• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.137-143
• /
• 1997

In this study, handling simulation of a passenger car is carried out to see the effects of suspension compliance, roll stabilizef bar and chassis flexibility. The front suspension of the car is a MacPherson strut type and the rear suspension is a multi-link type. The following five DADS models are constructed and compared to verify the effects of suspension compliance and chassis flexibility during lane change. (1) Vdhicle model without hard point compliance and stabilizer, (2) Vehicle model with hard point compoiance, (3) Vehicle model with hard point compliance and stabilizer, (4) Vehicle model with hard point compoiance, stabilizer, and one vibration mode of the chaxxis. (5) Vehicle model with hard point compliance, stabilizer, and three vibration modes of the chassis. The result shows that hard point compliance and stabilizer are significant in roll angle, and the flexibility of the chassis affects the yaw angle and yaw rate.

• Journal of Mechanical Science and Technology
• /
• v.17 no.8
• /
• pp.1133-1139
• /
• 2003

In this paper, a numerical algorithm for the kinematic analysis of a multi-link five-point suspension system is presented. The kinematic analysis is carried out in terms of the rectangular Cartesian coordinates of some defined points in the links and at the joints. Geometric constraints are introduced to fix the relative positions between the points belonging to the same rigid body. Position, velocity and acceleration analyses are carried out. The presented formulation in terms or this system of coordinates is simple and involves only elementary mathematics. The results of the kinematic analysis are presented and discussed.

• Structural Engineering and Mechanics
• /
• v.68 no.5
• /
• pp.633-638
• /
• 2018

One of the important problems in the vehicle design is vehicle handling and stability. Effective parameters which should be considered in the vehicle handling and stability are roll angle, camber angle and scrub radius. In this paper, a planar vehicle model is considered that two right and left suspensions are double wishbone suspension system. For a better analysis of the suspension geometry, a kinestatic model of vehicle is considered which instantaneous kinematic and statics relations are analyzed simultaneously. In this model, suspension geometry is considered completely. In order to optimum design of double wishbones suspension system, a multi-objective genetic algorithm is applied. Three important parameters of suspension including roll angle, camber angle and scrub radius are taken into account as objective functions. Coordinates of suspension hard points are design variables of optimization which optimum values of them, corresponding to each optimum point, are obtained in the optimization process. Pareto solutions for three objective functions are derived. There are important optimum points in these Pareto solutions which each point represents an optimum status in the model. In other words, corresponding to any optimal point, a specific geometric position is determined for the suspension hard points. Each of the obtained points in the Pareto optimization can be selected for a special design purpose by designer to create an optimum condition in the vehicle handling and stability.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.514-520
• /
• 2015

The effects of suspension stiffness on the reaction load of the gearbox suspension for a three-point suspension wind turbine drive train were investigated by finite element analysis. The reaction forces of the gearbox suspension appear to increase as the gearbox suspension stiffness increases; however, the main bearing stiffness has a reverse effect on the reaction forces. The influence of the gearbox suspension stiffness is greater than that of the main bearing. Since the suspensions must provide the gearbox with proper support, it is not practical to use soft gearbox suspension for small reaction forces. It is more feasible to use stiff main bearings. As a guideline for the main bearing stiffness in the present study, we propose a relative stiffness of 100-150% of the reference.

• Journal of Korean Society on Water Environment
• /
• v.26 no.2
• /
• pp.326-331
• /
• 2010

Montmorillonite is one of representative inorganic clay particles. As the characteristics of clay particulate matter in aqueous environment determine the efficiencies of wastewater treatment and some industrial operations, it is essential to understand its aquatic behavior in relation with turbidity. The change of electrokinetic potential of montmorillonite suspension shows that it tends to negatively increase as the pH of suspension increases. In addition, it is observed that its potential is around 0mV when the solution pH is ca. 5. The turbidity of suspension is shown to be very low when pH is lower than its isoelectric point. However, the turbidity gradually enhances according to beyond isoelectric point. These results reveal that the correlation between electrokinetic potential and turbidity for clay mineral suspension is peculiar which should be fundamentally considered for systematic treatment of wastewater.

• Korean Journal of Mathematics
• /
• v.16 no.1
• /
• pp.1-24
• /
• 2008

Let $Lu=u_{tt}+u_{xxxx}$ and E be the complete normed space spanned by the eigenfunctions of L. We reveal the existence of six nontrivial solutions of a nonlinear suspension bridge equation $Lu+bu^+=1+{\epsilon}h(x,t)$ in E when the nonlinearity crosses three eigenvalues. It is shown by the critical point theory induced from the limit relative category of the torus with three holes and finite dimensional reduction method.

• Proceedings of the Korean Reliability Society Conference
• /
• 2002.06a
• /
• pp.227-233
• /
• 2002

Suspension system is one of the most important components indespensible for stability and reliability of automobiles. The demands to more safe and durable suspension system have been increased as the automobiles get popular and improve in quality. The crack in the coil spring of the suspension system produced during manufacturing may grow under a fatigue load and cause a severe safety problems which lead to a catastrophic damage to the passengers. Many conventional NDT techniques including ET, RT, and UT are less sensitive or hard to apply to detect the surface breaking crack in the suspension coils partly because the techniques are point-to-point measurement methods, thus take too long time to inspect the coil spring longer than 1m. Contrary to this, Lamb wave technique is full-field measurement method that make it possible to examine the whole coil spring in real time. In this paper, the Lamb wave is applied to the coil spring to investigate the possibility to detect the cracks on the surface of the coil spring.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.293-300
• /
• 2003

It was investigated that effect of suspension and electrolyte concentrations on zeta potential of alumini suspension and Iso-Electric Point(I.E.P.). The alumina powders in 0.1∼l $\mu\textrm{m}$ particle size distribution, and the electrolyte NH$_4$NO$_3$ were used for preparing the suspension and electrophoresis method was used for measuring zeta potential in this work. As the concentration of suspension was increased, zeta potential and the I.E.P. were increased, respectively. On the other hand, as the electrolyte concentration was increased, the I.E.P. was decreased. As a result of this work, the best condition for measuring zeta potential was the 0.01 wt% and 10 mM of the suspension and the electrolyte concentration, respectively.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.2
• /
• pp.97-104
• /
• 2016

In this study, the qualitative effects of the positional error of carrier pin holes on the planet load sharing characteristics of the three-point suspension gearbox of wind turbines were investigated experimentally. A 35-kW gearbox comprising two planetary gear stages and a parallel gear stage and size one-fourth of that of a 2-MW three-point suspension gearbox was used as the test gearbox. The strain gauges attached to the ring gear teeth of the input planetary gear stage were used for the purpose of this study. The applied loading conditions were 50%, 75%, and 100% of the rated torque, and the mesh load factor was used as the load sharing index. The experimental results indicated that both the magnitude and direction of the positional error of pin holes had a significant effect on the planet load sharing characteristics of the three-point suspension gearbox. In addition, an increase in the applied torque results in uniform load sharing.

• Korean Journal of Mathematics
• /
• v.15 no.1
• /
• pp.1-11
• /
• 2007

It is well known that a suspension bridge may display certain oscillations under external aerodynamic forces. Under the action of a strong wind, in particular, a narrow and very flexible suspension bridge can undergo dangerous oscillations. So it would be very contributive to determine under what conditions a similar situation cannot occur, and find out safe parameters of the bridge construction. In this paper, we investigate relations between the multiplicity of solutions and nonlinear terms in this suspension bridge equation using critical point theorem and linking theorem.