• 한국환경과학회지
• /
• 제16권10호
• /
• pp.1127-1137
• /
• 2007

We focused on effects on data assimilation of simulated wind fields by using upper-air observations (wind profiler and sonde data). Local Analysis Prediction System (LAPS), a type of data assimilation system, was used for wind field modeling. Five cases of simulation experiments for sensitivity analysis were performed: which are EXP0) non data assimilation, EXP1) surface data, EXP2) surface data and sonde data, EXP3) surface data and wind profiler data, EXP4) surface data, sonde data and wind profiler data. These were compared with observation data. The result showed that the effects of data assimilation with wind profiler data were found to be greater than sonde data. The delicate wind fields in complex coastal area were simulated well in EXP3. EXP3 and EXP4 using wind profiler data with vertically high resolution represented well sophisticated differences of wind speed compared with EXP1 and EXP2, this is because the effects of wind profiler data assimilation were sensitively adjusted to first guess field than those of sonde observations.

• 한국기계가공학회지
• /
• 제7권1호
• /
• pp.47-52
• /
• 2008

We present a 3-D profiler specially devised for the profile measurement of rough surfaces that are difficult to be measured with conventional non-contact interferometer. The profiler comprises multiple two-point-diffraction sources made of single-mode optical fibers. Test measurement proves that the proposed profiler is well suited for the warpage inspection of microelectronics components with rough surface, such as unpolished backsides of silicon wafers and plastic molds of integrated-circuit chip package.

• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.81-86
• /
• 2008

I present a 3-D profiler specially devised for the profile measurement of specular surfaces that requires precision shape accuracy up to a few nanometer. A profile is reconstructed from the curvature of a test part of the surface at several locations along a line. The local curvature data are acquired with White-light Scanning Interferometry. Test measurement proves that the proposed profiler is well suited for the specular surface inspection like precision mirror.

• 한국전자파학회논문지
• /
• 제24권1호
• /
• pp.91-97
• /
• 2013

지표면의 후방 산란 계수를 계산하는 지표면 산란 모델의 입력 변수로는 크게 수분함유량과 지표면 거칠기가 있고, 산란 계수 계산에 있어 지표면 거칠기의 영향이 수분함유량의 영향보다 크다. 본 연구에서는 지표면 거칠기의 정확한 측정 방법을 제기하고, 측정 오차를 분석한다. 이를 위하여 대표적인 지표면 거칠기 측정 장치인 pin-board profiler(1 m, 0.5 cm 간격)와 laser profiler(1 m, 0.25 cm 간격)를 이용하여 실제 지표면을 측정하였다. 두 측정 장치의 평균 차이는 유효 높이(RMS height)가 0.097 cm, 상관 길이(correlation length)가 1.828 cm이었다. 그리고 상관 함수, 상대오차를 분석한 결과, laser-profiler의 반복 측정에 대한 장치의 안전성이 더 좋았다. 두 측정 장치의 차이가 후방 산란 계수에 미치는 영향을 분석하기 위해 지표면 산란 모델을 이용하여 비교한 결과, 입사각 $20{\sim}60^{\circ}$에서 1 dB 이하의 차이를 보였다.

• Asian Journal of Atmospheric Environment
• /
• 제4권3호
• /
• pp.198-210
• /
• 2010

Precise analysis of local winds for the prediction of atmospheric phenomena in the planetary boundary layer is extremely important. In this study, wind profiler data with fine time resolution and density in the lower troposphere were used to improve the performance of a numerical atmospheric model of a complex coastal area. Three-dimensional variational data assimilation (3DVAR) was used to assimilate profiler data. Two experiments were conducted to determine the effects of the profiler data on model results. First, we performed an observing system experiment. Second, we implemented a sensitivity test of data assimilation intervals to extend the advantages of the profiler to data assimilation. The lowest errors were observed when using both radio sonde and profiler data to interpret vertical and surface observation data. The sensitivity to the assimilation interval differed according to the synoptic conditions when the focus was on the surface results. The sensitivity to the weak synoptic effect was much larger than to the strong synoptic effect. The hourly-assimilated case showed the lowest root mean square error (RMSE, 1.62 m/s) and highest index of agreement (IOA, 0.82) under weak synoptic conditions, whereas the statistics in the 1, 3, and 6 hourly-assimilated cases were similar under strong synoptic conditions. This indicates that the profiler data better represent complex local circulation in the model with high time and vertical resolution, particularly when the synoptic effect is weak.

