• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.959-967
• /
• 1988

본 연구에서는 반능동형 감쇠기의 작동기준을 설정하고 그것의 타당성을 조사 하는 것이 주목적이어서 속도에 대한 고려는 제외하였다.이때 반능동형 감쇠계가 고정된 감쇠계수를 갖는 감쇠기로 구성된 계보다 얼마만큼 성능이 향상되며 능동형 감 쇠기(감쇠계수를 제한된 영역내에서 순간순간 조절하여 변화시킬 수 있는 감쇠기)를 갖는 계에 얼마만큼 접근하는가가 비교되어진다.

• Journal of Plant Biotechnology
• /
• 제1권2호
• /
• pp.117-121
• /
• 1999

Effects of jasmonic acid treatment, UV-B and white light treatment on the anthocyanin biosynthesis and cell growth were investigated using the cell suspension culture system of grape (Vitis vinifera L.). Cell growth was not affected by white light irradiation, while it was remarkably suppressed by UV-B irradiation from 8 to 32 h. Anthocyanin accumulation dramatically increased after 16 h from irradiation of UV-B. Simultaneous treatment of jasmonic acid and UV-B increased anthocyanin accumulation by 10-fold. The cell division was restored when anthocyanin was abundantly accumulated after 32 h from UV-B irradiation. Optimum concentration of jasmonic acid was found to be 5 uM for maximum accumulation of anthocyanin. Application of jasmonic acid to grape suspension cells rapidly induced the expression of CHS gene after 2 h from treatment and showed maximum level at 32 h. Simultaneous treatment of jasmonic acid and light also induced CHS gene expression after 2 h, but the maximum level of CHS transcript was observed at 16 h with white light and 8 h with UV-B exposure. The synergistical effects could be explained by the defense mechanism that UV irradiation is mediated in part by alterations in JA and its signaling pathway.

• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.71-78
• /
• 1999

본 논문은 외부에서 공급받는 에너지 대신에 현가 시스템 자체에서 전기에너지를 발생시켜 전기우동(electro-rheological, 이후ER)유체를 제어하는 새로운 형태의 ER 진동 제어장치를 제안한다. 이를 위하여 에너지 재생 메커니즘을 개발하고 진동에너지를 재생 전기에너지로 환원하여 축적시켰으며, 상기에서 얻어진 저전압을 ER제어 할 수 있는 고전압(1KV-6KV)으로 승압시켜 ER 현가 장치에 적용하였다. 한편 제안된 장치의 성능 향상을 목적으로 재생 에너지의 충전장치, 고전압 발생장치, 전기제어장치, 신호감지장치를 설계하여 ER 현가 장치의 동특성 시험을 행하고 충격제어 능력을 평가하여 실용화 할 수 있는 기반을 구축하였다.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.12-17
• /
• 2017

In this paper, causes of wear on high pressure seals for suspension are analyzed, and the result of reproduction test and verification on improved design are described. First, by performing the observation of worn surfaces and its failure analysis, the primary cause of wear on the seals are analyzed. The result of analysis shows that the main failure mechanism of wear is a fatigue wear, and test criteria for failure reproduction are set up with consideration for frequency condition, surface roughness and pressure. Durability comparison test on the condition of low amplitude and high frequency is carried out. And, it is found that the durability of wear on seals by increasing hardness of cylinder and managing for surface roughness is enhanced.

• Wind and Structures
• /
• 제30권5호
• /
• pp.499-509
• /
• 2020

The aeroelastic stability of a long-span suspension footbridge with a bluff deck (prototype section) was examined through static and dynamic wind tunnel tests using a 1:10 scale sectional model of the main girder, and the corresponding aerodynamic countermeasures were proposed in order to improve the stability. First, dynamic tests of the prototype sectional model in vertical and torsional motions were carried out at three attack angles (α = 3°, 0°, -3°). The results show that the galloping instability of the sectional model occurs at α = 3° and 0°, an observation that has never been made before. Then, the various aerodynamic countermeasures were examined through the dynamic model tests. It was found that the openings set on the vertical web of the prototype section (web-opening section) mitigate the galloping completely for all three attack angles. Finally, static tests of both the prototype and web-opening sectional models were performed to obtain the aerodynamic coefficients, which were further used to investigate the galloping mechanism by applying the Den Hartog criterion. The total damping of the prototype and web-opening models were obtained with consideration of the structural and aerodynamic damping. The total damping of the prototype model was negative for α = 0° to 7°, with the minimum value being -1.07%, suggesting the occurrence of galloping, while that of the web-opening model was positive for all investigated attack angles of α = -12° to 12°.

• The Plant Pathology Journal
• /
• 제26권3호
• /
• pp.231-237
• /
• 2010

The heat-inactivated (at $121^{\circ}C$ for 20 min) conidial suspension of Bipolaris cactivora (HICS) was evaluated for the control of Bipolaris stem rot of cactus caused by B. cactivora. Severe rot symptoms were developed on the cactus stem discs inoculated with B. cactivora from 5 days after inoculation. However, only small brownish spots developed on the stem discs treated with HICS 2 days prior to the pathogen inoculation. HICS also reduced symptom development on cactus stem discs inoculated with other fungal pathogens such as Alternaria alternata, Colletotrichum gloeosporioides, and Fusarium oxysporum, suggesting its disease-inhibitory efficacy may not be pathogen-specific. HICS significantly reduced severities of the stem rot disease on several cactus species including Hylocereus trigonus, Cereus peruvianus, Chamaecereus silvestrii and Gymnocalycium mianovichii, but not on Cereus tetragonus. Extensive wound periderms were formed in the stem tissues of inoculation and/or wounding sites on C. peruvianus treated with HICS alone or prior to the pathogen inoculation, but not on C. tetragonus, indicating the structural modifications may be related to the mechanism of disease suppression by HICS. HICS also reduced the disease development on the grafted cactus (H. trigonus stock and G. mianovichii scion) with the control efficacy nearly equivalent to the application of a commercial fungicide. All of these results suggest HICS can be used as an environmental-friendly agent for the control of the cactus stem disease.

