise, because the energy of the junction capacitances is not properly disposed. Finally, the proposed analytical model is utilized to account for the effects of parasitic elements on the switching performance of a SiC MOSFET, and the circuit design rules for high frequency circuits are given.

• ETRI Journal
• /
• 제17권1호
• /
• pp.23-36
• /
• 1995

We present a performance evaluation model of cell reassembly mechanism in an ATM switching system. An ATM switching system may be designed so that communications between processors of its control part can be performed via its switching network rather than a separate inter-processor communications network. In such a system, there should be interface to convert inter-processor communication traffic from message format to cell format and vice versa, that is, mechanisms to perform the segmentation and reassembly sublayer. In this paper, we employ a continuous-time Markov chain for the performance evaluation model of cell reassembly mechanism with individual buffering, judicially defining the states of the mechanism. Performance measures such as message loss probability and average reassembly delay are obtained in closed forms. Some numerical illustrations are given for the performance analysis and dimensioning of the cell reassembly mechanism.

• 소음진동
• /
• 제8권3호
• /
• pp.457-466
• /
• 1998

This paper evaluates the performance of a Magneto-Rheological (MR) fluid mount. The mount incorporates MR fluid in a conventional fluid mount to open and closed the inertia track between the fluid chambers of the mount. It is shown that such switching of the inertia track improves the mount's isolation effect, by eliminating the large transmissibility peak that commonly exists at frequencies higher than the notch frequency for conventional fluid mounts. The switching frequencies of the MR mount is evaluated, based on the parameters of the mount. A simple control scheme for switching the mount between the open and closed states is proposed, and the performance of the controlled mount is compared with conventional mounts. A sensitivity analysis is conducted to evaluate the effect of parameter errors in estimating the switching frequencies and mount performance. The results show that the switching frequencies can be accurately determined from mount parameters that are easily measured or estimated.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1053-1060
• /
• 2000

In this paper, a discrete-time variable structure control method using recursively defined switching function and a decoupled variable structure disturbance compensator is used to achieve high performance circular motion control of a CNC machining center. The discrete-time variable structure control with the decoupled disturbance compensator method developed in this paper uses a recursive switching function defined as the sum of the current tracking error vector and the previous value of the switching function multiplied by a positive constant less than one. This recursive switching function provides much improved performance compared to the method that uses a switching function defined only as a linear combination of the current tracking error. Enhancements in tracking performance are demonstrated in the circular motion control using a CNC milling machine.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 강연회 및 연구개발 발표회 논문집
• /
• pp.220-227
• /
• 1998

This paper evaluate the performance of a Magneto-Rheological (MR) fluid mount. The mount incorporates MR fluid in a conventional fluid mount to open and closed the inertia track between the fluid chambers of the mount. It is shown that such switching of the inertia track improves the mount's isolation effect, by eliminating the large transmissibility peak that commonly exists at frequencies higher than the notch frequency for conventional fluid mounts. The switching frequencies of the MR mount is evaluated, based on the parameters of the mount. A simple control scheme for switching the mount between the open and closed states is proposed, and the performance of the controlled mount is compared with conventional mounts. A sensitivity analysis is conducted to evaluate the effect of parameter errors in estimating the switching frequencies and mount performance. The results show that the switching frequencies can be accurately determined from mount parameters that are easily measured or estimated.

• 한국조리학회지
• /
• 제17권5호
• /
• pp.139-153
• /
• 2011

본 연구는 호텔기업의 브랜드 증거가 전환과 관계성과에 대한 인과관계를 파악하여 차별화되고 경쟁력 있는 유용한 정보를 제공하고자 하였다. 표본의 단위는 서울지역의 브랜드 증거를 전환한 호텔고객들이 조사에 참여하였으며, 2011년 6월 10일부터 2011년 7월 20일까지 총 500부를 배포하고 이중 408부에 대하여 SPSS 18.0과 AMOS 18.0을 이용하여 요인분석과 신뢰성 검증을 실시하고, 제시된 연구가설을 검증하기 위해서 공분산구조분석을 실시하였다. 분석결과 종사자서비스는 전환장벽과 전환비용에 유의한 영향을 미치는 것으로 나타났으며, 브랜드 네임은 전환장벽과 전환비용에, 이미지 일치성은 전환장벽과 전환비용, 대안매력에 유의한 결과를 보이는 것으로 나타났다. 그리고 지각된 가격은 전환장벽에 유의한 영향을 미치는 것으로 나타났다. 둘째, 전환장벽, 전환비용, 대안매력은 관계성과 즉, 전환의도와 비재무적성과에 유의한 영향을 미치는 것으로 나타났다. 셋째, 종사자서비스, 브랜드 네임, 이미지일치성은 전환의도 및 비재무적성과에 유의한 결과를 보이고 있는 것으로 밝혀졌다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.85-89
• /
• 1998

A switching power stage is a very nonlinear system because it has two or more operation modes in one switching cycle. To model a switching power stage, the state space averaging method has been developed. Though it allows a unified treatment of a large variety of switching power stages, the model it yields is always very nonlinear. So, it is required to linearize the averaged model. But it is well known that a controller for a nonlinear plant designed by the linearization frequently fails in showing satisfactory control performance. Hence it is very natural to try to design a nonlinear controller for a switching power stage. In design of a switching power system, nonlinear control approaches such as adaptive control and fuzzy control have been widely studied so far. In this research, a recently developed control method, time delay control is briefly studied and a design example for a ZVS PWM half bridge converter is given. The performance of the time delay controller is compared to its conventional counterpart, PI controller by computer simulations.

• 전자공학회논문지S
• /
• 제34S권3호
• /
• pp.12-23
• /
• 1997

In this paper, we propose a new cell switch fabric for increasing the performance of ATM switching systems. Proposed switching network consists of a sorting network and a routing network. Both of these are multistage networks where each stage performs a fixed permutation on the incoming lines, and then routes them through a clumn of 2x2 switching elements. It is designed for distributing inputs and parallel processing to reduce the hardware complexity and obtain high performance of switching network. The structure and the operation of th eswitching network aredescribed and the performanceof the switching network is anlyzed under uniform traffic models. In this result, though the size of proposed network is increased the large scale, it has always the same throughput as the that of genral output queueing system with N=2. So, it is found that our proposed network is appropriate for the high apeed and lrger size of ATM switching systems.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.265-268
• /
• 1998

This paper presents a soft-switching average current control PWM high power factor boost converter. Conventional boost ZVT-PWM converter has a disadvantage of hard-switching for auxiliary switch at turn-off. A soft switched auxiliary switch is proposed to achieve a high performance ZVT-PWM boost rectifier. The simulation and experimental results show that soft switching operation can be maintained for wide line and load range, which in turn improves the converter performance in terms of efficiency, switching noise and circuit reliability.

• Journal of Power Electronics
• /
• 제3권1호
• /
• pp.1-9
• /
• 2003

This paper presents a performance analysis of typical Auxiliary Resonant Commutation Snubber-assisted three phase voltage source soft switching inverter which can operate under a condition of Zero Voltage Switching (ZVS) using a digital control scheme which is suitable for high power applications compared with resonant DC link snubber assisted soft switching inverter. The system performances of this inverter are illustrated and evaluated on the basis of experimental results.