• 한국전자파학회논문지
• /
• 제25권2호
• /
• pp.199-207
• /
• 2014

고 고도 전자기 펄스(HEMP: High-altitude Electromagnetic Pulse)용 필터는 펄스 전류 주입(PCI: Pulsed Current Injection) 인수시험을 통해 인수기준을 충족하더라도, 실제 부하 장비를 연결하여 장비 운용 상태에서 실시하는 PCI 검증 시험수행 시에는 부하 장비의 전자기 전도 내성 수준에 따라서 장비가 손상될 수도 있다. 본 논문에서는 HEMP 방호시설에서 PCI 검증 시험 수행이 어려운 경우, 이에 대한 방안으로서 HEMP 필터의 PCI 인수시험 잔류 전류 측정값과 부하 장비의 과도 전자기 전도 내성 기준 값에 대한 특성인자(norm) 비교를 통해 필터 잔류 전류가 부하 장비에 미치는 영향분석 방법을 제안하였다. C4I(Command, Control, Communications, Computer, and Intelligence) 쉘터용으로 제작된 HEMP 필터와 쉘터 탑재장비를 활용하여 HEMP 필터 PCI 인수시험, 과도 전자기 전도 내성 시험 및 PCI 검증 시험을 수행하였고, 결과를 분석하였다.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.84-89
• /
• 2007

MIL-STD-461E, EMI military standard for the equipment and subsystems, requires reception characteristic tests to verify the susceptibility of a receiver against the jntermodulation and spurious signals. Because the CS103 and CS104 of MIL-STD-461E show the test configuration of the equipment unit like a traditional receiver, it is possible to verify the susceptibility only for the reception signal through analog filters. However, at present when software programming techniques make a progress, the CS103 and CS104 tests need to evaluate the reception signal of the subsystem which includes both the digital filtering effects and analog filter characteristics. These test and evaluation techniques applied to a surveillance radar subsystem. This paper researched the EMI test methods in order to confirm feasibility of these test and evaluation techniques. Also the test results are compared and analyzed.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1123-1132
• /
• 1996

It has been reported that high temperature structural components represent the phenomenon of material degradation according to a long term service under high temperature and pressure. Especially, fossile power plant components using the fossil fuel and heavy oil are affected by dewpoint corrosion of $H_2SO_4$produced during a combustion. Therefore, the service materials subjected to high temperature and pressure may occur the stress corrosion cracking. The object of this paper is to investigate SCC susceptibility according to the material degradation of the high temperature structural materials in dewpoint corrosive environment-$H_2SO_4$.The obtained results are summarized as follows : 1) In case of secondary superheater tube, the fractograph of dimple is observed at the concentration of $H_2SO_4$-5%. When the concentration of $H_2SO_4$ is above 10%, the fracture mode is shifted from a transgranular fracture to an quasi-intergranular fracture according to the increment of concentration. 2) In the relationship between [$\Delta$DBTT]$_sp$ and SCC susceptibility, it is confirmed that the greater material degradation degree is, the higher SCC susceptibility is. In addition, it can be known that SP test is useful test method to evaluate SCC susceptibility for high temperature structural components. 3) When [$\Delta$DBTT]$_sp$ is above 17$17^{\circ}C$ the SCC fracture behavior is definitely observed with SCC susceptibility of above 0.4.

• Journal of Yeungnam Medical Science
• /
• 제10권1호
• /
• pp.28-36
• /
• 1993

1992년 12월부터 1993년 4월까지 영남대학교 의과대학 부속병원 임상병리과 세균검사실에 의뢰된 입원환자전체를 대상으로 1차 항생제 감수성 검사에서 모든 항생제에 내성을 보인 그람음성간균에 대해 2차 항생제 감수성 검사를 실시하여 그 결과를 분석하였다. 1차 항생제 감수성 검사에서 모든 항생제에 내성을 보인 균주의 빈도는 A. baumanni, E. cloacae, E. coli, P. aeruginosa, Serratia species순이었다. 소변에서는 기본 항생제에 내성을 보인 균종은 E. coli가, 호흡기와 창상감염에서는 A. baumanni가 가장 많았으며, P. aeruginosa는 모든 검체에서 높은 빈도로 분리되었다. 2차 항생제 감수성 검사에서 전 검체의 53%가 모든 2차 항생제에 대해 내성을 보였다. ceftazidime, aztreonam, ciprofloxacine 등은 상대적으로 항균효과가 높았으나 cefamandole은 모든 균종에서 효과가 없는 것으로 나타났다.

• 한국임상수의학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2001

The aim of this study was to determine optimal therapeutic dose of antifungal agents for dermatophytes. Forty nine dermatophytes were isolated form dogs and cats showing skin lesions and were tested for their in vitro susceptibility to nystatin, griseofulvin, terbinafine, ketoconazole and fluconazole by broth microdilution test. Terbinafine showed the lowest MIC value among the antifungal agents tested, and MIC values ranged from 0.002 to 0.016 $\mu\textrm{g}$/ml. Fluconazole showed the highest MIC values among the antifungal agents tested, and MIC values ranged from 32 to 512 $\mu\textrm{g}$/ml. MIC values of nystatin, griseofulvin and ketoconazole ranged from 1.12 to 4.48 $\mu\textrm{g}$/ml, 0.5 to 4.0 $\mu\textrm{g}$/ml, and 1.6 to 12.8 $\mu\textrm{g}$/ml, resistant to griseofulvin, and that antifungal susceptibility test was needed to determine optimal therapeutic dose of antifungal agents for each dermatophyte.

