• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.22-27
• /
• 1999

While the conventional end-to-end anastomotic technique is accepted as 'the golden standard' for microvascular anastomosis, it is time-consuming and tedious. In an effort to offer faster and safer ways of performing microvascular anastomoses, numerous anastomotic techniques have been proposed, but further refinements in microvascular techniques are still necessary. A 'continuous suture with interrupted knot' technique was devised for faster and safer anastomosis. It has been successfully used in microanastomoses of both artery and vein for free tissue transfer. It is a combination of the interrupted suturing technique and the continuous suturing technique. First, a continuous suture is made with the size of loop decreasing in order, and then the sutures are tied individually from the first loop to the last one as in the conventional interrupted suturing technique. It was applied clinically to fourteen patients over the past ten months and found to be a highly efficient technique that satisfied our needs. This 'continuous suture with interrupted knot' technique has several advantages over other techniques : The operative time is reduced comparing conventional interrupted suture technique. By delaying the tie and with the vessel walls kept separated, the risk of through-stitch can be reduced. Tying all the sutures at one time not only speed up the procedures, but also reduced the surgeon's fatigue. In addition, it has no problem of anastomotic stenosis which is a disadvantage of continuous suture technique. This technique proved to be faster and safer, and has patency equal to that of the conventional end-to-end anastomosis. It is of great help to the surgeon in reducing operative time, especially in clinical situations when many anastomoses are required, or lengthy grafting procedures are undertaken.

• The Journal of the Korean dental association
• /
• v.50 no.8
• /
• pp.474-481
• /
• 2012

The periodontal flap surgery is the most widely utilized surgical procedure to reduce the pocket depth and to access the subgingival root surfaces for scaling and root planing. The diagnosis of the periodontal lesion and the objective of the surgery will dictate the type of flap procedure which will be utilized to obtain the best result. The incisions, type of flap and the selection of suturing design must be planned and executed to fit the problem. Periodontal flaps are designed to preserve gingival integrity and to gain access to root surfaces for residual calculus removal and to thoroughly remove granulation tissue so bone defects can be visualized and treated. Gentle and efficient procedures result in optimum healing and minimal postoperative pain. When flaps need to be repositioned apically or less often, coronally, then the flaps must sit passively at the appropriate level before suturing. To ensure this, buccal and lingual flaps need to be elevated beyond the mucogingival junction so the elasticity of the mucosa allows for flap mobility. Sometimes it may be necessary to extend the flap elevation apically with a split incision approach to minimize the effect of the less elastic periosteum. Vertical incisions can aid in flap positioning by allow ing the clinician to suture the flap at a different level to the adjacent untreated gingiva. In osseous periodontal surgery, flaps are apically positioned to minimize postoperative pocket depth. In regenerative periodontal surgery including implant surgery, soft tissue cove rage of bony defects, graft materials, membranes, and bio logic agents is important so sulcular incisions and light suturing techniques are crucial.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.5
• /
• pp.2475-2478
• /
• 2016

Background: Laparoscopic partial nephrectomy is one of the major surgical techniques for small renal masses. However, it is difficult to manage cutting and suturing procedures within acceptable time periods. To overcome this difficulty, we applied a three-dimensional (3D) video system with laparoscopic partial nephrectomy, and evaluated its utility. Materials and Methods: We retrospectively enrolled 31 patients who underwent laparoscopic partial nephrectomy between November 2009 and June 2014. A conventional two-dimensional (2D) video system was used in 20 patients, and a 3D video system in 11. Patient characteristics and video system type (2D or 3D) were recorded, and correlations with perioperative outcomes were analyzed. Results: Mean age of the patients was $55.8{\pm}12.4$, mean body mass index was $25.7{\pm}3.9kg/m^2$, mean tumor size was $2.0{\pm}0.8cm$, mean R.E.N.A.L nephrometry score was $6.9{\pm}1.9$, and clinical stage was T1a in all patients. There were no significant differences in operative time (p=0.348), pneumoperitoneum time (p=0.322), cutting time (p=0.493), estimated blood loss (p=0.335), and Clavien grade of >II complication rate (p=0.719) between the two groups. However, warm ischemic time was significantly shorter in the 3D group than the 2D group (16.1 min vs. 21.2min, p=0.021), which resulted from short suturing time (9.1 min vs. 15.2 min, p=0.008). No open conversion occurred in either group. Conclusions: A 3D video system allows the shortening of warm ischemic time in laparoscopic partial nephrectomy and thus may be useful in improving the procedure.

