• Journal of the Korean Society for Library and Information Science
• /
• v.7
• /
• pp.89-195
• /
• 1980

The advanced developing countries including Korea are assumed to have reached a developmental stage which necessitates them to formulate and implement a plan for a national information network. Most of the governments in the advanced developing countries are well aware of the necessity for such a plan and some of them have actually commenced their studies on the feasibility of a national network of their own hoping to achieve maximum utility of their limited information resources. Two urgent problems facing planners in the design of a national information network are identified. One is lack of an optimum organisational model to enable them to meet their own situations, and the other is lack of a guideline to help designers evaluate the alternative structures and models when they are available. In resolving these two problems, network planners in the advanced developing countries would benefit from the achievement of the objectives of the present study. The major objective is to elicit and describe common information needs, desires and value of the people using information, and other common factors which are responsible for the present information services in the advanced developing countries and which have implications for the basic structure of the national information network. The value of this study is to aid administrators in Korea and those in the other advanced developing countries who are responsible for making national policies and who are now beginning to recognise the need for information services with the planning of economic and social development so as to enable all the groups in the community to have access to the information which are essential for decision making, research work, studies and even for recreational reading. This recognition will hopefully give them a rational basis for formulating right policies on information services. The methodology utlised for collecting the required data in this study falls under the category of observation and largely consists of the two techniques: literature review and postal questionnaire. Background information on the individual advanced developing: countries was gathered from monographic and periodical literature. and country reports presented at the various international conferences were analysed for other relevant data. For most of the data needed for the present study, a questionnaire on 'Library and Information Services as They Are Available in the Selected Countries' was formulated. This questionnaire was designed to be completed without help, by an expert who was well informed of the library and information services in his or her country. The questionnaire was intended to look in details at what information services in the advanced developing countries were doing-whom they were serving, in what way, and how well and establish to what extent they were meeting the nation's information requirements. It was also intended to ascertain the respondents' ideas on possible future developments in information provision in their countries, that is, in the advanced devanced developing countries. The questionnaire was posted to a total of 63 natinal librarians, directors of national information centres and those of other major libraries or information centres in 21 selected countries. Complete usable responses were received from 34 persons in 14 countries. In order to identify common characteristics of the information needs and desires in the advanced developing countries and the present situation of the information services to meet them, and the requirements and constraints peculiar to those countries which bought to be considered in the design of a national information network for advanced developing countries, an individual report on the current status of information activities for each of the fourteen countries chosen for this study, was presented. The procedure used was to arrange the data acquired in the questionnaire responses and other sources, in the form of fifteen country reports to be summarised by cross-section characteristics later.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.1
• /
• pp.27-40
• /
• 2014

The functions of urban open space, which embraces community revitalization, are diverse. It is the means of public healthcare, learning centers for children, hub of arts and cultural programs, as well as promoter of urban tourism. However, in-depth discourse and research on the topic of urban open spaces has been limited so far. Hence, this study aims to investigate the motivations and satisfaction of visitation based on four representative waterfront open space in Seoul; Cheongyecheon Waterfront, Seoul Forest Park, Seonyudo Park and Banpo Hangang Park. The methods of study are literature review, observation investigation, and questionnaire survey. The findings are analyzed through the Exploratory Factor Analysis, Reliability Analysis, ANOVA Analysis and Regression Analysis by SPSS 18.0. The results of the study are as follows. First, urban waterfront open spaces in Seoul has 5 factors of visitor motivation; community amenity, nature access, cultural and educational assets, aesthetic enjoyment, and lastly means of escape. Second, factors of recognizing urban waterfront open spaces as community amenity and nature access indicate meaningful differences in visitor's perception by spatial characteristics. Third, distances between the destination and the visitor's residence influence significantly their perceived motivation. Close-range visitors perceived nature access as a principal factor, whilst medium to long-range visitors perceived visitation for aesthetic purposes more importantly. Lastly, the will to escape was shown as the influential factor in visitor satisfaction. Visiting open spaces for the enjoyment of nature and aesthetic purposes were factors that also closely relate to visitor satisfaction. In addition, it was found that there are different visitor motivations that influence visitor satisfaction in accordance with the spatial characteristics of each open space. In summary, it can be said that urban waterfront open space is a hybrid space connected to various types of urban contents beyond daily experiences. It was found that several visitor motivations including community development, design aesthetics, education and culture, entertainment, enjoyment of natural landscape, and relaxation, affect the overall satisfaction of the visiting experience. It is anticipated that the results of the study will be used by the local government in setting up strategies for the creation and management of successful urban waterfront open space, and for those involved in planning and design act as a starting point for spatial programming and amenities arrangement in accordance to the city's tourism and urban marketing approach.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.5
• /
• pp.82-92
• /
• 2018

