• 한국의류산업학회지
• /
• 제22권2호
• /
• pp.222-232
• /
• 2020

This study analyzes changes in the knees, hips, and hip joint length according to the different angles of bending knees by 45°, 90°, and 135° respectively for knees, hips, and the hip joint that have high fracture rates when falling down. The research subjects were 10 elderly women in their 60s (or older) that obtain data collected through direct measurement. For analysis, the study drew a diagram of elongation and shrinkage based on changes and change rate from a straight posture (0°) and conducted a statistical analysis on differences of body surface length by zone according to movements. The more the knees were bent, the vertical surface length in front of the knees, the horizontal surface length above the knee line, the horizontal body surface length below the knee lines on the back, and the vertical surface lengths between front side lines and the side lines increased; however, the vertical surface length on the back decreased. For the hip joint, the difference in the vertical surface length was more distinctive when compared to the horizontal. Finally, the horizontal surface length increased below the hips and the vertical surface length increased in most areas except the sidelines and the front. The result of the change in body surface length according to the movements of this study can be utilized in the development of the motion-variable protector.

• 한국지반환경공학회 논문집
• /
• 제13권12호
• /
• pp.81-89
• /
• 2012

도심지 내에서 교통량 증가로 인하여 차선확대가 요구되는 경우, 기존 터널은 증가된 차선만큼 단면을 확대할 필요가 있다. 터널 단면확대 공사로 발생되는 터널주변의 교통정체를 해소하기 위하여 터널 내에 직사각형 단면의 프로텍터를 설치하여 프로텍터 내부로 교통흐름을 유지하기도 한다. 프로텍터를 사용하면 터널 측벽 하부에서 프로텍터와 굴착 면 사이의 공간이 협소하여 록볼트 시공이 불가능할 수도 있다. 본 연구에서는 터널 측벽 하부의 협소한 공간에서 록볼트를 시공하지 않고 숏크리트 두께를 증가시켜 터널의 안정성을 확보하는 방법을 제안하였다. 기존 2차선 재래식 터널을 3차선 및 4차선 NATM터널로 확대 시공할 경우에 대하여 수치해석을 수행하였다. 터널 측벽 하부에 록볼트를 시공한 경우, 록볼트를 시공하지 않은 경우 및 록볼트를 시공하지 않고 숏크리트 두께만 증가시킨 경우에 대하여 터널의 천단변위, 내공변위 및 숏크리트에 발생한 응력을 비교분석하였다. 천단변위 및 상반 내공변위는 차이가 거의 없었으며, 하반 내공변위는 터널 측벽 하부에 록볼트를 시공하지 않은 경우가 록볼트를 시공한 경우보다 최대 1.3mm 크게 발생하였다. 또한 숏크리트에 발생한 휨압축응력은 터널 측벽 하부에 록볼트를 시공하지 않은 경우가 록볼트를 시공한 경우보다 최대 1.3MPa 크게 발생하였다. 록볼트 미시공에 의해 추가 발생된 숏트리트 응력을 감소시키기 위하여 기존 숏트리크 두께의 20%(250mm ${\rightarrow}$ 300mm, 4차선 터널)및 25%(200mm ${\rightarrow}$ 250mm, 3차선 터널)를 추가 시공하면 록볼트를 시공할 경우와 비슷한 응력수준을 나타내는 것으로 분석되었다.

• 한국터널지하공간학회 논문집
• /
• 제14권6호
• /
• pp.637-652
• /
• 2012

도심지내 기존터널을 단면확대 시공하는 경우, 터널내 교통흐름을 유지하기 위하여 '${\sqcap}$'형태의 프로텍터를 설치한다. 터널내 프로텍터를 설치하면 터널 측벽하부에서 작업공간이 협소하여 록볼트 시공이 불가능해 질 수가 있다. 본 연구는 터널의 측벽하부에서 록볼트를 시공하지 않고 숏크리트만으로 보강하여 터널단면을 확대된 할 경우, 터널구조물의 안정성과 보강되는 최적의 숏크리트 두께를 제시하는데 목적이 있다. 본 연구를 위하여 3차선 NATM 도로터널을 4차선 NATM 도로터널로 확대 시공하는 경우에 대하여 수치해석을 수행하였다. 수치해석결과, 4차선 NATM 도로터널의 측벽하부에서 록볼트를 시공하지 않은 경우의 천단변위와 상반 내공변위는 록볼트를 시공한 경우와 거의 유사하였다. 다만, 하반 내공변위 및 숏크리트 응력은 록볼트를 시공하지 않은 경우가 록볼트를 시공한 경우보다 최대 0.57 mm 및 최대 1,300 kN/$m^2$ 크게 나타났다. 터널 측벽하부에서 록볼트를 시공하지 않아 추가 발생한 하반 내공변위와 숏트리트 응력은 25 cm인 기본 숏크리트 두께의 20%(25 cm${\rightarrow}$30 cm)만 증가시켜도 저감시킬 수 있다.

• Design & Manufacturing
• /
• 제2권5호
• /
• pp.1-4
• /
• 2008

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LCP (Light Guide Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50-200{\mu}m$ in diameter on it by erosion method. But the surface of the erosion dots of LGP is very rough due to the characteristics of the erosion process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. Especially, the negative and positive micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP.