• Journal of Pharmaceutical Investigation
• /
• 제25권4호
• /
• pp.331-338
• /
• 1995

In order to screen appropriate preservatives for the suspension containing sucralfate, neusilin and hydrotalcite, the patterns and mechanism of the adsorption and desorption of several preservatives on these antacids were studied. The employed preservatives were parabens(methyl, propyl, butyl), chlorhexidine diacetate and sorbic acid. While none of parabens were adsorbed on three antacids, chlorhexidine diacetate was strongly adsorbed on all the antacids employed, especially on hydrotalcite. Sorbic acid was not adsorbed on neusilin and hydrotalcite, however, 65% of sorbic acid was adsorbed on sucralfate. The adsorption of chlorhexidine diacetate on neusilin and hydrotalcite was partly physical and partly chemical, while its adsorption on sucralfate was almost chemical. Sorbic acid was completely deserted from sucralfate. In all cases, the adsorption isotherms were fitted well to both Freundlich equation and Langmuir equation. Based on these results, parabens and sorbic acid were the preservatives of choice for the suspension containing sucralfate, neusilin and hydrotalcite.

• Journal of Plant Biology
• /
• 제30권4호
• /
• pp.277-285
• /
• 1987

Undifferentiated suspension cells had the ability to transfer glucose and fructose actively, but the suspension culture cells were unable to transfer saccharide without previously splitting to monosccarides. The uptake of fructose showed the low- and high-affinity system compared to of glucose, which possessed only one saturable uptake system. In this paper, the low affinity system of the uptake of fructose has been studied intensively. Glucose did not inhibit the low affinity system of fructose competitively. The Km value was 47 mM for fructose, 7.4 mM for glucose and Vmax was 69 $\mu$mol/h.g fresh weight for fuctose, 9.8 $\mu$ mol/h.g fresh weight for glucose. Metabolizer inhibitors, both 50 $\mu$M of CCCP and DNP, inhibited 70% of the uptake of the low affinity system of fructose. The proton ions were accompanied by the uptake of fructose. The stoichiometry showed ratio of proton to fructose was 0.17. The mechanism ofthe uptake was fructose-proton-symport. The molecules of fructose accmululated inside 25 times more than outside. Therefore, the low affinity system of fructose was not mere diffusion, but depended on metabolic energy and thus transported actively. The importance of this system was discussed.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 1994년도 Proceedings of International Symposium on BIOLOGICAL CONTROL OF PLANT DISEASES Korean Society of Plant Pathology
• /
• pp.50-61
• /
• 1994

Biological control of important fungal diseases such as Phytophthora blight of red pepper, gary mold rot of vegetables, and powdery mildew of many crops was attempted using an antagonistic bacterium, Bacillus sp. AC-1 in greenhouses and fields. The antagonistic bacterium isolated from the rhizosphere soils of healthy red pepper plant was very effective in the inhibition of mycelial growth of plant pathogenic fungi in vitro including Phytophthora capsici, Rhizoctonia solani, Pyricularia oryzae, Botrytis cinerea, Valsa mali, Fusarium oxysporum, Pythium ultimum, Alternari mali, Helminthosporium oryzae, and Colletotrichum gloeosporioides. Culture filtrate of antagonistic Bacillus sp. AC-1 applied to pot soils infested with Phytophthora capsici suppressed the disease occurrence better than metalaxyl application did until 37 days after treatment in greenhouse tests. Treatments of the bacterial suspension on red pepper plants also reduced the incidence of Phytophthora blight in greenhouse tests. In farmers' commercial production fields, however, the controlling efficacy of the antagonistic bacteria was variable depending on field locations. Gray mold rot of chinese chives and lettuce caused by Botrytis cinerea was also controlled effectively in field tests by the application of Bacillus sp. AC-1 with control values of 79.7% and 72.8%, respectively. Spraying of the bacterial suspension inhibited development of powdery mildew of many crops such as cucumber, tobacco, melon, and rose effectively in greenhouse and field tests. The control efficacy of the bacterial suspension was almost same as that of Fenarimol used as a chemical standard. Further experiments for developing a commercial product from the antagonistic bacteria and for elucidating antagonistic mechanism against plant pathogenic fungi are in progress.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.17-23
• /
• 2005

In this study, the high strength and superior toughness spring steels as the suspension material, used for automobile and railroad industries were utilized to carry out the following investigations. Corrosion times were controlled in 7, 14,30 and 60days to examine the relation between corrosion pit and compressive residual stress in the static corrosion environment after shot peened. And then corrosion current and corrosion potential were measured for every 24 hours to investigate the corrosion mechanism. Shot peened material shows the low or rate of corrosion current as compared with unpeened material. In case of hot peened material which has the highest residual stress, it has a low corrosion current density.