The purpose of this study is to develop a model for the density management of planting sites and an additional model for new planting sites. In the Dongtan New Town of Hwaseong, there are buffer green spaces, with widths between 8m and 15m, between roads and apartment complexes. A total 38 survey plots were set to examine the planting patterns and the density of landscape trees. The Crown Overlapping Index (COI) was developed to assess the level of overcrowding as far as tree growth and development effectively. Pinus strobus recorded the most serious level of overcrowding growth and development. Its average density and average COI were very high at $0.3trees/m^2$ and 35.6%, respectively. There were many areas in which its COI was above 45%. The criteria for density management were set by standardizing the COI into three levels, which were above 45% (Type A), 30~45% (Type B), and under 30% (Type C). A model was proposed to manage poorly growing trees and to develop a model to select and manage trees of similar specification based on the planting patterns. The trees of density management areas were reviewed in terms of tree types and the ease of transplanting to establish an application system for the management plans according to the possibility of transplanting, thinning, and pruning. In new buffer green spaces, the planting density of Pinus strobus was lowered to $0.20{\sim}0.25trees/m^2$, with that of shrubs being reduced to $1.5{\sim}2.0trees/m^2$, leading to a planting design model to cover the lower parts in at least 30~40%.

• 대한공업교육학회지
• /
• v.43 no.1
• /
• pp.158-176
• /
• 2018

The purpose of this study is to analyze the satisfaction of the manufacturing process and the satisfaction of manufacturing lesson in the lesson of model product manufacturing based on IoT(Internet of Things) for pre-service technology teachers. and we also analyzed 'smart farm' model production manufacturing among various products. The survey questionnaires with 8 questions to investigate satisfaction level of model manufacturing process, difficulties in manufacturing, and the satisfaction level of manufacturing lesson were collected from the 15 pre-service technology teachers and analyzed by using SPSS program. and The results of this study were as follows: First, the lesson satisfaction average level of pre-service technology teachers was high(M=4.22) in model product manufacturing process for the 'smart farm' model making based on the IoT. Second, the average satisfaction level of 'patent search and prior art search report writing education' was as high as 4.07. Therefore, the application of 'prior art search report writing education' showed that it helped to make the product. Third, the best high satisfaction level in the model production manufacturing procedure was 'education of inventive thinking method'(M=4.40). Therefore, the pre-service technology teachers showed that the 'education of inventive thinking methods' was very helpful from the idea design to the optimal selection of idea. The next order of satisfaction level was high(M=4.33) in 'design education and counseling' and 'guidance through selection of professor who guide the production manufacturing in addition to professors who are in charge of lesson'. Because they were helpful in solving the lack of knowledge of pre-service technology teachers. Fourth, satisfaction level with 'the presentation of model making results and exhibitions', 'presentations and participations of external event' was high (M = 4.13). Although the results of interviews with pre-service technology teachers showed that they suffered from lack of knowledge in various technologies, but it was an opportunity to learn things and felt a sense of accomplishment.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.185-201
• /
• 2018

Nuclear power plants(NPP) are constructed and operated to ensure safety against natural disasters and man-made disasters in all processes including site selection, site survey, design, construction, and operation. This paper will introduce a series of efforts conducted in Korea Hydro and Nuclear Power Co. Ltd., to assure the safety of nuclear power plant against earthquakes and other natural hazards. In particular, the present status of the earthquake, fault, and slope safety monitoring system for nuclear power plants is introduced. A earthquake observatory network for the NPP sites has been built up for nuclear safety and providing adequate seismic design standards for NPP sites by monitoring seismicity in and around NPPs since 1999. The Eupcheon Fault Monitoring System, composed of a strainmeter, seismometer, creepmeter, Global Positioning System, and groundwater meter, was installed to assess the safety of the Wolsung Nuclear Power Plant against earthquakes by monitoring the short- and long-term behavioral characteristics of the Eupcheon fault. Through the analysis of measured data, it was verified that the Eupcheon fault is a relatively stable fault that is not affected by earthquakes occurring around the southeastern part of the Korean peninsula. In addition, it was confirmed that the fault monitoring system could be very useful for seismic safety analysis and earthquake prediction study on the fault. K-SLOPE System for systematic slope monitoring was successfully developed for monitoring of the slope at nuclear power plants. Several kinds of monitoring devices including an inclinometer, tiltmeter, tension-wire, and precipitation gauge were installed on the NPP slope. A macro deformation analysis using terrestrial LiDAR (Light Detection And Ranging) was performed for overall slope deformation evaluation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.2
• /
• pp.2262-2275
• /
• 1971

