• 상하수도학회지
• /
• 제18권5호
• /
• pp.588-597
• /
• 2004

In this research, we investigated the variation of transmembrane pressure and permeate water quality with pre coagulation and sedimentation with iron based coagulant and chlorination of feed water for PVDF (polyvinylidene fluoride) based MF membrane filtration. NaCIO was fed to the membrane module with dosage of 0.5mg/L and maintained during filtration. To observe the effect of raw water, three types of raw and processed waters, including river surface water, coagulated water and coagulated-settled water, were applied. In case of river surface water, the transmembrane pressure increased drastically in 500 hours of operation. On the contrary, no significant increase in transmembrane pressure was observed for 1,200 hours of operation for coagulated water and coagulated-settled waters. The turbidity of permeate was lower than a detection limit of equipment for all raw waters. The removal efficiency of humic substances of coagulated water and coagulated-settled water was approximate ten times of that of surface river water. And, the removal efficiency of TOC and DOC was approximate two times of that of surface river water. From the results of plant operation, stable operation was maintained at $0.9m^3/m^2{\cdot}day$ filtration flux through the combination of pre-coagulation and pre-chlorination. However, the water quality of permeate was the best when pre-coagulation-sedimentation process was combined with pre-chlorination.

• 한국수자원학회논문집
• /
• 제49권12호
• /
• pp.971-980
• /
• 2016

일반적으로 배사에 비해서 준설은 경제적 부담이 크기 때문에 배사를 효율적으로 운영하는 것이 중요하다. 본 연구에서는 2차원 하상변동 모형인 Nays2DH를 이용하여 홍수기 운영수위에 따른 배사효율을 낙동강에 위치한 달성보를 중심으로 분석하였다. 분석결과, 가동보의 수 만큼 배사수가 형성되었으며, 배사수로 상류에는 퇴적이 발생하는 것으로 나타났다. 또한, 홍수기 운영수위를 EL. 14.5 m로 운영하는 것이 EL. 14.0 m로 운영하는 것에 비해서 배사효율이 약 4.6% 증가하여 퇴사가 약 4.5% 감소하는 것으로 나타났다. 본 연구에서 분석한 홍수기 운영수위에 따른 배사효율의 변화를 고려한다면, 저수지 퇴사 저감 및 준설주기의 장기화가 가능할 것으로 판단된다.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.252-261
• /
• 2022

The present study concerns assessing the operability of a surface combatant, based on the Percent-Time-Operable (PTO). For validation of the seakeeping analysis in the regular waves, the model test is first conducted in a towing tank. The seakeeping analysis results in the regular waves are expanded to the irregular waves, considering the wave spectra around the Korean peninsula and in North Pacific. The seakeeping criteria of the surface combatant in transit, combat, replenishment operation, and survival condition are defined by the literature review. An annual operation scenario of the surface combatant in two operation areas, i.e., advance speed and wave direction, are combined with the seakeeping analysis results to assess PTO. The main constraints of operability of the surface combatant are identified as the pitch angle and vertical velocity at the helicopter deck.

• 에너지공학
• /
• 제23권2호
• /
• pp.62-73
• /
• 2014

본 연구는 혐기성소화조에서 발생된 바이오가스로부터 바이오메탄을 생산하기 위한 고질화 공정의 운전조건을 최적화하기 위하여 반응표면 분석모델을 적용하였다. 반응표면 분석법의 하나인 Box-Behnken 설계법을 이용하였으며 바이오가스 고질화 공정의 메탄농도와 메탄회수율을 극대화하기 위한 수학적인 최적운전조건을 도출하였다. 도출된 반응표면모델의 적합성을 검증한 결과 각 모델의 p Value가 0.05 이하로서 유의성이 매우 높게 나타났으며, 결정계수($R^2$)는 각각 0.9788, 0.9710 이었다. 그리고 이산화탄소/메탄분리공정에서 메탄농도에 대해 운전압력이 가장 크게 영향을 미치고 다음으로 바이오메탄 생산량, PSA 회전밸브 속도의 순이다. 메탄회수율에 대해서는 PSA 회전밸브 속도가 가장 크게 영향을 미치고 있으며, 바이오메탄 생산량, 운전압력의 순으로 나타났다. 액체바이오 메탄 생산량이 $100Nm^3/hr$일 때의 최적 운전조건을 도출한 결과, 운전압력이 8.0bar 그리고 PSA 회전 밸브 속도가 31.55RPM일 때 바이오메탄의 메탄농도와 메탄회수율을 최대화할 수 있었고, 이때의 바이오메탄의 메탄농도는 97.13%이고, 메탄회수율은 75.89%이었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.37-41
• /
• 1990

The quality of cutting surface such as surface roughness, heat affected zone, serf width can be improved by controlling the parameters of cuting process. These parameters includes cutting velocity, laser beam power, material depth and assistant gas. Thermodynamic analysis and systematical experiments are attempted to pedict and determine the optimal cutting condition. There exists the optimal cutting condition to ensure high quality surface. Under this operation, the minimum surface roughness of the mild steel, the stainless steel and the titanium becomes 3.8${\mu}{\textrm}{m}$ 13${\mu}{\textrm}{m}$ and 10${\mu}{\textrm}{m}$ respectively.