• Archives of Plastic Surgery
• /
• v.45 no.5
• /
• pp.458-465
• /
• 2018

Background Volar plate avulsion fracture of the proximal interphalangeal (PIP) joint is one of the most common hand injuries. In this study, we divided patients into two groups: patients with pure volar plate avulsion fracture, and patients with volar plate avulsion fracture concomitant with collateral ligament rupture. The purpose of this study was to compare long-term surgical outcomes between the two groups. As a secondary measure, the Mitek bone anchoring and polydioxanone (PDS) bone suturing techniques were compared. Methods A single-institutional retrospective review of the surgical treatment of volar plate avulsion fracture was performed. The cases were divided into those with pure volar plate avulsion fracture (group A, n=15) and those with volar plate avulsion fracture concomitant with collateral ligament rupture (group B, n=15). Both groups underwent volar plate reattachment using Mitek bone anchoring or PDS bone suturing followed by 2 weeks of immobilization in a dorsal protective splint. Results The average range of motion of the PIP joint and extension lag were significantly more favorable in group A (P<0.05). Differences in age; follow-up period; flexion function; visual analog scale scores; disabilities of the arm, shoulder, and hand scores; and the grip strength ratio between the two groups were non-significant. No significant differences were found in the surgical outcomes of Mitek bone anchoring and PDS bone suturing in group A. Conclusions Overall, the surgical outcomes of volar plate reattachment were successful irrespective of whether the collateral ligaments were torn. However, greater extension lag was observed in cases of collateral ligament injury.

• Journal of Minimally Invasive Surgery
• /
• v.21 no.4
• /
• pp.177-179
• /
• 2018

A rectocele with a weakened rectovaginal septum can be repaired with various surgical techniques. We performed laparoscopic posterior vaginal wall repair and rectovaginal septal reinforcement without mesh using a modified transperineal approach. A 63-year-old woman with outlet dysfunction constipation complained of lower pelvic pressure and sense of heaviness for 30 years. Initial defecography showed an anterior rectocele with a 45-mm anterior bulge and perineal descent. Laparoscopic procedures included peritoneal and rectovaginal septal dissection directed toward the perineal body, rectovaginal septal suturing, and peritoneal closure. The patient started a soft diet the following day and was discharged on the 5th postoperative day without any complications. The patient had no dyschezia or dyspareunia, and no problem with bowel function; 3-month follow-up defecography showed a decrease in bulging to 18 mm. Laparoscopic posterior vaginal wall and rectovaginal septal repair is safe and feasible for treatment of a rectocele, and enables early recovery.

• Journal of Gastric Cancer
• /
• v.24 no.1
• /
• pp.122-134
• /
• 2024

Most gastric subepithelial tumors (SETs) are asymptomatic and are often incidentally discovered during endoscopic procedures conducted for unrelated reasons. Although surveillance is sufficient for the majority of gastric SETs, certain cases necessitate proactive management. Laparoscopic wedge resection, although a viable treatment option, has its limitations, particularly in cases where SETs (especially those with intraluminal growth) are not visualized on the peritoneal side. Recent advances in endoscopic instruments and technology have paved the way for the feasibility of endoscopic resection of SETs. Several promising endoscopic techniques have emerged for gastric SET resection, including submucosal tunneling endoscopic resection, endoscopic full-thickness resection (EFTR), laparoscopic and endoscopic cooperative surgery (LECS), and non-exposure EFTR (non-exposed endoscopic wall-inversion surgery and non-exposure simple suturing EFTR). This study aimed to discuss the indications, methods, and outcomes of endoscopic therapy for gastric SETs. In addition, a simplified diagram of the category of SETs according to the therapeutic indications and an algorithm for the endoscopic management of SET is suggested.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.4
• /
• pp.214-220
• /
• 2017

