• Journal of Technologic Dentistry
• /
• v.7 no.1
• /
• pp.53-59
• /
• 1985

This paper aims to examine baes metal alloy in all its aspects - the roles of elements, the content of every element according to uses, characters, laboratory technique methods and the kind of artificial base metal alloy registered in A.D.A. Specification. The results are as follows; 1. Base metal alloy is used widely bacaues it is rather cheap, but it should be handled appropriately in operating because its quality is bad. 2. Classifying base metal alloy, it is classified into Co-Cr alloy, Ni-Cr alloy, and Ni-Cr-Co alloy according to element, it is classified into partial denture alloy, surgical alloy and crown & bridge alloy according to use. 3. Among elements of base metal alloy, Bellium lowers the melting point of the alloy and increases the strength, but the amount should be limited when it is used because it destroys the organization of a living body. 4. The investments for base metal alloy are ethyl silcate bonded investment and phosphate bonded investment which endure well at high burn out temperature. 5. A.D.A specification No.14 in Kore contains Niranium, Nobilium, regalloy, Ticonium and Vitallium.

• Korean Journal of Food Science and Technology
• /
• v.53 no.2
• /
• pp.213-217
• /
• 2021

Benign prostate hyperplasia (BPH) is one of the most common elderly disease, and because of prolonged incubation period and many side effects of medication or surgical interventions, the use of dietary phytochemicals is considered as an effective measure for prevention of BPH. The purpose of this study is to investigate the mechanism of inhibition effect for BPH by flavonoids such as baicalein and kaempferol. BPH cells were collected through biopsy from patients with PSA of 4 or higher, followed by primary culture. In vitro experiments were conducted to evaluate mitochondrial respiration, intracellular reactive oxygen species (ROS) level and expression of inflammatory markers, genes, and anti-oxidants. In conclusion, baicalein and kaempferol have been demonstrated to inhibit BPH through lowering ROS, thereby reducing inflammation triggers, and reduced inflammation. This study is expected to be helpful in the development of flavonoids that have a clinical effect on suppressing BPH.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.9-17
• /
• 2023

Parkinson's disease is a complex neurodegenerative disease characterized by the progressive loss of dopamine-producing neurons in the substantia nigra, resulting in a variety of motor and non-motor symptoms. This study aimed to provide a comprehensive overview of Parkinson's disease, including classification of Parkinson's disease, impairment due to impairment, how disability is assessed, and how it is treated. Major symptoms of Parkinson's disease include tremors, stiffness, bradykinesia, and postural instability, and treatment methods include rehabilitation through drugs, surgical procedures, physical therapy, and occupational therapy. Early diagnosis, individualized treatment interventions, and comprehensive treatment involving a multidisciplinary medical team will be essential to manage Parkinson's disease and improve patients' quality of life. In conclusion, this study will provide comprehensive information on the complex nature of Parkinson's disease and serve as a useful guide for healthcare providers designing treatment plans for Parkinson's patients.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2648-2653
• /
• 2003

This paper describes the development of a 3-DOF laparoscopic assistant robot system with motor-controlled bending and zooming mechanisms using the voice command motion control and auto-tracking control. The system is designed with two major criteria: safety and adaptability. To satisfy the safety criteria we designed the robot with optimized range of motion. For adaptability, the robot is designed with compact size to minimize interference with the staffs in the operating room. The required external motions were replaced by the bending mechanism within the abdomen using flexible laparoscope. The zooming of the robot is achieved through in and out motion at the port where the laparoscope is inserted. The robot is attachable to the bedside using a conventional laparoscope holder with multiple DOF joints and is compact enough for hand-carry. The voice-controlled command input and auto-tracking control is expected to enhance the overall performance of the system while reducing the control load imposed on the surgeon during a laparoscopic surgery. The proposed system is expected to have sufficient safety features and an easy-to-use interface to enhance the overall performance of current laparoscopy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.470-472
• /
• 2017

Currently, various studies using chemotherapy, such as surgical treatment, radiation or optical therapy, and chemotherapy, are underway. In addition, expensive chemotherapeutic drugs and large-scale equipment have been developed to improve the accuracy and therapeutic effect. However many side effects caused by misuse of the kind of light source, radiation, and cancer treatment have been observed. Therefore, in this paper, we propose a novel chemotherapeutic method by developing a customized cancer cell proliferation inhibition module based on a microcontroller that is relatively inexpensive, easy to operate, and able to operate in various wavelength light sources.

