• 방사성폐기물학회지
• /
• 제3권4호
• /
• pp.293-300
• /
• 2005

Type 304 stainless steel 시편에 느슨하게 붙어있는 $Eu_2O_3$ 분말에 대한 초음파 제염 거동을 조사하였다. 매질을 물, PFC 및 $0.1\;vol\%$의 음이온 계면활성제를 함유한 PFC 용액으로 변화시킴에 따라 제염계수는 20, 50 및 200으로 증가하였다. 제염계수에 차이가 생기는 이유를 초음파 매질의 표면장력 및 양으로 하전된 산화물 표면과 음이온 계면활성제 사이의 상호작용에 기인한 것으로 설명할 수 있었다. 음이온 계면활성제를 함유한 PFC 용액 내에서 $Eu_2O_3$ 분말로 오염된 평면 시편, 파이프 시편, 틈새 시편 및 용접 시편에 대한 초음파 제염 효과를 관찰하였다. 연구된 모든 시편에 대해, 대부분의 오염물이 완벽하게 제거되는 것으로 나타났다. 길이가 6cm인 파이프 시편에 대해서는 오염물의 $98.5\%$가 제거되었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권6호
• /
• pp.37-45
• /
• 2010

Surfactant-enhanced ozone sparging (SEOS), an advanced version of SEAS (surfactant-enhance air sparging) was introduced in this study for the first time for removal of non-volatile contaminant from aquifer. The advantages of implementing SEAS, enhanced air saturation and expanded zone of sparging influence, are combined with the oxidative potential of ozone gas. Experiments conducted in this study were tow fold; 1-dimensional column experiments for the changes in the gas saturation and contaminant removal during sparging, and 2-dimensional box model experiment for the changes in the size of zone of influence and contaminant removal. An anionic surfactant (SDBS, sodium dodecylbenzene sulfonate) was used to control surface tension of water. Fluorescein sodium salt was used as a representative of watersoluble contaminants, for its fluorescence which is easy to detect when it disappears due to oxidative degradation. Three different gases (air, high-concentration ozone gas, and low-concentration ozone gas) were used for the sparging of 1-D column experiment, while two gases (air and low-concentration ozone gas) were used for 2-D box model experiment. When SEOS was performed for the column and box model, the air saturation and the zone of influence were improved significantly compared to air sparging without surface tension suppression, resulted in effective removal of the contaminant. Based on the experiments observations conducted in this study, SEOS was found to maintain the advantages of SEAS with further capability of oxidative degradation of non-volatile contaminants.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1754-1759
• /
• 2010

대부분의 석조문화재는 실외에 노출되어 있어 외관이 크게 변형되어졌고, 특히 최근의 산업화와 환경오염물질의 영향으로 풍화가 가속화되고 있다. 본 연구에서는 석조문화재의 풍화에 미치는 환경영향을 알아보기 위해 해수와 대기오염물질에 신선한 화강암을 노출 후 물리 화학적 특성을 조사하였고, 석조문화재 보존 방법의 일환으로 화강암에 $TiO_2$ 광촉매를 코팅한 후 코팅이 화강암의 풍화에 미치는 영향도 조사하였다. 인공풍화 실험 후 화강암 표면의 광물질 조성 변화를 확인할 수 있으며, 수분흡수율은 약간 증가하여 해수와 대기오염물질이 화강암의 풍화에 영향을 미치는 것을 알 수 있었다. $TiO_2$ 광촉매를 화강암에 코팅한 경우 $TiO_2$ 광촉매를 코팅하지 않은 경우보다 해수와 대기오염물질에 의한 화강암의 물리적 특성 변화(수분 흡수율 등)가 적어 화강암의 풍화방지에 효과적임을 알 수 있었다.

• 헤리티지:역사와 과학
• /
• 제55권2호
• /
• pp.186-197
• /
• 2022

여주 신륵사 대장각기비는 불경을 만들어 보관하던 곳인 대장각의 조성에 관한 기록이 적힌 고려시대의 비석이다. 비신은 변색이 일어나고 수십 개의 균열이 발생하였으며 부분적으로 결실되어 명문이 일부 훼손된 상태로 오랫동안 유지되어 왔다. 석조유산에 적용할 수 있는 비파괴분석법을 활용하여 대장각기비의 재질조사, 휴대용 X-선 형광분석, 초음파 물성진단을 실시하였다. 재질조사 결과, 비신은 담회색 결정질 석회암으로, 받침석, 지지석, 옥개석은 중조립질 흑운모화강암으로 구성되어 있음을 확인하였다. 대장각기비의 변색오염물은 휴대용 X-선 형광분석 결과 철(Fe)이 원인물질로 판단되었다. 분포양상으로 미루어 비신과 개석 사이에 철을 함유한 물질이 산화되어 흘러내리고 이후 생물이나 유기질 오염물이 부착되면서 황색과 흑색 오염물을 형성한 것으로 해석된다. 초음파 물성진단 결과, 신선한 암석(FR)부터 완전히 풍화된 암석(CW)까지 다양한 풍화도를 보였고 평균 풍화도지수는 3등급(보통)으로 산출되었다. 균열이 집중적으로 나타난 지점은 완전히 풍화된 단계(CW)로 판정되었고, 비신 상부와 하부에 분포하는 일부 균열은 위험도가 매우 높은 것으로 확인되었다. 균열에 대해서는 향후 거동 모니터링과 보강대책 수립이 필요할 것으로 판단된다.