Fourteenes rervoirs maintained by the local land improvement associations in the province of Chullabuk-Do and 20 reservoir maintained by thos in the province of Chullanam-Do, were surveyed in connection with a correction between storage capacity and sediment deposit. In addition to this survey, 3,347 of small reservoir, that lie scattered around in the above-mentioned two provinces were investigated by using existing two provinces were investigated by using existing records pertaining to storage capacity in the office of City and country, respectively. According to this investigation the following comclusions are derived. 1. A sediment deposition rate is high, being about $10.63m^3/ha$ of drainage area, and resulting in the average decreasc of storage capaity by 27.5%. This high rate of deposition coule be mainly attributed to the serve denudation of forests due to disorderly cuttings of trees. Easpecially, in small reservoir, an original average design storage depth of 197mm in irrigation water depth is decreased to about 140mm. 2. An average unit storage depth of 325.6mm as the time of initial construction is decreased to 226mm at present. This phenomena causes a greater shortage irrigation water, since it was assumed that original storage quantity was already in short. 3. Generally speaking, seepage rates through dam abutment intakepipe, etc, are high due to insufficient maintenance and management of reservoir. 4. It is recommended that sediment deposit should be dredged when a reservoir is dry in drought. 5. Farmers usually waste excessive irrigation water. 6. Water saving methods should be practiced by applying only necessary water for growing stage of rice. 7. In are as where water defficiency for irrigation is severe, a soil moisture content should be kept at about 70% by applying water once in several days. 8. Tube wells should be provided so as to exploit ground water and subsurface current below stream bed as much as possible. 9. If an intake weir was constructed, a water collection well should be built for the use in drought. 10. Water conservation should be forced by converting devastated forests contained in the drainage area of reservoir to protected forests so as to take priority of yrefor estation, gully control, the prohibition of disorderly cutting of trees, etc. 11. Collective rice nurseries should be adopted, and it should be recommended that irrigation water for rice nurseries is supplied by farmer themselves. 12. Sediment desposit in reservoir should be thoroughly dreged so as to secure a original design storage capacity. 13. The structure of overflow weir should be automatic so as to freely control flood level and not to increase dam height.

• Journal of dental hygiene science
• /
• v.14 no.1
• /
• pp.67-73
• /
• 2014

This study analyzed 548 pieces of these, which were reported in the Journal of Dental Hygiene Science of having been published from 2001 to Vol. 12, No. 6 in 2012. In conclusion, as for analysis of research design, first, it was the largest in cross sectional research. Second, the research subjects of survey theses were higher in order of dental hygienist and dental hygiene student. Third, number of thesis authors was the largest in order of two persons and three persons. Fourth, statistical method was in order of descriptive statistics, t-test, and ANOVA. Research theme was in order of dental health behavioral science and clinical dental hygiene. Fifth, as for research-expense benefit, only 17.7% was supported research funds. As a result of this study, there should be a research on thesis of diverse designs in the future. There is a need of being performed actively a research on alienated classer or special subjects as well as a research on activity related to dental hygiene.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.4
• /
• pp.95-111
• /
• 2015

