• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.262-268
• /
• 2017

The energy consumption of buildings is approximately 20.5% of the total energy consumption, and the interest in energy efficiency and low consumption of the building is increasing. Several studies have performed energy analysis and evaluation. Energy analysis and evaluation are effective when applied in the initial design phase. In the initial design phase, however, the energy performance is evaluated using general level information, such as glazing area and surface area. Therefore, the evaluation results of the detailed design stage, which is based on the drawings, including detailed information of the materials and facilities, will be different. Thus far, most studies have reported the analysis and evaluation at the detailed design stage, where detailed information about the materials installed in the building becomes clear. Therefore, it is possible to improve the accuracy of the energy environment analysis if the energy environment information generated during the life cycle of the building can be established and accurate information can be provided in the analysis at the initial design stage using a probability / statistical method. On the other hand, historical data on energy use has not been established in Korea. Therefore, this study performed energy environment analysis to construct the energy environment historical data. As a result of the research, information classification system, information model, and service model for acquiring and providing energy environment information that can be used for building lifecycle information of buildings are presented and used as the basic data. The results can be utilized in the historical data management system so that the reliability of analysis can be improved by supplementing the input information at the initial design stage. If the historical data is stacked, it can be used as learning data in methods, such as probability / statistics or artificial intelligence for energy environment analysis in the initial design stage.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.269-276
• /
• 2004

The reclaimed land has peculiar characteristic of nature environment unlike midtown or inland and also, in comparison with inland, has bad weather condition, such as low temperature, strong wind, excessive sunshine, and moisture involved in a salt. Therefore the case of developing water front needs understanding characteristic of weather environment mused by reclamation in detail and proper development and organized maintenance. If development which doesn't investigate topographic and climate characteristic sufficiently is drove ahead, a rise of expense for energy and maintenance is going to be mused by deteriorating weather environmental, occurring a flaw of facility and calculating inaccurate capacity of facility. We looked into the weather state and drew up the standard weather data of the newport area in Busan which is reclaiming and developing now. In this research at the base qf the standard weather data, we calculate the dynamic peak loads for commerce, business and residence and then we utilize the results of the load calculation as basic information to determine facility capacity in the rear city of the newport area.

• Korea Science and Art Forum
• /
• v.37 no.3
• /
• pp.365-376
• /
• 2019

Now, our urban space is composed of all kinds of sculptures that lost its individual charm in trend flows and street furniture standardized by the integrated design of standardized franchises and similar architectures per each region and autonomous districts. This study was to introduce the concept called the 'community furniture' in the urban environment that there is no an identity of the regional culture and a sense of place because of the mostly similar street environment. The purpose of this study is to propose the concept called the 'community furniture' referred to as public facilities that imply specific identities of some regions that have became the community art expanded into necessary facilities of urban composition as bus shelter's universal convenience and functionality have been preferentially handled and its regional identities are reflected. For doing this, this study fulfilled application alternatives of community furniture design's basic principles after examining the storytelling process of local cultural heritages and analyzing domestic and foreign cases of bus shelters. Results of this study are as follows. First, convergent synergy effects in information and culture and art sectors could be expected as bus shelters visually deliver storytelling factors that imply locally related images. Second, space and place's characteristics and sustainable design concepts embody local characteristics. They can suggest directions for vitalizing urban environment designs by being in harmony with surrounding environments. Third, it is expected that realizing distinctive places is possible as bus shelters with local communities' aesthetic consciousness and regionality are composed of new street spaces.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.2
• /
• pp.39-49
• /
• 2021

This study was conducted to establish practical goals for the viewing environment and interpretation and delivery system of cultural heritage and to create an viewing environment according to the classification of cultural heritage types, and the conclusions reached are as follows. First, five goals were set based on the international basic principles of the cultural heritage viewing environment and interpretation and delivery system. Second, based on the set goals, cultural heritage was classified into the first type 'disappeared and hidden heritage', the second type 'stuffed memory heritage', and the third type 'living memory heritage'. Third, the directions for creating the viewing environment for each type of cultural heritage were suggested. The first type has to be able to properly convey cultural heritage to visitors through excavation and digital technology. The second type needs a plan to deliver tangible and intangible values by combining various digital technologies with actual cultural heritage. The third type should emphasize the role of local residents in effectively enjoying the tangible and intangible values ??that already exist. Fourth, it proposed comprehensive considerations in the establishment of the cultural heritage viewing environment and interpretation and delivery system. Based on dynamic and sustainable heritage management, cultural heritage viewing should be valuable, satisfying and enjoyable. In addition, local communities should be actively involved, and tourism and conservation activities should be able to benefit the community. Establishment of a viewing environment should protect and strengthen the authenticity of cultural heritage.

