• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.233-237
• /
• 2014

According to advance of radar technology and increase of air threat, 3D surveillance radars are preferred as shipboard equipments to shorten reaction time. In this paper, reaction time against air target was calculated by simulation in each case, 2D and 3D surveillance radar and it was suggested that a few parameters including purpose of warships, performance of shipboard equipments, threat of surrounding countries and budget to select the reasonable type of radar.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.2
• /
• pp.71-77
• /
• 2017

This paper proposes a low complexity frequency modulated continuous wave (FMCW) surveillance radar algorithm. In the conventional surveillance radar systems, the two dimensional (2D) fast Fourier transform (FFT) method is usually employed in order to detect the distance and velocity of the targets. However, in a surveillance radar systems, it is more important to immediately detect the presence or absence of the targets, rather than accurately detecting the distance or speed information of the target. In the proposed algorithm, in order to immediately detect the presence or absence of targets, 1D FFT is performed on the first and M-th bit signals among a total of M beat signals and then a phase change between two FFT outputs is observed. The range of target is estimated only when the phase change occurs. By doing so, the proposed algorithm achieves a significantly lower complexity compared to the conventional surveillance scheme using 2D FFT. In addition, show in order to verify the performance of the proposed algorithm, the simulation and the experiment results are performed using 24GHz FMCW radar module.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1203-1210
• /
• 2007

The multibeam surveillance radar is a state-of-art of 3D radar technology. It applies the stacked beam-on-received realized by a digital beamformer. In this paper, a method of a low target altitude extraction for multibeam surveillance radar in multipath environmental condition is proposed and investigated. The model of multipath propagation and radar generation produced from the low altitude target in multibeam surveillance radar and the nelder-mead simplex multipath reduction(NMSMR) method which enables a reliable low altitude target extraction in specular reflection situations are described. The proposed algorithm is simulated to confirm the effectiveness of proposed algorithm in accordance with a various of target altitudes and radar frequencies.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.1041-1048
• /
• 2012

We display important test information from radar, telemetry in real time for monitoring and control of guided missile flight test. Clearing test area is the most important thing for safety. Thus, we have to constantly monitor and control ships around the test area. Several maritime surveillance radars are deployed around the test area for that purpose. However, multiple points are displayed for the same target when using multiple surveillance radars and this confuses the test personnel during the mission. In this paper, we suggested a method to solve this problem by analyzing error factor of surveillance radar and comparing the correlation of each radar data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.648-659
• /
• 2018

In this study, both the altitude error due to the refraction and the range error due to the delay in the ionosphere with respect to the frequency are extracted according to the radar elevation to analyze the effect of atmosphere on the space surveillance radar. To achieve this, the radio refractivity profile is modeled using the measured data from domestic weather stations. Then, the altitude-error due to the refraction is extracted using the ray tracing method, and the range error in the ionosphere is extracted according to the frequency. Further, considerations for radar design with respect to the radar error characteristics are discussed based on the abroad space surveillance radar and proposed domestic space surveillance radar. This analysis of the error characteristics is expected to be utilized for the determination of radar location, range of steering, and frequency in the space surveillance radar design.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.120-128
• /
• 2017

The refraction phenomenon of radio waves should be considered to improve the detection accuracy of target altitudes for long-range surveillance radars, however, it is difficult to estimate accurate refractivity of atmosphere for every location. In this paper, we propose the atmosphere evaluation metric(AEM) to estimate atmospheric conditions at target locations using target altitudes obtained from primary surveillance radar(PSR) and secondary surveillance radar(SSR). To verify the suitability of the proposed metric, we observed atmospheric conditions and calculated estimation errors of target altitudes using measured data.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.4
• /
• pp.12-21
• /
• 2015

Due to the influence of Han-la Mountain which is located at the center of Jeju Island, a radar blind sector has been appearing in the south-east, low-altitude area of Jeju Island. Thus, the region is perilous for aircraft using surveillance in this area with the existing radar equipment that is currently available. In addition, as the popularity for domestic leisure aviation is on the rise, the safety in low-altitude area should be guaranteed. Where not only IFR flights but also VFR flights are mainly used. Therefore, immediate measures to the present state of radar blind sector in Jeju Island should be taken into serious account. Regarding the circumstances, this study's purpose is to help secure the aviation safety in Jeju region by analyzing the current air traffic surveillance system in Jeju Island and comprehending its vulnerable factors. Moreover, this study compares secondary radar surveillance system, ADS-B and MLAT(Multilateration) system with factors based on the guidance materials from ICAO Asia and Pacific region office to suggests an adequate surveillance technology considering the regional characteristics of Jeju.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2016

In this paper, we have described the performance improvement of surveillance radar to prevent damage or malfunction of surveillance radar RF head unit due to the strong reflections caused by artificial obstacles at close range. We have proposed a technique to improve the performance of the RF head unit as a solution to overcome the limitations of the operating system and improve radar performance. We have verified the effectiveness of the improvement by comparing the before and after results applied to actual system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1090-1097
• /
• 2007

The multibeam surveillance radar is a state-of art of 3D radar technology. It applies the stacked beam-on-received realized by a digital beamformer. In this paper, a design concept of beamformer and a method of target altitude extraction for multibeam surveillance radar in the normal environmental condition considering no multipath situations are proposed and investigated. The extraction algorithm based on antenna sine space coordinated system in a FFT digital beamformer is described. The proposed algorithm is simulated by 1 look-up table data and confirmed to have consistent results in accordance with a variety of target altitudes and a full radar frequency range.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.337-344
• /
• 2004

A real-time surveillance system of the inshore fishing ground was constructed to identify and detect discrete targets, such as illegal fishing vessels. This paper describes measurements made with a combination of sensors, such as radar, CCTV camera, and GPS receivers, for monitoring the fishing activity of small vessels within the fishing limit zones of the inshore waters. The CCTV camera system was used to confirm detection and to classify the type of target. The location of legal vessels distributed in coastal waters was acquired from each GPS system of ships connected to commercial satellite communication network. The surveillance system was networked via LAN to one host PC with the use of electronic navigational charts (ENC) and a radar link. Radar Target Extractor (RTX) for radar signal processing can be remotely accessed and controlled on existing PC via the internet, from anywhere, at any time. Results are presented that demonstrate the effectiveness of the newly constructed fisheries monitoring system for conducting continuous surveillance of illegal fishing vessels in the inshore fishing ground. The identification of illegal fishing vessels was achieved by comparing radar positions of illegal fishing vessels exceeding the warning limits in the surveillance area with GPS position reports transmitted from legal fishing vessels, and the illegal fishing vessels were marked with red symbols on the ENC screen of a PC. The methods to track the activities of all vessels intruding or leaving the fishing limit zones also were discussed.