• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.925-946
• /
• 2015

This paper presents a new cost-effective hybrid GFRP-Concrete deck system that the GFRP panel serves as both tensile reinforcement and stay-in-place form. In order to understand the fatigue behavior of such hybrid deck, fatigue test on a full-scale specimen under sagging moment was conducted, and a series of static tests were also carried out after certain repeated loading cycles. The fatigue test results indicated that such hybrid deck has a good fatigue performance even after 3.1 million repeated loading cycles. A three-dimensional finite element model of the hybrid deck was established based on experimental work. The results from finite element analyses are in good agreement with those from the tests. In addition, flexural fatigue analysis considering the reduction in flexural stiffness and modulus under cyclic loading was carried out. The predicted flexural strength agreed well with the analytical strength from finite element simulation, and the calculated fatigue failure cycle was consistent with the result based on related S-N curve and finite element analyses. However, the flexural fatigue analytical results tended to be conservative compared to the tested results in safety side. The presented overall investigation may provide reference for the design and construction of such hybrid deck system.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제26권2호
• /
• pp.31-38
• /
• 2020

Purpose: The ramp is an important facility for the barrier free access and vertical circulation of users of various buildings, including users of walker, wheelchair users, stroller users, and baggage carriers. The installation standards for ramps in Korea have various problems during construction and BF certification. It is necessary to improve the criteria for ensuring practical mobility and safety. Method: Korean standard, International Standard(ISO 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(OENORM B 1600, 2017), Swiss Standard(Norm SIA 500, 2009), Canadian Standard(Building Standards Guide, 2017), American Standard(ADA Standards, 2010) were investigated and analyzed. A comprehensive improvement of the ramp installation standards is proposed. Results: The ramp is a necessary facility for the barrier free access and vertical circulation of the disabled. It shall be installed with comprehensive consideration of the appropriate slope of the ramp, the distance of the continuous slope, the handle and upstand for pedestrian safety. In order to improve convenience, setting the proper slope and limiting the length of the slope are very important, and improvements are required to the levels presented by international and foreign standards. The unclear standards of Korean law and BF certification standards should be clearly improved so as not to be misinterpreted in construction and Barrier Free Certification. Implication: International and foreign standards should be reviewed to ensure practical mobility and safety. And comprehensive improvement measures should be presented through continuous research.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권5호
• /
• pp.443-447
• /
• 1995

Fifteen Karan-Swiss male calves of 9-12 months of age were divided into three groups of five each in a randomised block design. Animals in group I were fed wheat straw ad lib. and concentrate mixture according to their requirements, while in group II and III the animals were fed with 1/3 of the required concentrate mixture replaced by UMM licks 'Ex' and 'F', respectively. The DMI (kg/day as well as per 100 kg b.wt.) were similar (p > 0.05) among different groups of animals, however, the digestibility of DM as well as OM enhanced from $52.85{\pm}1.48$ to $58.36{\pm}1.89$ and $55.33{\pm}1.48$ to $60.12{\pm}1.75$, respectively. Growth rates of the calves were $533.8{\pm}27.25$, $532.3{\pm}42.24$ and $538.4{\pm}18.68$ g/d in groups I, II and ill (p > 0.05), respectively. Body composition and N balances of the animals were not affected by supplementation of UMM licks, however, protein retention efficiency was higher in group III ($82.57{\pm}2.54$) though nonsignificant. Feed cost/day was reduced from Rs. 7.92 (group I) to Rs. 4.62 (group II) and Rs. 3.44 (group III). Hence, partial replacement of concentrates by UMM licks reduced the cost of feeding of growing calves by 41.7 to 56.6% without affecting the growth performance.

