• Journal of the Korean Society of Costume
• /
• v.50 no.2
• /
• pp.111-123
• /
• 2000

This study compares architecture with dress, investigates the image of transparency expressed in modern dress, and reveals its modern meaning. That is the purpose for this study. The study results are as follows. First, purity was expressed with simple, white color which has not any exaggeration or decoration, and transparent veils of wedding dress express clean and pure image which represents the original meaning of wedding dress. Second, eroticism conveys being erotic by exposing human body through transmission of light over transparent materials. Eroticism expressed by wearing thin and transparent dress with body-conscious line almost like being nude or emphasizing the sexually curious area in human body. The biggest difference in this study is that eroticism is delivered in dress, but not in architecture. Third, playfulness shows synchronism which recognizes human body with transmission of light over ,linear, transparent materials or recognizes inside dress. Playfulness expressed with location switch between inside and outside, exaggeration, distortion , and emphasis. Forth , openness makes dress atmosphere soft by putting transparent materials over opaque materials, expressed separation from restriction by wearing transparent dress over a naked human body, and expressed open ad free image by expressing human emancipation and freedom. Transparent dress expressed modern human being's sensitivity desire for living with light and joyful mood departing from heavy through, and also open and free image which pursues for freedom of human boedy departing from the restriction of human body.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1285-1294
• /
• 1999

In this paper we consider the performance of TCP video traffic over ABR with Long-Range Dependent VBR traffic. As compressed coded video traffics are increasing rapidly over Internet, lots of studies are being done for transmitting those traffics efficiently using limited network resources. We consider here the transmitting video service over ABR service in ATM networks, especially satellite networks. CBR or VBR services are suggested in transmitting the video traffic in ATM Forum TM 4.0. But ABR service connection, which is considered as appropriate service for data traffic, can be established with a small amount of bandwidth, MCR (Minimum cell rate). Furthermore ABR service can control the source's transmitting rate using feedback mechanism. Using this feature ABR service can be used in some applications which can control their quality of services corresponding to network loads. Compressed video sources with MPEG-2 are used for Long-Range Dependent VBR traffic here. We model the compressed video source to resemble the MPEG-2 transport streams. These compressed video traffic streams are consisted of three different frames, I-frame, P-frame, and B-frame. So when a network are overloaded, we can control the quality of service using this traffic features. TCP Traffics over ABR need large buffers in ATM switch to satisfy their QoS with background VBR traffics, which have high deviations in bandwidth. Furthermore satellite ATM networks with large feedback delay need large buffers corresponding RTT delay. The performance comparisons among EFCI and ER switch (ERICA+) switches in the network circumstances described above were shown in this paper. We also considered the case with ON-OFF VBR traffics.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.86-94
• /
• 2017

In this study, we will describe a new design of carbon nanotubes tip. Single-walled carbon nanotubes produced using high-pressure CO over Fe particles (HiPCO) at CNI, Houston, TX used in this study. These tips were manufactured by employing a drawing technique using glass puller. Field electron microscopies with tips (cathode) to screen (Anode) separation of ~10 mm was used to characterize the electron emitters. The system was evacuated down to base pressure of (${\sim}10^{-8}$ mbar) when baked at up to (${\sim}200^{\circ}C$) over night. An electron field emission patterns, as well as current versus voltage characteristics and Fowler-Nordheim plots, are discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1415-1418
• /
• 2007

When a high voltage COS fuse becomes a short circuit by the over current, the impulse noise over 150 dB(A) with the strong pulse jet is radiated from the COS fuse of an electric transformer. For the purpose of the impulse noise reduction, in this study, a reactive type silencer with perforated panels are considered. The transmission loss of the silencer are calculated by transfer matrix method. The effect of the porosity, the distance between panels, and the number of perforated panel on the sound transmission loss is investigated and discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.5
• /
• pp.340-344
• /
• 2012

Protected Circuit Module protects battery from over-charge and over-discharge, also prevents accidental explosion. Therefore, power MOSFET is essential to operate as a switch within the module. To reduce power loss of MOSFET, the on state voltage drop should be lowered and the switching time should be shorted. However there is trade-off between the breakdown voltage and the on state voltage drop. The TDMOS can reduce the on state voltage drop. In this paper, effect of design parameter variation on electrical properties of TDMOS, were analyzed by computer simulation. According to the analyzed results, the optimization was performed to get 65% higher breakdown voltage and 17.4% on resistance enhancement.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.4
• /
• pp.195-200
• /
• 2009

In this paper, we propose a new priority Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose a Just Enough Time (JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. The simulation results shows that the proposed scheme has more advantages over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.525-528
• /
• 2000

According to the development of B-ISDN on ATM network, the uses of Multimedia service is growing. Although ABR service uses the network resource most effectively because it is able to change the transfer rate, it is not used for multimedia service until recently. In this paper, we set priority queue and non-priority queue in the ATM switch and each queue has threshold so is can be adopted in different transfer rate method. We propose the real-time traffic transfer method over ABR service based on an effective traffic control method.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.1
• /
• pp.7-12
• /
• 2010

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical Wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop counts. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose the Just Enough Time (JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.498-500
• /
• 1993

This paper presents handover algorithm method using fuzzy rules and neura1 network. In future mobile communication systems, the amount of call requests over a region will increase dramatically. This problem has to be solved by decreasing the cell size. But, this method lets a mobile station switch the a base station at a higher rate. In order to maintain better mobile communication system in a micro or pico cellular system, better handover algorithm must be devoloped. In this paper, we propose a handover algorithm which is based on the fuzzy teory that is applied to make rules with the parameters and neural network that is to learn rules. This new handover algorithm is tested by computer simulation and compared with the conventional algorithms.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.368-371
• /
• 2000

Two-stage power factor correction (PFC) converter with a single PWM controller is proposed. It consists of a power factor pre-regulator cascaded by an isolated DC/DC converter as in a conventional two-stage approach. However, a single PWM controller is used as in a single-stage, single-switch PFC approach. This converter gives the goof power factor correction, low line current harmonic distortions, and tight output voltage regulations. This converter also has a high efficiency by employing an soft switching method. The proposed approach has advantages such as high performance over the single-stage approach and low cost over two-stage approach. The experimental results obtained on a 300W (30V/10A) prototype PFC converter are given to verify the effectiveness of the proposed control method.