• Land and Housing Review
• /
• v.14 no.3
• /
• pp.93-106
• /
• 2023

This study attempted to simulate changes in the thermal environment according to the type of apartment complex in Korea using CFD techniques and evaluate the thermal environment by type of apartment. First, apartment complex types in the 2000s and 2010s were referred from previous studies and four types of apartment complex were extracted from. Second, the layout of the apartment complex and temperature changes were analyzed by the direction of wind inflow. Third, a standardized model was created from each type using tower type, plate type, and mixed driving. Last, CFD simulations were performed by setting up the inflow of wind from a total of eight directions. The temperature was relatively low in the type consisting of only the tower type and the type of placing the tower type in the center of the complex, regardless of the direction of the wind. It was due to the good inflow of wind from these types to the inside of the complex. It can be interpreted because wind flows easily into the complex in these types. The findings showed that wind flow and resulting temperature distribution patterns differed depending on the building type and complex layout type, confirming the need for careful consideration of the complex layout in the early design stage. The results are expected to be used as basic data for creating a sustainable residential environment in the early design stage of apartment complexes in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.100-115
• /
• 2020

The manufacturing-oriented mobility system is being reorganized around the future mobility system represented by electrification, sharing, and autonomy, driven by the social demand for sustainable development. Changes in future mobility systems are expected to accelerate thanks to advances in IT technology. To this end, this study conducted an expert survey (N=23) to predict the direction of changes in the future mobility system. Through the survey, 'mobility sharing' was selected as a key factor in the future mobility system among four future mobility. In addition, 'safety' was selected as the most important service factors in future mobility system among eight future mobility service factors. We hope that the results of this study will be used as basic information to design policies and service directions of preparation for the future mobility system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.4
• /
• pp.65-73
• /
• 2008

Due to the amendment of the Act for Urban Parks in 2005, local governments have to establish long-range plans for securing and managing urban parks and green areas. This study aims to propose a method of setting priorities for green areas of land to be preserved before the development stage through the introduction of the concept of Green Infrastructure Assessment, and provide basic data to establish the network of urban parks and green areas by applying the GIA method to the city of Daejeon. The concept of GIA and the process of analysis have been drawn as a result of literature research and case studies. The results of this study show that an introduction of the GIA concept to set park and open space planning promotes the connection of the city planning process as well as presents very a reasonable source to facilitate sustainable development. Also, other results present a priority ranking for protection of parks and green areas as well as a means to manage potential focus areas. This study, does have research limitations such as a limited study area, scale, and conflicts between domestic and foreign computing data. Further studies need to set the planning process and examine the index survey to apply this method to various situations and areas.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.1
• /
• pp.35-42
• /
• 2014

Due to the development of civilization, the humans is privileged the rich of technologies for housing thermal environment. But, this kind of technological development caused enough trouble of energy excessive consumption. For solve this problem, many researchers strive to exploit the low energy sustainable techniques. For such a reason, the eco-friendly techniques of vernacular house are resurfacing. These traditional techniques are applied to a development of eco-friendly modern housing. They are no longer recognized as outdated products. On this context, this study proposes an scientific analysis on the thermal environment characteristics of Neolithic thatched-roof dugout hut(Um house). So far the several studies have been carried out in viewpoint of the history and structural compositions of the Um house which has been used as the normal housing for about 1000 years in the Neolithic era, however the thermal characteristics analysis of the Um house has never been studied. Um house is not a housing which has been composed by the scientific analysis or architectural design technology, but evolved empirically over a long period. This study on the thermal environment characteristics of Um house would provide basic information for the development of korean eco-friendly rural housing by korean climate characteristics. In this study, the thermal environmental characteristics of the Um house in the Neolithic era was analysed experimentally. The results of this study could be summarized as follows: 1. When the solar insolation and the ambient temperature in the daytime were $420W/m^2$ and $17^{\circ}C$ respectively, the surface temperature of the Um house roof covered with the rice straw was $37^{\circ}C$ and that in the roof $32^{\circ}C$, and in the conditions above the air temperature in the room was $15^{\circ}C$. 2. When the ambient relative humidity was 40%, that in the room of the Um house 50%, and at the ambient relative humidity of 90~100%, that in the room was 60%. 3. Through the experimental analysis, it was verified that the enthalpy and relative humidity is in an inverse relationship. 4. In general the comfort degree in the living space is changed with the seasonal climate, also in this study, the comfort degree in the room of the Um house in October and November was higher than that in May and June.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.107-118
• /
• 2016