Maxillary sinus lift for dental implant installation is a well-known and versatile technique; new techniques are presented based on the physiology of intrasinus bone repair. The aim of this review was to determine the status of graftless maxillary sinus lift and analyze its foundations and results. A search was conducted of the literature between 1995 and 2015 in the Medline, ScienceDirect, and SciELO databases using the keywords "maxillary sinus lift," "blood clot," "graftless maxillary sinus augmentation," and "dental implant placement." Ten articles were selected for our analysis of this technique and its results. Despite the limited information, cases that were followed for at least six months and up to four years had a 90% success rate. Published techniques included a lateral window, elevation of the sinus membrane, drilling and dental implant installation, descent of the membrane with variations in the installation of the lateral wall access and suturing. The physiology behind this new bone formation response and the results of the present research were also discussed. We concluded that this is a promising and viable technique under certain inclusion criteria.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.834-840
• /
• 2020

Objective : Carotid endarterectomy (CEA) is an effective surgical procedure for treating symptomatic or asymptomatic patients with carotid stenosis. Many neurosurgeons use a shunt to reduce perioperative ischemic complications. However, the use of shunting is still controversial, and the shunt procedure can cause several complications. In our institution, we used two types of modified arteriotomy suture techniques instead of using a shunt. Methods : In technique 1, to prevent ischemic complications, we sutured a third of the arteriotomy site from both ends after removing the plaque. Afterward, the unsutured middle third was isolated from the arterial lumen by placing a curved Satinsky clamp. And then, we opened all the clamped carotid arteries before finishing the suture. In technique 2, we sutured the arteriotomy site at the common carotid artery (CCA). We then placed a curved Satinsky clamp crossing from the sutured site to the carotid bifurcation, isolating the unsutured site at the internal carotid artery (ICA). After placing the Satinsky clamp, the CCA and external carotid artery (ECA) were opened to allow blood flow from CCA to ECA. By opening the ECA, ECA collateral flow via ECA-ICA anastomoses could help to reduce cerebral ischemia. Results : The modified suture methods can reduce the cerebral ischemia directly (technique 1) or via using collaterals (technique 2). The modified arteriotomy suture techniques are simple, safe, and applicable to almost all cases of CEA. Conclusion : Two modified arteriotomy suture techniques could reduce perioperative ischemic complications by reducing the cerebral ischemic time.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.3
• /
• pp.281-285
• /
• 2011

Sinus floor elevation is a predictable and standard procedure for the treatment of the posterior maxilla before insertion of dental implants. Although overall complication rates are low, complications can occur including sinus membrane perforation, infection of sinus, swelling and hemorrhage. The most common complication is membrane perforation. Recently, various techniques and materials for repair of perforation to the sinus membrane have been proposed. The purpose of this article is to report on various techniques and materials that can be used for repair of perforations to the sinus membrane. The search protocol used was the following electronic database: Pubmed, with a time limit from 1998 to 2009. The key words such as 'sinus lift', 'sinus augmentation', 'sinus floor elevation', 'sinus graft', 'sinus perforation', 'repair of sinus perforation' and 'repair of sinus membrane' were used, alone and in combination, when searching the database. Various techniques have been proposed to manage of perforation of sinus membranes. These include that the use of collagen membranes, demineralized freeze-dried human lamellar bone sheets, processed human allografts, lamella bone, buccal fat pads and suturing. Implant success rate ranges from 69.9% to 98.9%.

• Clinics in Shoulder and Elbow
• /
• v.25 no.3
• /
• pp.224-229
• /
• 2022

Background: Most acromioclavicular joint (ACJ) injuries are caused by direct trauma to the shoulders, and various methods and techniques are used to treat them; however, none of the options can be considered the gold standard. This study examines the horizontal stability of the ACJ after a complete dislocation was repaired using one of two Ethibond suture techniques, the loop technique and the two holes in the clavicle technique. Methods: In this single-blind, randomized clinical trial, 104 patients diagnosed with complete ACJ dislocation type V were treated using Ethibond sutures with either the loop technique or the two holes in the clavicle technique. Horizontal changes in the ACJ were radiographically assessed in the lateral axial view, and shoulder function was evaluated by the Constant (CS) and Taft (TS) scores at intervals of 3, 6, and 12 months after surgery. Results: The horizontal stability of the ACJ was better with the two-hole technique than the loop technique at all measurement times. CS and TS changes showed a significant upward trend over time with both techniques. The mean CS and TS at the final visit were 95.2 and 11.6 with the loop technique and 94.0 and 11.9 with the two-hole technique, respectively. The incidence of superficial infections caused by the subcutaneous pins was the same in the two groups. Conclusions: Due to the improved ACJ stability with the two-hole technique, it appears to be a more suitable option than the loop technique for AC joint reduction.