• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.149-152
• /
• 2000

The effects of selected co-surfactants on diesel removal from sandy soil were studied to increase diesel recovery from the soil by the surfactant-enhanced remediation of diesel-contaminated soil. The capability of co-surfactant for enhancing removal efficiency can be related with the interaction between its structural character and the structural peculiarity of nonionic surfactant. In the case of Tween 80, hexanol showed the great improvement in diesel recovery. Efficiency of diesel recovery decreased as hydrocarbon chain length of cosurfactant decreased. Higher content of hexanol further increased diesel recovery, but there was no significant improvement in the case of butanol and pentanol.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.355-363
• /
• 2018

There are serious issues with the application of surfactant flooding as a third recovery method, such as surfactant slug losses. In this study,the impact of the salinity gradient on the remobilization of oiltrapped in Berea sandstone was investigated by emphasizing the surfactant adsorption gradient and phase behavior to determine the optimal salinity of the chosen surfactant concentration for investigating the salinity gradient. Three salinity-gradient schemes were applied to six cores saturated with light and heavy oils. The positive salinity gradient provided the best recovery results with an in situ microemulsion formation that could be observed in the fluid collector.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.660-669
• /
• 2018

Enhanced oil recovery (EOR) is a method used to improve the recovery factor of remaining hydrocarbon in reservoir. Polymer and surfactant EOR techniques have limitations depending on reservoir or production conditions (temperature, salinity, etc.) because the polymer and surfactant are highly affected by the reservoir conditions. In this study, analysis of the current improvements to chemical substances and application technologies was performed based on recent research data. Conventional polymer is readily degraded by the conditions of high temperature and high salinity. Therefore, new polymers and injection techniques have been developed to remediate such problems. In addition, surfactant applicable to shale and carbonate reservoirs is developed as petroleum recovery expands to unconventional reservoirs. However, these chemical substances are not widely used in the current oil fields due to high costs. Therefore, further studies must be conducted to reduce the cost and thus increase the effectiveness of EOR techniques.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.5
• /
• pp.1-7
• /
• 2016

The removal of non-aqueous phase liquids (NAPLs) from groundwater using pure water, via pump and treat, is quite ineffective due to their low solubility and hydrophobicity. Therefore, the objectives of pilot tests were to select potentially suitable surfactants that solubilize tetrachloroethylene (PCE) and trichloroethylene (TCE) present as contaminants and to evaluate the optimal range of process parameters that can increase the removal efficiency in surfactant-enhanced soil flushing (SESF). Used experimental method for surfactant selection was batch experiments. The surfactant solution parameters for SESF pilot tests were surfactant solution concentration, surfactant solution pH, and the flow rate of surfactant solution in the SESF pilot system. Based on the batch experiments for surfactant selection, DOSL (an anionic surfactant) was selected as a suitable surfactant that solubilizes PCE and TCE present as contaminants. The highest recovery (95%) of the contaminants was obtained using a DOSL surfactant in the batch experiments. The pilot test results revealed that the optimum conditions were achieved with a surfactant solution concentration of 4% (v/v), a surfactant solution pH of 7.5, and a flow rate of 30 L/min of surfactant solution (Lee and Woo, 2015). The maximum removal of contaminants (89%) was obtained when optimum conditions were simultaneously met in pilot-scale SESF operations. These results confirm the viability of SESF for treating PCE and TCE-contaminated groundwater.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.32-42
• /
• 2008

A surfactant recovery and reuse process by selective adsorption with activated carbon was proposed to reduce surfactant cost in a soil washing process. Mathematical model simulation was performed for the whole process, which consists of soil washing, soil recovery, and soil re-washing. The optimal range of surfactant dosage was $6{\sim}10$-fold critical micelle concentration in soil. The efficiency of surfactant reuse process was decreased with increasing the dosage of activated carbon. Effectiveness factor for activated carbon significantly altered the efficiency of the reuse process unlike effectiveness factor for soil. Total requirement of surfactant was reduced to 20-30% with the reuse process compared to the conventional soil washing process. The contamination of wastewater after soil washing was reduced with the reuse process. This mathematical model can be used to estimate performance of the whole process of soil washing including surfactant recovery and to obtain optimal ranges of operating conditions without extra labor-intensive experimental works.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.307-310
• /
• 2004