Purpose - Over 90% of Domestic logistics industry is small enterprise and they are experiencing growth stagnation due to price-based competition structure rather than constructing logistics service of high added value. In order to get over this situation and pursue the development of logistics industry, strengthening its competitiveness, through inter-enterprise cooperative network build-up, would be a key alternative. Therefore, in this study, an index for measuring inter-enterprise cooperation level of Joint logistics business will be developed as a typical collaborative business model in logistics industry. Moreover, a strengthening competitiveness method suggests a developmental step and a key management index to mature in logistics industry. Research Design, Data, Methodology - This study is an index development research for measuring inter-enterprise cooperation level of logistics industry. Such a level was measured by performing a survey by targeting enterprises that participated in Joint logistics business. The targeting enterprises are typical cooperative models in logistics industry. Measurement items were developed which were based on the presented items in existing research. Question items were composed of selection type questions as answering Yes/No. They measures implementation status of corporate activity and detailed activity items measuring qualitative level. Total samples were based on 116 enterprise samples including 90 logistics enterprises and 26 shippers. In addition, by evaluating the importance for Joint logistics business recognition with personnel working level, the weight of measuring variable was extracted. This study has built an assessment tools (LPCI) on Joint logistics business cooperation level in a situation where there are no previous studies on joint logistics business, this study is meaningful for other studies. Results - As a result of analyzing LPCI presented in this study, the score of logistics enterprise was represented as 59.9 points based on full score of 100 points and that of shippers as 47.2 points and cooperation level among enterprises participated in Joint logistics business was revealed to be very low. In particular, as a result of measuring the importance between logistics enterprise and shippers, the difference by each measurement standard was represented among those enterprises. This difference is considered to be a key factor that cooperative operational conformity between logistics enterprises and shippers is represented to be low. Conclusions - As most joint logistics business, being promoted at present, is sharing facility and information with joint logistics business, it is hard to find such a joint logistics business in reality based on cooperative business model in main cooperation agents. Therefore, competitiveness of logistics industry could be strengthened by promoting joint logistics business based on their mutual cooperation among enterprises. In other words, it is to secure sustainable competitiveness of joint logistics business together with creation of new market by inter-enterprise cooperation based on integration of basic logistics business.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.97-104
• /
• 2015

Purpose - The distribution of agricultural products is changing due to recent shifts in environmental free trade. Specifically, the competitiveness of domestic agricultural products has weakened as a result of the Korea-China Financial Trade Agreement. Agricultural producers are faced with increasing difficulties and organized production centers are growing in importance daily. To overcome this crisis, agricultural producer organizations are vying for environment-friendly agricultural certifications, Good Agriculture Practices (GAP) and Hazard Analysis and Critical Control Point (HACCP). In particular, as consumer demand for higher safety grows, farmers are increasing their certification rates. Therefore, this certification system is expected to help strengthen the competitiveness of agricultural producer organizations. Research design/data/methodology - Organized production centers are classified by certification. A survey was conducted with 91 organizations using factor analysis and logistic regression analysis for the examination. The factor analysis results are as follows. Raw material procurement, education·specialization, marketing, joint business, organizing ability, business management, effectiveness, certification, and larger organizations were classified as the nine types of factors. These factors affect the organized production centers and are used in the logistic regression analysis. The purpose of such research and analysis is to suggest a direction for future production center policies. Results - The basic statistical results are as follows: analysis of the producer organizations of 91 sites, average number of members per site of 1,624, and average sales of 25,961 million won. Additionally, the average income per farmer is 175 million won, and the pooling system rate is 53.5%. The factor analysis results are as follows. Factor 1 consists of contract cultivation, ongoing shipment, selection subdivision, traceability, and major retailer management. Factor 2 consists of manual cultivation, specialty selection, education program, and R&D. Factor 3 consists of advertising, various dealers, various sales strategies, and a unified sales counter. Factor 4 consists of agricultural materials co-purchase, policy support, co-shipment, and incentives. Factor 5 consists of the co-selection and pooling system. Factor 6 consists of co-branding and operating by the organization's article. Factor 7 consists of the buy-sell ratio and rate of operation of the agriculture promotion center. Factor 8 consists of bargaining power in volume and participation rate of farmer certification. Factor 9 consists of increasing new subscribers. The logistic regression analysis results are as follows. Considering the results by type of certification, the environment-friendly agricultural certification type and the GAP certification type have a (+) influence. GAP and HACCP certification types affecting the education·specialization factor have a (+) influence. Considering the results for each type of certification, the environment-friendly agricultural certification types on the effectiveness factor have (-) influence; the HACCP certification types on the organizing ability and effectiveness factor have a (-) influence. Conclusions - Agricultural producer organizations should develop plans as follows: The organizations need to secure education for agricultural production; increase the pooling system ratio for sustainable organizational development; and, finally, expand the number of agricultural producer organizations.