This purpose of this study is to academically define what "luxury products" mean, and to clarify the cognitive structural relationship between product attributes and "luxuriousness" in relation to the determinant of luxuriousness that eventually affects the purchase intention of consumers. This study is also written under the theory that luxuriousness leads to benefits such as functional benefit, experiential benefit, symbolic benefit, and exclusive benefit; which all provide core values to consumers and serve as effect factors that influence the psychological satisfaction of consumers. The commonly discussed measure of the determinant of luxuriousness has often failed to adequately describe the reasons to why the consumers prefer luxury products. This study also aims to suggest a new path in how and what the consumers perceive as luxury products, and to conceptualize what luxuriousness means in the marketing perspectives on the background of a previous theory. The part of product attributes are divided in the following sections: the quality and design of functional cues and brands of symbolic cues, as well as prices. The part of the determinant of luxuriousness is divided in sections of superiority, scarcity, differentiation, and traditionality. Therefore, this study used the theoretical concept used in such common measures as well as 282 examples to empirically analyze the relationship between product attributes and luxuriousness of luxury products, and how such affect the purchase intentions of consumers. The survey used to aid this study targeted luxury product consumers regarding "B" brand of automobiles. Using the analysis through a structural equation model, the study draws a conclusion that in a relationship between product attributes and luxuriousness, quality(which is one of the functional cues) affects the facts of superiority, differentiation in a significant way, and design affects the factors of scarcity in a significant way. And brand(one of the symbolic cues) significantly affects the factors of traditionality within the luxuriousness factors, and price appeared to affect superiority and scarcity. Additionally, the brand of product attributes significantly affects purchase intention, and superiority and scarcity of luxuriousness affects purchase intention in a significant way. The structural concept of luxury and luxuriousness suggested in the study will provide the theoretical basis for building a new case study, and the determinants of luxuriousness in the marketing perspective will be a practical help for checking the consumers' psychological reasons for purchase.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.107-115
• /
• 2018

PURPOSES : As the population of the mobility handicapped, who are classified as the disabled, the elderly, pregnant women, children, etc., has increased, the voices for guaranteeing their rights have been increasing as well. Thus, the design manuals for roads and sidewalks for the mobility handicapped were developed by the local government, such as the Ministry of Land, Transport, and Tourism, in Seoul City. However, according to the 2013 survey results of the Seoul Metropolitan City, the mobility handicapped still feel uncomfortable with the sidewalks, and particularly request for the improvement of the step and slope of the sidewalk curb. Therefore, in this study, we conducted an empirical experimental study to determine the slope of the sidewalk curb and height of the steps considering the mobility handicapped and analyzed whether there is a statistically significant difference. METHODS : The methodology of this study is an empirical experimental one. In the study, five non-disabled people, 10 wheelchair users, and 10 eye patch and stick users walked about 2-3 min on the sidewalk plates of the sloped type (0%, 5%, 6.3%, 8.3%) and stepped type (0 cm, 1 cm, 3 cm, 6 cm), and their human physiological responses, such as the skin temperature, volume of perspiration on forehead and chest, and heart rate, were measured and recorded. After combining the data, we conducted a nonparametric test, ANOVA, or t-test to determine whether there was a statistically significant difference according to each slope and step type. RESULTS : It was found that for the non-disabled, there was no significant difference in human physiological responses according to the slope and steps of the sidewalk. It can be said that the non-disabled do not feel much physiological discomfort while walking. In the case of the sloped sidewalk plate, the heart rate of the wheel chair users increased when the slope was 6.3%. In the case of the eye patch and stick users, the volume of perspiration on the chest increased at a slope of 5.0%. In general, it is judged that a sidewalk with a slope that is less than 5% does not cause a change in the physiological response. In the case of a stepped sidewalk plate, when 0 cm, 1 cm, and 3 cm were compared for wheelchair users, the amount of forehead perspiration increased from 1 cm. Meanwhile, in the case of the eye patch and stick users, when 0 cm and 6 cm were compared, the amount of perspiration on the forehead and chest as well as the heart rate all increased at 6 cm. Taken together, in the case of wheelchair users, a difference was shown when the height of the step of the sidewalk plate was 1 cm, suggesting that installing it at 0 cm does not cause any physiological discomfort. Moreover, in the case of the eye patch and stick users, when comparing only 0 cm and 6 cm, 0 cm was considered to be suitable, as there was a difference in physiological response at 6 cm. CONCLUSIONS : In this study, we set the human physiological responses such as chest skin temperature, amount of perspiration, and heart rate as evaluation items, and our study was considered to be a meaningful experiment that targeted wheelchair users as well as eye patch and stick users. The validity of the evaluation items was confirmed, as the results of human physiological responses were significant. As for the sidewalk design, according to the experiment result, it is considered that differential application should be implemented according to the type of mobility handicap, rather than uniformly applying a sidewalk step of 2 cm and sidewalk slope of 1/25, which are the current legal standards.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.