• 한국항공우주학회지
• /
• 제42권10호
• /
• pp.878-883
• /
• 2014

본 논문에서는 2014년 6월 20일에 발사된 스페인의 저궤도 위성인 Deimos-2 발사모델의 시스템 레벨 전자기파(EMC) 테스트 결과를 나타내었다. Deimos-2 위성은 구조적인 측면과 더불어 단위 모듈 레벨에서부터 EMC를 고려한 설계가 이루어졌다. Auto-Compatibility, Radiated Emission, Radiated Susceptibility 테스트를 수행하였고, 측정 결과는 Deimos-2 프로그램의 시스템 EMC 기준을 만족하였다.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2407-2418
• /
• 2023

Internal replaceable electronic module substitutions can impact EMC (ElectroMagnetic Compatibility) qualification testing and results if EMC testing is conducted at the cabinet level. The impact of component substitutions on EMC qualification results therefore should be evaluated. If a qualitative evaluation is not adequate to ensure that the modified product will not impact the cabinet level EMC qualification results, a new qualification testing should be conducted. Component level retesting should be conducted under electromagnetically equivalent conditions with the cabinet level test. This paper analyzes the propagation of conducted susceptibility test waveforms in a representative cabinet and evaluates the impact of component substitutions on cabinet level EMC qualification results according to the location of the replacement items. A guideline for a qualitative evaluation of the impact of component substitutions is described based on the propagation of the conducted susceptibility test waveforms. A module level test method is also described based on an analysis of the shielding effectiveness of the cabinet.

• Investigative Magnetic Resonance Imaging
• /
• 제22권3호
• /
• pp.141-149
• /
• 2018

Purpose: The purpose of this study is to develop a simple method to measure magnetic susceptibility of arbitrarily shaped materials through MR imaging and numerical modeling. Materials and Methods: Our 3D printed phantom consists of a lower compartment filled with a gel (gel part) and an upper compartment for placing a susceptibility object (object part). The $B_0$ maps of the gel with and without the object were reconstructed from phase images obtained in a 3T MRI scanner. Then, their difference was compared with a numerically modeled $B_0$ map based on the geometry of the object, obtained by a separate MRI scan of the object possibly immersed in an MR-visible liquid. The susceptibility of the object was determined by a least-squares fit. Results: A total of 18 solid and liquid samples were tested, with measured susceptibility values in the range of -12.6 to 28.28 ppm. To confirm accuracy of the method, independently obtained reference values were compared with measured susceptibility when possible. The comparison revealed that our method can determine susceptibility within approximately 5%, likely limited by the object shape modeling error. Conclusion: The proposed gel-phantom-based susceptibility measurement may be used to effectively measure magnetic susceptibility of MR-compatible samples with an arbitrary shape, and can enable development of various MR engineering parts as well as test biological tissue specimens.

• 한국동물위생학회지
• /
• 제28권4호
• /
• pp.407-412
• /
• 2005

Ten isolates of Verotoxin-producing Escherichia coli (VTEC) were detected in slaughtered cattle and investigated their phenotypic characteristics and antimicrobial susceptibility. None of the isolates was positive for eae gene. Only one isolate was positive for uidA gene. Eight out of ten isolates of VTEC were originated from broker's cattle. Thus microbiological monitoring for broker farms should be performed to minimize VTEC contamination. In the antimicrobial susceptibility test, all the isolates were highly resistant to bacitracin and lincomycin whilst they are susceptible to apramycin and neomycin.

• Journal of Microbiology and Biotechnology
• /
• 제9권3호
• /
• pp.328-333
• /
• 1999

Susceptibility of 61 strains of Helicobacter pylori to metronidazole was examined by both the disk diffusion method using a cut-off of 15㎜ for resistance and the E test with a cut-off of 8㎎/l. The MIC/sub 50/ and MIC/sub 90/ by the E test were 2 ㎎/l and 256㎎/l, respectively. Metronidazole resistance was found in 22 (36％) out of the 61 H. pylori strains by the E test and in three additional strains by the disk diffusion method. Amongst the latter three isolates, the MICs by the E test were 4 ㎎/l, 6㎎/l, and 6㎎/l, respectively. These figures are one log₂ or half log₂ dilution lower than the cut-off of 8㎎/l recommended as resistance for the E test. All 22 metronidazole resistant H. pylori isolates by the E test that were subjected to random amplified polymorphic DNA (RAPD) fingerprinting showed different DNA fingerprints. Interestingly, >90％ of resistant isolates possess two common DNA bands of 0.4 and 0.9 kb. This study demonstrates that the results of the disk diffusion method for testing H. pylori susceptibility to metronidazole correlates well with that of the E test. The criteria for interpretation need to be internationally standardized so that the results from different centers can be compared.