• Structural Engineering and Mechanics
• /
• 제46권5호
• /
• pp.673-693
• /
• 2013

This paper presents a systematic design and training procedure for the feed-forward back-propagation neural network (NN) modeling of both forward and inverse behavior of a rotary magnetorheological (MR) damper based on experimental data. For the forward damper model, with damper force as output, an optimization procedure demonstrates accurate training of the NN architecture with only current and velocity as input states. For the inverse damper model, with current as output, the absolute value of velocity and force are used as input states to avoid negative current spikes when tracking a desired damper force. The forward and inverse damper models are trained and validated experimentally, combining a limited number of harmonic displacement records, and constant and half-sinusoidal current records. In general the validation shows accurate results for both forward and inverse damper models, where the observed modeling errors for the inverse model can be related to knocking effects in the measured force due to the bearing plays between hydraulic piston and MR damper rod. Finally, the validated models are used to emulate pure viscous damping. Comparison of numerical and experimental results demonstrates good agreement in the post-yield region of the MR damper, while the main error of the inverse NN occurs in the pre-yield region where the inverse NN overestimates the current to track the desired viscous force.

• Safety and Health at Work
• /
• 제4권3호
• /
• pp.149-155
• /
• 2013

Background: Stochastic resonance whole-body vibration training (SR-WBV) was tested to reduce work-related musculoskeletal complaints. Methods: Participants were 54 white-collar employees of a Swiss organization. The controlled crossover design comprised two groups each given 4 weeks of exercise and no training during a second 4-week period. Outcome was daily musculoskeletal well-being, musculoskeletal pain, and surefootedness. In addition, participants performed a behavioral test on body balance prior to when SR-WBV started and after 4 weeks of SR-WBV. Results: Across the 4-week training period, musculoskeletal well-being and surefootedness were significantly increased (p < 0.05), whereas musculoskeletal pain was significantly reduced only in those who reported low back pain during the last 4 weeks prior to the study (p < 0.05). Body balance was significantly increased by SR-WBV (p < 0.05). Conclusion: SR-WBV seems to be an efficient option in primary prevention of musculoskeletal complaints and falls at work.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.141-147
• /
• 2005

Although the importance of good conservation of historic sites including ancient royal tombs is wet] aware, still not much attention has been paid for the facilities and systems to preserve those historic sites, which includes precious artifacts as wall paints and carved works, etc. Even the general understanding about the environment of the underground space of tombs is not satisfactory. In the present study, vibration levels due to the operation of an HVAC system to maintain the desired indoor temperature and humidity are investigated experimentally. According to the measured data, the level of vibration inside the present model tomb with the indoor unit inside, showed order of magnitude less values than the Swiss Standards, but still higher than the value suggested by German standards, which is, zero. For the vibration level depends not only on the system design, but also on the installation methods, further study will be pursued for cases including different ways of installation.

• Journal of Power Electronics
• /
• 제2권4호
• /
• pp.250-257
• /
• 2002

This paper introduces the Interactive Power Electronics Seminar - iPES - a new software package for teaching of fundamentals of power electronic circuits and systems. iPES is constituted by HTML text with Java applets for interactive animation, circuit design and simulation and visualization of electromagnetic fields and thermal issues in power electronics. It does comprise an easy-to-use self-explaining graphical user interface. The software does need just a standard web-browser, i.e. no installations are required. iPES can be accessed via the World Wide Web or from a CD-ROM in a stand-alone PC by students and professionals. Due to the underlying software technology iPES is very flexible and could be used for on-line learning and could easily be integrated into an e-learning platform. The aim of this paper Is to give an introduction to the iPES-project and to show the different areas covered. The e- learning software is available at no costs at $\underline{www.ipes.ethz.ch}$ in English, German, Japanese, Korean, Chinese and Spanish. The project is still under development and the web page is updated in about 4 weeks intervals.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권2호
• /
• pp.7-18
• /
• 2022