• 한국환경과학회지
• /
• 제15권12호
• /
• pp.1171-1175
• /
• 2006

Deposited road particles (DRPs) were analysed for heavy metal concentrations at four different roads in a city, Korea. The samples were collected using a roadway surface vacuum cleaning vehicle which was commonly used in collecting roadway surface particles. Six particle size ranges were analyzed separately for twelve heavy metal elements (Cd, Cr, Pb, Ni, Al, As, Co, Cu, Fe, Mn, Zn and Hg). At all sampling sites, the high concentration of the heavy metals occurred in the <74um particle size range, which conventional roadway cleaning vehicles do not remove efficiently. The Pb concentration significantly increased with decreasing particle size of DRPs, and other toxic heavy metals (Cd, Cr and Ni) also showed similar results. The heavy metal concentrations in the smaller size fraction of DRPs is important because they are contaminants that are preferentially transported by road runoff during rainfall.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.683-697
• /
• 1996

Industrial ventilation is a crucial engineering measure to protect workers from hazardous airborne contaminants. Designing a ventilation system is not an easy task. To solve this problem, many U. S. computer programs and softwares have been developed. In Korea, asoftware, called as VPMC, was developed by Korea Industrial Safety Corporation. But VPMC could not stand alone since it can be used to design not a hood, but a ventilation system. In this research, therefore, a preprocessing software was developed. It can be used to design general ventilation system, canopy hood, open surface tank hood. The program was written in Microsoft Visual Basic. In near future, this software will be incorporated into a total package software which can be used to design a whole ventilation system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1386-1391
• /
• 2007

The ballast gravels are often contaminated by various pollutants, like diesel fuel, lubricants, and heavy metals. Especially, the gravels near the switching are apt to be polluted by the lubricant. Because this lubricant can pollute the soil of track, the contaminated ballast gravels should be cleaned immediately. In this study, a physical desorption method was used to remove the oil contaminants from the surface of the ballast gravels. Thermosetting resin was used as a media for physical remediation of ballast gravels. The total petroleum hydrocarbon of the gravels was monitored over time. In addition, scanning electron microscopic images were obtained to observe the removal of the oily pollutants from the surface of the gravels.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.52-57
• /
• 2004

Many kinds of gases, such as erosion gas, dilution gas, and toxic gas have been used in manufacturing process of LCD at semiconductor. In order to increase accumulation rate of manufacturing process, high degree of purity in these gases and minimized metalllic dust are required. All wetted stainless steel surface must be 316L electro-polished with $0254{\mu}m$ in average. Based on the AES analysis, Cr/Fe 11 and $Cr_2O_3$ thickness $25{\AA}$ are measured Molybdenum and silicon contaminants which is characteristic of stainless steel and oxygen were found on the surface.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.179-183
• /
• 2005

Particles in the HDD can cause serious damages such as scratches and thermal asperity(TA) at the head/disk interface(HDI). Accordingly, particles cause data loss including physical and electrical damages. To improve the reliability of head-disk interface, understanding the damage characteristics at the HDI due to particle interactions is required. The materials such as $A1_2O_3$, TiC and aluminum were used in this experiment. The size and hardness of particles injected into the HDI are closely relevant to surface damage caused the data loss on the disk and head. In this paper, a variety of scratches were analyzed using scanning electron microscope(SEM) and atomic force microscope(AFM). In order to analyze defects of very small size on the disk, optical surface analyzer(OSA) was also used.

• 한국재료학회지
• /
• 제3권5호
• /
• pp.482-496
• /
• 1993

Radiation damage and contamination of silicons etched in the $CF_4+H_2$ and $CHF_3$ magnetron discharges have been characterized using Schottky diode characteristics, TEM, AES, and SIMS as a function of applied magnetic field strength. It turned out that, as the magnetic field strength increased, the radiation damage measured by cross sectional TEM and by leakage current of Schottky diodes decreased colse to that of wet dtched samples especially for $CF_4$ plasma etched samples, For $CF_4+H_2$and $CHF_3$ etched samples, hydrogen from the plasmas introduced extended defects to the silicon and this caused increased leakage current to the samples etched at low magnetic field strength conditions by hydrogen passivation. The thickness of polymer with the increasing magnetic field strength and showed the minimum polymer residue thickness near the 100Gauss where the silicon etch rate was maximum. Also, other contaminants such as target material were found to be minimum on the etched silicon surface near the highest etch rate condition.