• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.193-194
• /
• 2014

This paper compares physical characteristic of MOSFET based on Si and SiC to achieve high efficiency in converters using MOSFETs which are typical switching elements. Also, it compares a result to compare operating efficiency when DC/DC converter is switching with each element.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.145-148
• /
• 1999

The ability to rapidly create and deploy new and novel services in response to market demands will be the key factor in determining the success of the future service provider. This goal may be approached from different directions. One of them is an open interface making the functionalities of a network element programmable and usable by outside entities. In this paper, we describe several aspects of this new, hot technical area and introduce related standard activities. In addition, we present a new switching system called MSMP (Multi-Service Multi-Plug-In), which is based on the open programmable interface concept, and describe its architecture and main functionalities of its components.

• Structural Engineering and Mechanics
• /
• 제67권6호
• /
• pp.629-641
• /
• 2018

The paper describes the development of a two-dimensional (2D) co-rotational nonlinear beam finite element that includes advanced path-following capabilities for detecting bifurcation instability in elasto-plasticity of steel elements subjected to fire without introducing imperfections. The advantage is twofold: i) no need to assume the magnitude of the imperfections and consequent reduction of the model complexity; ii) the presence of possible critical points is checked at each converged time step based on the actual load and stiffness distribution in the structure that is affected by the temperature field in the elements. In this way, the buckling modes at elevated temperature, that may be different from the ones at ambient temperature, can be properly taken into account. Moreover, an improved displacement predictor for estimating the displacement field allowed significant reduction of the computational cost. A co-rotational framework was exploited for describing the beam kinematic. In order to highlight the potential practical implications of the developed finite element, a parametric analysis was performed to investigate how the beam element compares both with the EN1993-1-2 buckling curve and with experimental tests on axially compressed steel members. Validation against experimental data and numerical outcomes obtained with commercial software is thoroughly described.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.332-342
• /
• 2018

This paper proposes a parameter design method for multi-element resonant converters (MERCs) with a unique resonant zero point (RZP). This method is mainly composed of four steps. These steps include program filtration, loss comparison, 3D figure fine-tuning and priority compromise. It features easy implementation, effectiveness and universal applicability for almost all of the existing RZP-MERCs. Meanwhile, other design methods are always exclusive for a specific topology. In addition, a novel dual-CTL converter is also proposed here. It belongs to the RZP-MERC family and is designed in detail to explain the process of parameter selection. The performance of the proposed method is verified experimentally on a 500W prototype. The obtained results indicate that with the selected parameters, an extensive dc voltage gain is obtained. It also possesses over-current protection and minimal switching loss. The designed converter achieves high efficiencies among wide load ranges, and the peak efficiency reaches 96.9%.

• 한국통신학회논문지
• /
• 제8권1호
• /
• pp.12-16
• /
• 1983

本論文은 $V_3O_5-P_2O_5$系 유리 半導 를 硏究對象으로 하였다. 이것은 비교적 낮은 溫度에서 만들 수 있고 空氣中에서 취급할 수 있기 때문에 利點이 많다. 素子는 $V_3O_5,\;P_2O_5$粉末을 70:30mol%造成比로서 混合하여 電氣爐속에서 $800[^\circ{C]-1000[}^\circ{C]}$로 30分~3時間 加熱하여 만들었다. 이와 같이 많든 素子는 ~$10^5\;\Omega$ 정도의 抵抗값을 가졌으며 溫度에 다라 負特性, 스위칭(switching)特性을 갖는 것을 確認하였고 傳奇的特性을 調査하여 等價回路를 提示하였다.