• 한국분말재료학회지
• /
• 제18권5호
• /
• pp.406-410
• /
• 2011

Green strength is an important property of powders since high green strength guarantees easy and safe handling before sintering. The green strength of a powder compact is related to mainly mechanical and surface characters, governed by interlocking of the particles. In this study, the effect of powder surface roughness on the green strength of iron powders was investigated using a transverse rupture test. Three-dimensional laser profiler was employed for quantitative analyses of the surface roughness. Two different surface conditions, i.e. surface roughness, of powders were compared. The powders having rough surfaces show higher green strength than the round surface powders since higher roughness leads increasing interlocked area between the contacting powders.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.325-327
• /
• 2004

Novel surface profiler system for inspection of the display components is demonstrated In the case of the liquid crystal display, for example, not only the flatness of the alignment film but also the quality of rubbing can be inspected. Furthermore, the shape of the component such as the color filter, electrode and mirror can be inspected without removing each component.

• Tribology and Lubricants
• /
• 제40권2호
• /
• pp.47-53
• /
• 2024

Surface topography plays a decisive role in determining the performance of several precision components. In particular, the surface roughness of semiconductor devices affects the precision of the circuit. In this regard, the surface topography of a given surface needs to be appropriately assessed. Typically, the average roughness is used as one of the main indicators of surface finish quality because it is influenced by both dynamic and static parameters. Owing to the increasing demand for such accurate and reliable surface measurement systems, studies are continuously being conducted to understand the parameters of surface roughness and measure the average roughness with high reliability. However, the differences in the measurement methods of surface roughness are not clearly understood. Hence, in this study, the surface roughness of the back of a silicon wafer was measured using both contact and noncontact methods. Subsequently, a comparative analysis was conducted according to various surface roughness parameters to identify the differences in surface roughness depending on the measurement method. When using a 3D laser confocal microscope, even smaller surface asperities can be measured compared with the use of a 3D profiler. The results are expected to improve the understanding of the surface roughness characteristics of precision components and be used as a useful guideline for selecting the measurement method for surface topography assessment.

• 한국환경과학회지
• /
• 제19권8호
• /
• pp.983-999
• /
• 2010

Wind power energy is one of the favorable and fast growing renewable energies. It is most important for exact analysis of wind to evaluate and forecast the wind power energy. The purpose of this study is to improve the performance of numerical atmospheric model by data assimilation over a complex coastal area. The benefit of the profiler is its high temporal resolution and dense observation data at the lower troposphere. Three wind profiler sites used in this study are inhomogeneously situated near south-western coastal area of Korean Peninsula. The method of the data assimilation for using the profiler to the model simulation is the three-dimensional variational data assimilation (3DVAR). The experiment of two cases, with/without assimilation, were conducted for how to effect on model results with wind profiler data. It was found that the assimilated case shows the more reasonable results than the other case compared with vertical observation and surface Automatic Weather Station(AWS) data. Although the effect of sonde data was better than profiler at a higher altitude, the profiler data improves the model performance at lower atmosphere. Comparison with the results of 4 June and 5 June suggests that the efficiency with hourly assimilated profiler data is strongly influenced by synoptic conditions. The reduction rate of Normalized Mean Error(NME), mean bias normalized by averaged wind speed of observation, on 4 June was 28% which was larger than 13% of 5 June. In order to examine the difference in wind power energy, the wind power density(WPD) was calculated and compared.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.76-92
• /
• 2016

산업이 고도화될수록 높은 품질과 보다 정밀하게 가공된 제품의 안정된 생산이 요구되고 있으며, 그에 대한 표준화된 측정법 및 관리법이 요구되고 있다. 산업체에서 생산되는 다양한 형태의 제품들 중, 마이크로메타 또는 나노메타 수준의 정밀한 가공 및 측정에 있어서, 정확하고 일관성 있게 빠른 시간 안에 제품분석을 수행 할 수 있는 방법은 오래 전부터 활발히 연구되고 있으며, 그 중 광학 기반의 3D-profiler 는 빠른 속도와 간편한 사용으로 많은 인기를 얻고 있다. 이러한 분석법은 광학 현미경의 평면 분해능을 가지고, 나노크기의 물체 높이를 판별하여, 측정된 정보를 3차원 이미지로 형태를 재 구성할 수 있어, 미세한 표면 조도 변화나 나노 수준의 패턴 단차에 대한 정보를 간단하게 얻을 수 있다. 또한 빛의 간섭현상에 기초하여 시료 표면에 대한 정보를 얻기 때문에 원자단위 이하 수준의 측정 해상도를 가지게 된다. 표면의 칼라패턴에 대해서도 2D 평면 정보를 기초로, 다양한 색상의 패턴들에 대해 각각의 색에 따른 정확한 높이 분석 및 그 패턴 분리, 색깔과 매칭되는 3D 이미지 구현 등과 같은 분석이 가능하여, 이를 활용하여 다양한 분야에서 활발히 사용되고 있다. 실제 현장에서 측정된 다양한 3D 이미지를 소개하며, 이를 통해 광학 3D-Profiler에 대한 전반적인 성능 소개와 그 이해를 돕고자 한다.