• 품질경영학회지
• /
• 제27권1호
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• 대한수학회지
• /
• 제60권1호
• /
• pp.71-90
• /
• 2023

We construct generalized Cauchy-Riemann equations of the first order for a pair of two ℝ-valued functions to deform a minimal graph in ℝ³ to the one parameter family of the two dimensional minimal graphs in ℝ⁴. We construct the two parameter family of minimal graphs in ℝ⁴, which include catenoids, helicoids, planes in ℝ³, and complex logarithmic graphs in ℂ². We present higher codimensional generalizations of Scherk's periodic minimal surfaces.

• 한국지반공학회논문집
• /
• 제15권3호
• /
• pp.131-149
• /
• 1999

여러 연구들을 통하여 표면 거칠음 정도가 접촉면 전단력에 매우 중요함이 밝혀졌으며, 따라서 그 역할을 충분히 이해하기 위해서는 표면 거칠음 정도가 정확히 정량화 되어야 한다. 이 연구에서는 표면 형상을 정량화하기 위하여 일반적으로 사용되는 표면 거칠기 매개변수와 측정방법에 대하여 여러 참고문헌들을 검토하였다. 이것을 바탕으로 Normalized Roughness Parameter, $R_n$ (Uesugi and Kishida, 1986), Profile Roughness Parameter, $R_L$, 그리고 Surface Roughness Parameter, $R_n$(Dove and Frost, 1996)가 적합한 표면 거칠기 매개변수로 선택되었으며, 디지털 이미지 분석 시스템을 이용한 Optical Profile Microscopy(OPM) 방법을 표면 거칠음 측정방법으로 선택하였다 이 실험장비를 이용하여 일반적으로 사용되는 지오멤브레인의 표면과 표면 패턴을 대표하는, 표면이 매끄러운 것과 3가지 종류의 돌기형 HDPE 지오멤브레인을 사용하여, 전단 시험에 사용되지 않았던 지오멤브레인과 전단시험후의 지오멤브레인에 대한 표면 거칠음 정도의 정량화 작업을 수행하였다. 그 결과, $R_L과\; R_S$값은 이 연구에 사용된 지오멤브레인의 거칠음 정도를 충분한 측정범위로 표현할 수 있는 매개변수로 밝혀졌으나, $R_n$값은 충분히 표면 거칠음 정도의 차이를 표현하기에는 부족하게 매우 좁은 변화 범위를 나타내었다. 이 연구는 접촉면에서 표면 거칠음 정도가 접촉면 전단력에 미치는 영향을 조사하고자 우선적으로 표면 거칠음 정도의 정량화 작업을 연구한 것이다.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1211-1222
• /
• 2017

In order to decrease the parameter sensitivity of deadbeat direct torque control (DB-DTC), an improved deadbeat direct torque control method for surface mounted permanent-magnet synchronous motor (SPMSM) drives is proposed. First, the track errors of the stator flux and torque that are caused by model parameter mismatch are analyzed. Then a sliding mode observer is designed, which is able to predict the d-q axis currents of the next control period for one-step delay compensation, and to simultaneously estimate the model parameter disturbance. The estimated disturbance of this observer is used to estimate the stator resistance offline. Then the estimated resistance is required to update the designed sliding-mode observer, which can be used to estimate the inductance and permanent-magnetic flux linkage online. In addition, the flux and torque estimation of the next control period, which is unaffected by the model parameter disturbance, is achieved by using predictive d-q axis currents and estimated parameters. Hence, a low parameter sensitivity DB-DTC method is developed. Simulation and experimental results show the validity of the proposed direct control method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.464-468
• /
• 1996

To evaluate the surface integrity of machined products such as die, the surface roughness measurement is being much used. Especially, for machining automation and promotion of productivity, the surface roughness measurement technique changes from sepatate measuring system after machining process to the on-the-machine measurement. This study is on the surface roughness measurement by using scattered lights for on-the-machine measurement. This system is designed with a simple optical construction. And experiments are implemented with standard roughness specimen to obtain the parameters which are specularly reflected region parameter and diffusely reflected region parameter. To determine the surface roughness quickly, neural network is used. And this system gives the possibility to apply to the various production processes.

• 한국항공운항학회지
• /
• 제19권2호
• /
• pp.16-22
• /
• 2011

It is recognized that the control surface fault is detected by monitoring the value of the coefficients due to the control surface deviation. It is found out the control surface stuck position by comparing the trim value with the reference value. To detect and isolate the fault, two mixed methods apply to the real-time parameter estimation and similarity measure. If the scatter of aerodynamic coefficients for the fault and normal are closing nearly, fault decision is difficult. Applying similarity measure to decide for fault or not, it makes a clear and easy distinction between fault and normal. Low power processor is applied to the real-time parameter estimator and computation of similarity measure.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권3호
• /
• pp.265-269
• /
• 1996

We have studied the effect of the mesogenic core of nematic liquid crystals (NLCs) for polar (out-of-plane tilt) anchoring strength and surface order parameter on rubbed polyimide (PI) surfaces. The order of polar anchoring strength for NLCs on rubbed PI surfaces is 5CB > PCH5 > CCH5. From the above results, we suggest that the polar anchoring strength depends on the polarizability of the NLCs. The surface order parameter for NLCs is 5CB > PCH5 > CCH5 on rubbed PI surfaces. We conclude that the polar anchoring strength is strongly related to the surface order parameter on rubbed PI surfaces.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.265-268
• /
• 1995

We have studied the effect of the mesogenic core of nematic liquid crystals (NLCs) for polar (out-of-plane tilt) anchoring strength and surface order parameter on rubbed polyimide (PI) films. The order of polar anchoring strength for NLCs on rubbed PI films is 5CB > PCH5 > CCH5. This order is the same for all rubbing strengths investigated. The surface order parameter for NLCs is 5CB > PCH-5 > CCH5 on rubbed PI films. From these results, we suggest that the polar anchoring strength is strongly related to the surface order parameter.

• 한국CDE학회논문집
• /
• 제14권1호
• /
• pp.10-17
• /
• 2009

Surface detection and parameter estimation in point cloud is a relevant subject in CAD/CAM, reverse engineering, computer vision, coordinate metrology and digital factory. In this paper we present a software for a fully automatic surface detection and parameter estimation in unordered, incomplete and error-contaminated point cloud with a large number of data points. The software consists of three algorithmic modules each for object identification, point segmentation, and model fitting, which work interactively. Our newly developed algorithms for orthogonal distance fitting(ODF) play a fundamental role in each of the three modules. The ODF algorithms estimate the model parameters by minimizing the square sum of the shortest distances between the model feature and the measurement points. We demonstrate the performance of the software on a variety of point clouds generated by laser radar, computer tomography, and stripe-projection method.

• 한국공간구조학회논문집
• /
• 제17권3호
• /
• pp.75-82
• /
• 2017

The Kingery-Bulmash equation is the most common equation to calculate blast load. However, the Kingery-Bulmash equation is complicated. In this paper, a modified equation for surface blast load is proposed. The equation is based on Kingery-Bulmash equation. The proposed equation requires a brief calculation process, and the number of coefficients is reduced under 5. As a result, each parameter obtained by using the modified equation has less than 1% of error range comparing with the result by using Kingery-Bulmash equation. The modified equation may replace the original equation with brief process to calculate.