• 대한치과재료학회지
• /
• 제43권1호
• /
• pp.81-89
• /
• 2016

The purpose of this study was to evaluate the effect of the experimental and commercial fluoride varnishes on the Vickers hardness of bovine teeth. The experimental fluoride varnishes with 5 wt.% NaF were fabricated using Bis-GMA or rosin as the resin base. The components were mixed with over-head stirrer under warming up in a double boiler for 30 minutes. Four commercial fluoride varnishes (V-varnish, Flor-opal, Cavity shield, Fluor protector) were compared with the experimental fluoride varnishes. Vickers hardness was measured on the labial surface of bovine anterior teeth after applying fluoride varnish on 5th and 30th day. The surface of bovine teeth was observed with a scanning electron microscope before and after applying fluoride varnish and the change of the components on the bovine teeth surface was measured with EDX. In terms of hardness, the experimental rosin-based fluoride varnish showed significantly higher hardness on the 5th and 30th day than the control (bovine teeth without fluoride treatment)(p<0.05). EDX results showed that the fluoride content on the surface of bovine teeth treated with the experimental rosin-based fluoride varnish was highest on the 1st and 10th day. The higher hardness and fluoride content of experimental rosin-based fluoride varnish can be considered to be used as an effective fluoride varnish to prevent dental caries.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.21-25
• /
• 2013

The purpose of this study is to provide basic data for the safety assessment of a water purifier when water leaks due to inappropriate maintenance and the examination of the cause of accidents related to the leak. Due to its inspection and management by non-specialists, if a leak occurs in a water purifier with the water level controller being inclined, it may result in the failure of the compressor, power supply line, PCB, etc. The analysis of the thermal diffusion pattern of water purifier compressors using a thermal image camera shows that its maximum temperature was approximately $80^{\circ}C$. In addition, its operating current was a maximum of 13 A and the system's operating current was approximately 1.7 A after the compressor was charged. It was found that the housing type power cable cover of the compressor had the effect of preventing electric shock but has poor flame resistance. Furthermore, the performance of the overload protector, PTC relays, etc., was excellent but they have potential for problems as metallic terminals were exposed, resulting in the potential of a safety related accident. The terminals and their surface damaged by the tracking showed a trace of carbonization and the resistance between terminals was measured to be approximately $8{\Omega}$. In addition, while the tracking was proceeding, the fuse and circuit breaker installed for system protection did not operate.

• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.42-50
• /
• 2005

Silk fabrics are widely used as high quality cloth, interior, quilting and bedding materials because of having excellent touch, drape, resilience and low specific gravity characteristics. But, many waste silk materials are produced during the reeling, spinning, weaving, dyeing and finishing processes. From this fact, the recycle of waste silks is interested in studying for the application of industrial textile materials such as filter, oil absorbent and wound protector. Thus, this research has surveyed the decolorizing and carding characteristics in order to recycle the colored waste silk materials. As the results, the carding condition of waste silk fabrics was optimized with different fiber lengths and curding passage. In addition, the fiber failure mechanism from the wasted silk microdamage caused by carding process was investigated. Also it was found that longitudinal and transverse cracks, abrasion and pilling were formed on the surface of wasted silk fibers.

• 영어영문학
• /
• 제64권2호
• /
• pp.239-252
• /
• 2018

Many critics on William Faulkner's As I Lay Dying have read Addie Bundren as the disrupter of patriarchal power. By raising a question about the usefulness of language, which is the symbolic power of patriarchy and having an affair with the preacher Whitfield outside her wedlock, Addie directly challenges patriarchal power. From a quite different vantage point, however, we can read Addie as the faithful protector of the norm of whiteness in the South in light of the social hierarchy. As a former school teacher, Addie is from middle class before her marriage. By her marriage to Anse, who is a lower-class white, Addie has class anxiety that her social status in the stratum of whiteness could be degraded from a middle to a lower-class white, "white trash," which means that she is not white enough to be considered as the normative whiteness. Especially, Addie's anxiety increases due to the fact that her lazy husband is reluctant to work and relies on her neighbors, causing her family to be entrapped at the bottom in the stratum of whiteness. Therefore, she decides to take revenge on her husband after giving birth to her second child Darl by asking Anse to bury her dead body in her familial burial site in Jefferson. By rendering her family to suffer the hardship during her funeral procession, not only does she succeed in taking revenge on Anse on the surface, she regains her social status as a middle-class white by being buried in Jefferson fundamentally.

• Corrosion Science and Technology
• /
• 제21권2호
• /
• pp.111-120
• /
• 2022

To solve the corrosion problem of industrial equipment and other constructions containing metals, corrosion protection can be performed by using coating which provides a barrier between the metal and its environment. Coatings play a significant role in protecting irons and steels in harsh marine and acid environments. This study was conducted to identify an anti-corrosive epoxy coating for carbon steel composite with 0.1, 0.3, and 0.5 wt% concentrations of nanoparticles of SiO₂ using the dip-coating method. The electrochemical behavior was analyzed with open circuit potential (OCP) technics and polarization curves (Tafle) in 3.5 wt% NaCl and 5 vol% H₂SO₄ media. The structure, composition, and morphology were characterized using different analytical techniques such as X-ray Diffraction (XRD), Fourier Transform Infrared spectrum (FT-IR), and Scanning Electron Microscopy (SEM). Results revealed that epoxynano SiO₂ coating demonstrated a lower corrosion rate of 2.51 × 10^-4 mm/year and the efficiency of corrosion protection was as high as 99.77%. The electrochemical measurement showed that the nano-SiO₂ / epoxy coating enhanced the anti-corrosive performance in both NaCl and H₂SO₄ media.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.239-242
• /
• 2006

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LGP (Light Guiding Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50{\sim}200$ um in diameter on it by etching process. But the surface of the etched dots of LGP is very rough due to the characteristics of the etching process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with 50um micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different aspect ratio (i.e. $0.2{\sim}0.5$) of optical pattern conditions to the brightness distribution of BLU with micro-lens patterned LGP. Finally, high aspect ratio micro-lens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.