• 한국정보과학회논문지:정보통신
• /
• 제28권3호
• /
• pp.447-453
• /
• 2001

본 논문에서는 방향성 커플러를 이용하여 구성한 광 베니언-형 교환 망에 있어 교환소자를 달리하는 멀티캐스팅의 스케줄링을 고려한다. 임의의 주어진 시각에 최대한 하나의 접속만이 각각의 교환소자를 점유하기 때문에 블록킹은 물론 누화가 발생하지 않도록 보장된다. 이러한 멀티캐스팅에서는 대개 수차례 걸친 라우팅이 수반되므로 라우팅 횟수를 최소한으로 하는 것이 바람직하다. 먼저 일-대-다 접속 능력을 제공하는 광 베니언-형 망에서 접속들이 동일한 교환소자를 경유하기 위한 필요충분 조건을 제시한다. 멀티캐스트 접속을 일정한 부분접속들로 분할 하는 규칙을 정의하고 부분접속들간의 누화 관계를 그래프로 표현한다. 최악의 경우의 누화를 분석하기 위해 그래프차수의 상한을 제시한다. 후속 논문(제2부)[14]에서는 스케줄링 알고리즘과 스케줄링 길이의 상한을 고찰하고 관련 연구결과와의 상세한 비교를 다룬다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.5860-5876
• /
• 2018

A single snapshot data can only provide limited amount of information so that the rank of covariance matrix is not full, which is not adopted to complete the parameter estimation directly using the traditional super-resolution method. Aiming at solving the problem, a joint time delay and angle estimation using matrix pencil method based on information reconstruction vector for orthogonal frequency division multiplexing (OFDM) signal is proposed. Firstly, according to the channel frequency response vector of each array element, the algorithm reconstructs the vector data with delay and angle parameter information from both frequency and space dimensions. Then the enhanced data matrix for the extended array element is constructed, and the parameter vector of time delay and angle is estimated by the two-dimensional matrix pencil (2D MP) algorithm. Finally, the joint estimation of two-dimensional parameters is accomplished by the parameter pairing. The algorithm does not need a pseudo-spectral peak search, and the location of the target can be determined only by a single receiver, which can reduce the overhead of the positioning system. The theoretical analysis and simulation results show that the estimation accuracy of the proposed method in a single snapshot and low signal-to-noise ratio environment is much higher than that of Root Multiple Signal Classification algorithm (Root-MUSIC), and this method also achieves the higher estimation performance and efficiency with lower complexity cost compared to the one-dimensional matrix pencil algorithm.

• Journal of Magnetics
• /
• 제11권2호
• /
• pp.61-65
• /
• 2006

The physical origin of complex dynamic domain configuration in nonequilibrium magnetic systems with mesoscopic length scales has been studied. An increasing complexity in the spatial feature of the evolution is found to accompany the increasing reversal speed, when a ferromagnetic element is driven by progressively faster switching fields applied antiparallel to the initial magnetization direction. As reversal rates approach the characteristic precession frequencies of spin fluctuations, the thermal energy can boost the magnetization into local configurations which are completely different from those experienced during quasistatic reversal. The sensitive dependence of the spatial pattern on switching speed can be understood in terms of a dynamic exchange interaction of thermally excited spins; the coherent modulation of the spins is strongly dependent on the rise time of switching pulses.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1891-1895
• /
• 2003

Switch-mode power supplies (SMPS) have become a major source of conducted electromagnetic interference (EMI) which is the combination between differential mode (DM) noise and common mode (CM) noise. This paper presents the conducted EMI reduction approach in flyback switched mode power supply by rerouting for circuit balance to reduce common mode noise. And differential mode noise can be reduce by adding $c_x$ capacitor across the input power line, and passive element to the gate drive of switching device MOSFET to slow down the switching times. This combination of our approach is the effective way to reduce the conducted EMI and it is also a cost effective for product design

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.505-508
• /
• 2012

A permanent magnet flux switching (PMFS) machine has a simple rotor, whilst both magnets and coils are set in the stator, resulting in easy removal of heat due to both copper loss and eddy current loss in magnets. However, the volume of magnets used in PMFS machines is usually larger than in conventional PM machines, and leakage flux does exist at the non-airgap side. To make full use of the magnets and gain higher power density, a novel 3-dimensional (3D) field PMFS machine is developed. It combines merits of the tubular linear machine, external-rotor rotary machine and axial-flux rotary machine, hence, offers high power density and peak torque capability, as well as efficient utility of magnets owing to the unique configuration of triple airgap fields.