• Journal of Korean Society for Atmospheric Environment
• /
• 제24권E2호
• /
• pp.74-82
• /
• 2008

We have examined seasonal and annual means of clear-sky solar noon and daily erythemal ultraviolet-B irradiances measured in Anmyeon. The intensity of the EUV-B irradiance is mainly dependent on solar zenith angle (SZA) and total ozone amounts on clear day conditions. The daily maximum occurs near solar noon time and the highest monthly accumulated EUV-B is seen in July in Anmyeon. The maximum daily variation occurs in June and July due to precipitation and clouds. The 7-year trend of EUV-B irradiance shows that it is slightly increasing. Additionally, we could confirm that aerosol effects such as Asian Dust decreases the EUV-B irradiance reaching the ground surface by 35% to 60%. For more than 45% of the summer days, EUV-B irradiacne was high enough that the UV index registered higher than category Extremely High. This information will be very important for evaluation of the UV index for prevention of both skin cancer and ecosystem damages as well as to understand UV climatology over the Korean Peninsula.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.887-893
• /
• 1999

선박 내 공기정화나 음료수 살균용으로 제작된 세라믹 방전판 상하면에 패턴된 전극간에 일어나는 연면 코로나 방전을 이용한 오존발생기 구동장치의 주파수제어 특성에 대하여 분석하였다. 고압변압기의 2차측 권선 자체의 인덕턴스와 세라믹 방전판 전극 자체의 용량간의 공진도를 주파수제어를 통하여 제어하여 최고 5배의 전류제어범위를 실현하였다. 기존의 전압제어 및 단속제어방식에 비하여 주파수제어 방식은 28 mg/W의 오존발생 효율과 40% 의 입력전압 변동에 대하여 3.4 % 이내의 방전전류 안정도를 갖는 것으로 측정되었다.

• 한국환경과학회지
• /
• 제23권12호
• /
• pp.2089-2099
• /
• 2014

Emissions from aircraft have impacts on the air pollution of airport and the surrounding area. There are methods of emissions calculated as Tier 1, Tier2, Tier 3A and Tier 3B. Thus, this study investigated emissions from aircraft at the Gimhae International Airport using EDMS(Emissions & Dispersion Modeling System) program. Results of estimation from aviation emissions, Tier 3B considering all parts which can occur at the airport has the largest amount emissions. In order to understand the relation between aviation emissions and distribution of ozone concentration over airport area, numerical evaluation were carried out. Although the difference of surface ozone distribution between numerical assessment with and without aviation emissions was little, effects of air pollution at airport area from aviation emissions of NOx and VOCs.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.17-22
• /
• 1999

In this paper a new discharge type ozonizer comprising the superpose operation of silent and surface discharge is presented. The ozonizer consists of two concentric glass tubes with three type of discharge electrodes : the external electrode(EE), the internal electrode(IE) and the central electrode(CE). By varying the structure of IE and materials of CE, we analyzed the characteristics of ozone related different parameters including $O_{3con}$, $O_{3g}$, and $O_{3Y}$. Using Cu made CE it was found the O3con is higher with Cu tape than that with Cu coil wound IE. At Q = 1[l/ min] the values of O3con were found as 3000[ppm] with Cu tape wound IE and 1898[ppm] with Cu coil wound IE. Then using SUS wire made CE with Cu tape wound IE at Q = 1[ι/ min] the maximum value of O3con was found as 5632[ppm]. It was observed that both $O_{3con}$ and $O_{3y}$ are higher with SUS made CE than that with Cu made CE. The maximum values of $O_{3Y}$ were found as 79[g/kWh] with Cu made CE and 170[g/kWh] with SUS wire made CE.

• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.791-804
• /
• 2011

Numerical simulations were carried out to investigate the impact of PBL (Planetary boundary layer) scheme implemented in WRF on the result of meteorological fields and CMAQ modeling. 25-day period, representing high ozone concentration, was selected for the simulations. The three WRF domains covered East Asia region, Korean Peninsula and Seoul metropolitan area. The sensitivity of WRF-CMAQ modeling to the various PBL schemes was assessed and quantified by comparing model output and against observation from the meteorological and the air quality monitoring network within the domain. The meteorological variables evaluated included temperature, wind speed and direction over surface sites and upper air sounding sites. The CMAQ variables included gaseous species $O_3$ and $NO_x$ over monitoring stations. Although difference of PBL schemes implemented in WRF, they did not appreciably affect the WRF and CMAQ performance. There are partially differences between non-local and local mixing scheme, but are not distinct differences for the results of weather and air quality. It is suggested that impact of parameterization of vertical eddy diffusivity scheme in CMAQ also need to be researched in the future study.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.835-839
• /
• 2011