European efforts to design superconducting conductors for a future tokamak have involved Nb₃Sn cable-in-conduit conductor (CICC). Nb₃Sn coils which undergo heat treatment to activate the Nb₃Sn material are mostly produced through the wind-then-react route. However, some Nb₃Sn coils have been proposed with CICCs of the react-then-wind route. The latter CICCs are physically constrained due to handling limitations which if not adhered to will result in irrecoverable damage to the Nb₃Sn cable inside, nullifying any performance advantage. A group at the Swiss Plasma Center has proposed such CICC designs, constructing samples and testing them for performance. The characteristics and performance of these react & wind (R&W) CICCs are compared with the more common wind & react (W&R) CICCs, and it is found that the R&W designs show more extreme characteristics than typical W&R Nb₃Sn CICCs for some parameters that are known to influence CICC performance. Where the R&W CICCs extend the range of those parameters, they also continue trends formed by the W&R CICCs with the parameters. The main observation, however, is that although the current sharing temperature performances of the R&W samples are above the average of the W&R samples they were compared to, they are not the highest. A similar observation applies to a cost comparison of the superconducting material where the R&W CICCs are found to be relatively cheap but not the cheapest. Given these results, clear practical advantages to the R&W CICC design is not evident.

• Medical Lasers
• /
• 제9권1호
• /
• pp.51-57
• /
• 2020

Background and Objectives For experiments on simulated burn, the preparation of an animal model is a very important step. The purpose of the current experiment is to design a simple and controllable method for the preparation of third-degree scald in a mouse model using the boiling water method. Materials and Methods A total of 18 Swiss mice were used. After the anesthetization, the mice were scalded by boiling water (100℃) using a mold with a 1 cm² circle area on the dorsum at contact times of 3s, 5s, and 8s. After confirming that 8 seconds of scald can cause a third-degree scald, the skin samples were collected at day 2, 4, 6, 8, 10, and 12, and analyzed by histopathological examinations. The wound retraction index (WRI) was also measured. Results Third-degree scald involving full-thickness skin was observed in the 8-second scald group, while a 3-second scald caused a superficial second-degree scald and a 5-second scald caused a deep second-degree scald. After third-degree scald, the burn wound continued to contract until day 14. Conclusion The scalding model of mice can be successfully established by the boiling water method. This method is easy to operate, it has a low cost, and it can control the scald depth by controlling the scald time. This is adequate to study skin thermal injury in the future. The scald model established by this method can last for 14 days.

• The Journal of Advanced Prosthodontics
• /
• 제9권2호
• /
• pp.85-92
• /
• 2017

PURPOSE. The aim of this study was to evaluate the effect of tooth surface pre-treatment steps on shear bond strength, which is essential for understanding the adhesive cementation process. MATERIALS AND METHODS. Shear bond strengths of different cements with various tooth surface treatments (none, etching, priming, or etching and priming) on enamel and dentin of human teeth were measured using the Swiss shear test design. Three adhesives (Permaflo DC, Panavia F 2.0, and Panavia V5) and one self-adhesive cement (Panavia SA plus) were included in this study. The interface of the cement and the tooth surface with the different pre-treatments was analyzed using SEM. pH values of the cements and primers were measured. RESULTS. The highest bond strength values for all cements were achieved with etching and primer on enamel ($25.6{\pm}5.3-32.3{\pm}10.4MPa$). On dentin, etching and priming produced the highest bond strength values for all cements ($8.6{\pm}2.9-11.7{\pm}3.5MPa$) except for Panavia V5, which achieved significantly higher bond strengths when pre-treated with primer only ($15.3{\pm}4.1MPa$). Shear bond strength values were correlated with the micro-retentive surface topography of enamel and the tag length on dentin except for Panavia V5, which revealed the highest bond strength with primer application only without etching, resulting in short but sturdy tags. CONCLUSION. The highest bond strength can be achieved for Panavia F 2.0, Permaflo DC, and Panavia SA plus when the tooth substrate is previously etched and the respective primer is applied. The new cement Panavia V5 displayed low technique-sensitivity and attained significantly higher adhesion of all tested cements to dentin when only primer was applied.