Micellar enhanced ultrafiltration (MEUF) is a surfactant-based separation process and it can remove heavy metal ions from aqueous stream effectively. However, it is necessary to recover and reuse surfactants for economic feasibility because surfactant is expensive. Foam fractionation was investigated for both anionic and cationic surfactant recovery. Chelating agent such as ethylenediaminetetraacetic acid (EDTA) was studied for the separation of heavy metals from surfactant solution. Anionic surfactants bound with heavy metals can be recovered by lowering pH (acidification). In this study, citric acid and imminodiacetic acid (IDA) were applied to release copper from sodium dodecyl sulfate (SDS) micellar solution and compared with EDTA. Precipitation of copper by ferricynide and sodium sulfide were also investigated. As a result, ca. 100 % of copper was released from SDS micellar solution by 5 mM of EDTA and citric acid. And 3.3 mM of ferricyanide formed precipitate with 82.7 % of copper. 5 mM of IDA and sodium sulfide released or formed precipitate 82.5 % and 58.9 % of copper, respectively. Citric acid is harmless to environments and ferricyanide precipitates with Cu easily. Therefore, it is considered that citric acid and ferricyanide have competiveness over a famous chelating agent, EDTA, for the separation of Cu from SDS solution.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.302-305
• /
• 2003

The purpose of this study was to assess the effect of surfactant on the rate of NAPLs(non-aqueous phase liquids) solubilization. The experimental variables were surfactant type, NAPLs type and water type. The main experimental designs were consists of two phases. The solubilization rate is sensitive to surfactant type based on this test. Used aqueous surfactants were solubilized and removed 72.77 to 89.90% of toluene, PCE(tetrachloroethylene) from the contaminated water during the test, respectively. T60 has higher and stable recovery ratio than SDS in surfactant type but, the micelle of the T60 is more weaker than that of SDS based on this study's results. And the solubilization rate in used water type was almost same.(deionized water, surface water).

• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.1
• /
• pp.203-208
• /
• 2013

Sericin is usually abandoned after the degumming process. However, it could be a valuable bioresource if an economically efficient recovery process could be set up. In this study, sericin was recovered directly from the degummed waste solution by adding calcium chloride, which induced the precipitation of the surfactant, sodium oleate, by charge interaction. The recovery yield was maximum when 10% of calcium chloride was added. Further increase in the calcium chloride concentration induced the precipitation of sericin. The recovered sericin had a molecular weight distribution similar to that of the hot-water-extracted sericin; but some highmolecular- weight sericin could not be recovered. The secondary structure and amino acid composition of the recovered sericin were similar to those of conventional hot-water-extracted sericin. We expect that sericin recovered from the degummed waste solution could be an alternative to the hot-water-extracted sericin, which is widely used in various applications.

• Economic and Environmental Geology
• /
• v.34 no.4
• /
• pp.417-422
• /
• 2001

Sutfactants may be used in remediation of subsoil and aquifer contaminated with hydrophobic compounds. The objectives of this study were to select potentially suitable sUlfactants that solubilize toluene present as a contaminant and to determine the effectiveness of toluene removal from Ottawa sand by the selected surfactants. Material used as the model soil was Ottawa sand and the organic used as model contaminant was toluene. Used experimental methods were separatory funnel experiment and shaker table agitation/centrifugation experiments. Based on the experimental results, the following conclusions were drawn; t) In the surfactant selection, six different surfactants were chosen based on surfactant types, toxicity, and water solubility. These six were focused into two on the basis of HLB and surface tension study, separatory funnel experiment, shaker table and centrifugation experiments. The two most suitable surfactants were Sandopan JA36 (an anionic surfactant), and Pluronic L44 (a non-ionic surfactant). 2) In the shaker table agitation and centrifugation experiments, the highest recovery of the toluene was 96% which was obtained with one surfactant wash plus two water rinses using an anionic surfactant (Sandopan JA36).

• Clean Technology
• /
• v.19 no.4
• /
• pp.481-486
• /
• 2013

Alkali-surfactant-polymer (ASP) solution was manufactured by using the domestic surfactants for enhanced oil recovery. Domestic surfactants such as linear alkylbenzene sulfonic acid (LAS) and dioctyl sulfosiuccinate (DOSS) were used. This surfactants were purchased from AK chemtech Co., Ltd. (Korea). LAS and DOSS were blended and the ratio of LAS to DOSS are 1:1 and 2:1. Decane was used as a model compound of the crude oil. Surfactant solution and decane were blended to analyze microemulsion. Brine-oil-surfactant are mixed at varying concentration of brine from 0.8 to 3.6 wt.%. Increasing salinity causes the phase transition of microemulsion from water to middle to oil. Also, by measuring the surface tension and interfacial tension using pendent drop tensiometer and Huh's equation optimal ratio of the ASP solution was determined.