• Journal of Technologic Dentistry
• /
• v.43 no.4
• /
• pp.202-209
• /
• 2021

By classifying temporary denture production for surgical guides, digital guide-based surgery, and final prosthesis production, the problems of each process were assessed in advance and the factors that could be improved were confirmed in this study. The manufacturing process of fusion dental prosthesis uses virtual programs and computed tomography images to manufacture devices using the latest technologies of computer-aided design/computer-aided manufacturing and three-dimensional printing, which enables implants to be placed in the desired location in advance. Moreover, implant placement is not dependent on the skill and condition of the dentist, and because it uses a computer system, it can always be performed at a constant and optimal position. This can reduce the remanufacturing rate compared with the general method, shorten the treatment period, and eliminate patient discomfort. Unlike the traditional method of using impression materials and plaster models, digital fusion dental prostheses would be evaluated as a technology for producing prosthesis through professional design technology and communication.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.363-365
• /
• 2015

The Asiatic black bear (Ursus thibetanus) is globally protected species and involved in a species restoration program by the Korea National Park Service. However, the bears could not be released into the wild were required regulation of population due to the limited space of breeding facility, so surgical castration was performed in two males. Bears were immobilized with a combination of 2 mg/kg tiletamine-zolazepam and $40{\mu}g/kg$ medetomidine, and general anesthesia was maintained with isoflurane via endotracheal tube intubation. Orchiectomy was carried out by the closed method using the LigaSure vessel sealing device through pre-scrotal incision. Subcutaneous tissues of the incision site were sutured by continuous pattern with absorbable suture material, and the skin incision was closed with tissue glue. The bears recovered uneventfully from general anesthesia after a duration of 58 min (bear A) and 53 min (bear B). Total surgical time was 26 min (bear A) and 24 min (bear B). No postoperative swelling or complications were observed. This is the first report that describes the use of the LigaSure for orchiectomy in the Asiatic black bear.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.382-382
• /
• 2012

Nanostructures have a larger surface/volume ratio as well as unique mechanical, physical, chemical properties compared to existing bulk materials. Materials for biomedical implants require a good biocompatibility to provide a rapid recovery following surgical procedure and a stabilization of the region where the implants have been inserted. The biocompatibility is evaluated by the degree of the interaction between the implant materials and the cells around the implants. Recent researches on this topic focus on utilizing the characteristics of the nanostructures to improve the biocompatibility. Several studies suggest that the degree of the interaction is varied by the relative size of the nanostructures and cells, and the morphology of the surface of the implant [1, 2]. In this paper, we fabricate the nanowires on the Ti substrate for better biocompatible implants and other biomedical applications such as artificial internal organ, tissue engineered biomaterials, or implantable nano-medical devices. Nanowires are fabricated with two methods: first, nanowire arrays are patterned on the surface using e-beam lithography. Then, the nanowires are further defined with deep reactive ion etching (RIE). The other method is self-assembly based on vapor-liquid-solid (VLS) mechanism using Sn as metal-catalyst. Sn nanoparticle solutions are used in various concentrations to fabricate the nanowires with different pitches. Fabricated nanowries are characterized using scanning electron microscopy (SEM), x-ray diffraction (XRD), and high resolution transmission electron microscopy (TEM). Tthe biocompatibility of the nanowires will further be investigated.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.3
• /
• pp.1081-1083
• /
• 2014

Malignancy-associated mortality, decreased productivity, and spiritual, social and physical burden in cancer patients and their families impose heavy costs on communities. Therefore cancer prevention, early detection, rapid diagnosis and timely treatment are very important. Use of modern methods based on information technology in cancer can improve patient survival and increase patient and health care provider satisfaction. Robot technology is used in different areas of health care and applications in surgery have emerged affecting the cancer treatment domain. Computerized and robotic devices can offer enhanced dexterity by tremor abolition, motion scaling, high quality 3D vision for surgeons and decreased blood loss, significant reduction in narcotic use, and reduced hospital stay for patients. However, there are many challenges like lack of surgical community support, large size, high costs and absence of tactile and haptic feedback. A comprehensive view to identify all factors in different aspects such as technical, legal and ethical items that prevent robotic surgery adoption is thus very necessary. Also evidence must be presented to surgeons to achieve appropriate support from physicians. The aim of this review article is to survey applications, opportunities and barriers to this advanced technology in patients and surgeons as an approach to improve cancer care.

• Journal of Veterinary Clinics
• /
• v.39 no.5
• /
• pp.246-252
• /
• 2022

Multilobular osteochondrosarcoma (MLO) reportedly has a good prognosis after complete resection. This study reports the successful treatment of MLO in two dogs using 3-dimensional (3D) printing technology. A nine-year-old castrated male Maltese (Case 1) and a five-year-old castrated male poodle (Case 2) both presented with a mass in the skull. Diagnostic imaging revealed a cranial mass arising from the cranio-orbital and parieto-occipital bones. The masses were resected using 3D-printed osteotomy guides, and the resulting defects were reconstructed using 3D-printed patient-specific implants. Histopathological results confirmed the resection of MLOs with clean margins. Patients routinely recover from surgery without complications. To date, the two patients remain alive without clinical signs of tumor recurrence at 20 and 12 months postoperatively, respectively. In the management of MLO in dogs, 3D printing technology can allow accurate tumor resection, reduced surgical time, and successful reconstruction of large defects.