• 한국생산제조학회지
• /
• 제5권3호
• /
• pp.66-72
• /
• 1996

The applicability of a new method, termed the whirling motion concept, for the improvement of the surface finish in milling three-dimensional sculptured surfaces has been investigated. A method for implementing this concept o conventional NC machines that utilize a suitably configured attachment has been proposed. The tool path equation for the ball-end milling process, based on the surface-shaping system, has been obtained. Both results of the computer simulation and the experiment verified the proposed approach.

• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.182-187
• /
• 2018

A low profile asymmetrical fractal boundary patch antenna based on reactive impedance surface (RIS) and a mushroom unit cell (MUC) is proposed and studied for dual band operation. The sides of the square patch antenna are replaced with asymmetrical half circled fractal curves for circular polarization operation at patch mode band. The fractal patch antenna is loaded with MUC for dual band operation. The antenna radiation characteristics are investigated and illustrated with both simulated and experimental results in detail. The 10-dB return loss bandwidth are 8.48% (3.21-3.49 GHz) and 2.59% (2.30-2.36 GHz) at upper and lower resonance frequencies, respectively. The 3-dB axial ratio bandwidth is 4.26% (3.21-3.35 GHz). A close agreement between simulation data with experimental results is observed.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.857-861
• /
• 1996

The influence of rf-plasma operation on the thin film formation containing small particles for Al-Li alloys mainly have been studied as a function of Ar gas pressure and plasma power by means of a 200kV transmission electron microscope (TEM). Under the non-plasma operation, the transition from continuous thin films to clusters of grape-like small particles occurred at Ar gas pressures above 20Pa. Particles were single crystals with clear crystal habit planes. Under the plasma operation, the influence of gas pressures on the film formation at a plasma power of 5W was also examined. Thin films containing particles below 30Pa and the films containing mainly particles above 40Pa were formed. The prominent change of the average particle size was not recognized. The increase of the plasma powers at 20Pa, which formed particles under non-plasma, suppressed growth of particles, and homogeneous films containing very small particles were fabricated. The electric conductivity showed slight decrease with an increase of plasma power.

• 한국항해항만학회지
• /
• 제46권5호
• /
• pp.435-440
• /
• 2022

The development and introduction of a Maritime Autonomous Surface Ship (MASS) are some of the most important changes leading to the fourth industrial era in the maritime area. The term 'MASS' refers to a ship operating independently, without human intervention, to reduce maritime accidents caused by human errors. Recent UK findings MASS also noted that particularly the dynamic positioning system will be considered to apply as newly function to a MASS. The DP system, a ship system developed decades ago and used for specific purposes like offshore operations, provides various functions to facilitate the accurate movements of the vessel, and operators can make decisions within the DP system, in addition to the ordinary ship system. In this paper, it would like to present the connection and application method with the main technical elements of the DP system in connection with the main technology of the DP system to achieve the safe operation of a MASS. In particular, among various position reference systems, the capability plot function of DP system, and the "follow target" mode in the operation mode are attractive functions that can contribute to the safe operation of autonomous ships.

• ETRI Journal
• /
• 제45권3호
• /
• pp.462-478
• /
• 2023

In quantum computing, the use of Pauli frames through software traces of classical computers improves computation efficiency. In previous studies, error correction and Pauli operation tracking have been performed simultaneously using integrated Pauli frames in the physical layer. In such a complex processing structure, the number of simultaneous operations processed in the physical layer exponentially increases as the distance of the surface code encoding logical qubit increases. This study proposes a Pauli frame management architecture partitioned into two layers for a lattice surgery-based surface code and describes its structure and operation rules. To evaluate the effectiveness of our method, we generated a random circuit according to the gate ratios constituting the commonly known quantum circuits and compared the generated circuit with the existing Pauli frame and our method. Simulations show a decrease of about 5% over traditional methods. In the case of experiments that only increase the code distance of the logical qubit, it can be seen that the effect of reducing the physical operation through the logical Pauli frame becomes more important.