토치형 상압 플라즈마 반응기를 통한 방전 및 플라즈마 flame에 대한 분석과 발생된 플라즈마 현상을 이용하여 E. coli에 대한 살균효과를 측정하였다. 상압 플라즈마 반응기를 통해 나오는 플라즈마 flame의 길이는 입력전압, 반응기의 유량 그리고 아르곤/산소 혼합기체에서의 산소비율에 영향을 크게 받았다. 플라즈마 flame에 의한 가열효과는 10분 조사 후에도 $43^{\circ}C$ 미만으로 저온처리가 가능했다. E. coli에 대한 살균처리에서 입력전압의 증가, 아르곤/산소 혼합기체에서의 산소비율 증가 그리고 플라즈마 flame에 대한 노출시간의 증가에 따라 전체적인 살균효과를 향상되었다. 플라즈마 처리 시에 오존농도가 높은 공정조건에서 플라즈마 flame의 직접적인 접촉시간을 증가시키면 살균효과를 극대화할 수 있다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.278-280
• /
• 2006

A hybrid discharge type ozonizer, which is superposed silent and surface discharges, has been designed and manufactured to apply for Nitrogen Oxides(NO) gas removal. The ozonizer consists of three electrodes, and is classified three types of ozonizer by changing applied voltage. Investigation was carried out variance with the flow rate of supplied oxygen gas, discharge power and the sorts of superposed discharge type ozonizer. Moreover, $NO(1200[ppm])/N_2$ gas removal investigation was also conducted to apply for environment improvement field. Two kinds of NO gas removal investigations were conducted. It distinguishes the investigations into NO gas reaction method. According to these studies, maximum removal rate of 100[%] in NO gas was obtained, and 8334[ppm] and 3249[mg/h] of maximum ozone concentration and generation were also obtained respectively.

• 실내환경 및 냄새 학회지
• /
• 제17권4호
• /
• pp.396-403
• /
• 2018

In this study, volatile organic compounds (VOCs) emitted from printing industries were analyzed, and an inorganic adsorbent, ${\gamma}-alumina$, was selected for the effective control of the VOC emissions. Printing processes commonly require inks, thinners, and cleaners, and they were mixed organic solvents containing aromatic compounds, ketones, and alcohols. Therefore, toluene, methyl ethyl ketone (MEK), and isopropyl alcohol (IPA) were selected as model compounds for this study. The adsorptive properties using ${\gamma}-alumina$ were determined for the model compounds. Both batch isotherm and continuous flow column tests demonstrated that the adsorption capacity of MEK and IPA was 3~4 times higher than that of toluene. The column test performed at an inlet toluene concentration of 100 ppm showed that an 80% breakthrough for toluene was observed after 3 hours, but both MEK and IPA were continuously adsorbed during the same time period. A numerical model simulated that the ${\gamma}-alumina$ could remove toluene at a loading rate of 0.4 mg/min only for a 4-hour period, which might be too short of a duration for real applications. Consequently, lifetime enhancement for ${\gamma}-alumina$ must be implemented, and ozone oxidation and regeneration would be feasible options.

• 한국기후변화학회지
• /
• 제1권2호
• /
• pp.147-161
• /
• 2010

단일 기층의 모형 대기에 적용하기 위한 태양 복사 모델을 기준 모델(Line-by-Line Model: LBL)로 보정하여 2009년 1월부터 2009년 12월까지 한반도의 지표면 태양광 시공간 분포를 계산 및 분석하였다. 이 연구에 사용된 태양 복사 모델의 입력 자료는 기상청(KMA)의 수치모델 자료 그리고 위성자료로부터 도출된 오존 전량과 에어로졸 및 구름 자료 등이 사용되었다. 이 연구 기간 동안 4 km 간격으로 수평면에 대하여 한반도의 지표면 태양광을 계산하였고 그 결과를 지표면 일사 관측값들과 비교하였다. 그 결과 모델에 의하여 계산된 연 누적 태양광은 안동과 대구 및 진주를 연결하는 지역에서 최대값($5,400MJ/m^2$ 이상)이 나타났고 이 값들은 위성 관측 전운량 자료와 잘 일치하였다. 그러나 지표면 일사 관측 자료의 공간 분포는 모델 계산 결과와 차이가 있었으며 그 원인은 관측소 일사계의 보정 및 관리운영에 따른 자료 정확성 때문인 것으로 분석된다.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.25-29
• /
• 2013

Poly ketone (PK) was photo-oxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PK film was investigated by the measurement of reflectance, surface roughness, contact angles, ESCA, and ATR. Reflectance, particularly at the wavelength of 380nm, decreased with increasing UV energy. And the irradiation produced nano-scale roughness on the surface uniformly. The maximum surface roughness increased from 25.3nm for the unirradiated sample to 104.9nm at the irradiation of $42.4J/cm^2$. The improvement in hydrophilicity was caused by the introduction of polar groups such as C-O and C=O bonds resulting in higher $O_{1s}/C_{1s}$. The surface energy of PK film increased from $43.3mJ/m^2$ for the unirradiated sample to $71.9mJ/m^2$ at the irradiation of $31.8J/cm^2$. The zeta potential of the UV-irradiated PK decreased with increased UV energy and the dyeability to cationic dyes increased accordingly, resulting from the photochemically introduced anionic and dipolar dyeing sites on the PK films surfaces.