• ALGAE
• /
• v.19 no.1
• /
• pp.23-30
• /
• 2004

The purpose of this study is to assess the effects that hydraulic-gun-aerators have on cyanobactedial bloom in Sayeon Dam Reservoir in Ulsan City, Korea. A total of nine hydraulic-gun-aerators are in operation at the reservoir withe 100 m spacing between each aerator to control severe cyanobacterial bloom in the dam reservoir. The field studies were performed an total four times at two sampling stations in the reservoir from July to August in 2001. The standing crops of phytoplankton did not changed significantly by the operation. The cell concentration of the cyanobacteria at the surface layer were reduced about 10%, which is a poor result for the dispersing cyandobacteria deeper into the water. The average surface temperature during the study was reduced by 2.0$^{\circ}C$ by the hydraulic-gun-aerators. The effect of the operation on the vertical distribution of DO concentration was clear. However, the hydraulic-gun-aerators were not expected to have an effect in the lowest layer of the hypolimnion. In the study, it was proposed that installation distance between each hydraulic-gun-aerator would be proper when they are apart about 120 m based on DO depth profiles.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.680-685
• /
• 2005

Multi-walled carbon nanotubes were purified by using the nitric acid after the mechanical cutting, which carboxylic group might be introduced into the surface of nanotubes. To enhance the dispersion of CNTs, carboxylic groups were substituted in the reaction with octadecyl amine containing a long alkyl group. Nanofibers were manufactured by electrospinning, the solution that mixed with PMMA and ODA-fuctionalized CNTs in dimethyl formamide and dispersed with ultrasonication. Diameter and alignment of nanofibers with various electrospinning parameters, such as the CNT and PMMA concentration in solution, the applied voltage, and the distance to the collector were investigated. As a result, the nanofiber diameter was increased with the increment of PMMA concentration, whereas it was reduced as the applied voltage and the spinning distance was increased. The spinning area became smaller with the distance. The nanofibers were formed without the defect on surface and well aligned in a specific concentration of PMMA and nanotubes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.709-713
• /
• 2004

Characteristics of laser-assisted wet etching of titanium in phosphoric acid were investigated to examine the feasibility of this method for fabrication of high aspect ratio microchannels. Laser power, number of scans, etchant concentration, position of beam waist and scanning speed were taken into consideration as the major process parameters exerting the temperature distribution and the cross sectional profile of etched channels. Experimental results indicated that laser power influences on both etch width and depth while number of scans and scanning speed mainly affect on the etch depth. At a low etchant concentration, the cross sectional profile of an etched channel becomes a U-shape but it gradually turns into a V-shape as the concentration increases. On the other hand, surface of the laser beam focus with respect to the sample surface is found to be a key factor determining the bubble dynamics and thus the process stability. It is demonstrated that metallic microchannels with different cross sectional profiles can be fabricated by properly controlling the process parameters. Microchannels of aspect ratio up to 8 with the width and depth ranges of 8∼32 m and 50∼300 m, respectively, were fabricated.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.939-947
• /
• 2009

In order to produce vinegar using onions, 12 acetic acid bacteria were screened from the juice of fallen peaches, and a strain showing the highest acetic acid productivity among them was selected and identified as Acetobacter tropicalis No. 22. The culture broth containing 2.5%(w/v) of initial sugar concentration showed maximum acetic production after 10 days of cultivation, and the acetic acid was produced at the highest rate and reached the maximum acidity after 2 to 6 days of cultivation when the residual sugar and the ethanol concentration were in the range of 1.6 to 2%(w/v) and 0.6 to 1.8%(v/v), respectively. Also optimum conditions for acetic acid production by response surface method using the fractional factorial design with 3 variables and 5 levels were involved with initial ethanol content of 4.67%(v/v), initial acidity of 0.03%, and initial glucose concentration of 2.35%(w/v) and predicted level of acetic acid production at these conditions was 3.77%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.1
• /
• pp.57-74
• /
• 2009

In order to clarify the vertical ozone distribution in planetary boundary layer of coastal area with complex terrain, an observation campaign was carried out around Gwangyang Bay with dense pollutant emission sources during two days from June, 4 2007. For this observation are Radiosonde, SODAR(SOnic Detection And Ranging) and Tethered ozone sonde were employed. The surface meteorological and photochemical observation data provided by AWS (Automatic Weather System) and AQMS (Air Quality Monitoring System) were also applied for analysis. Synoptic condition is strongly associated with lower level ozone distribution in complex terrain coastal area. Since mesoscale circulation induced by difference of characteristics of land and sea and orographic forcing is predominant under calm synoptic condition, vertical distribution of ozone is complicate and vertical ozone concentration greatly fluctuated. However in second day when synoptic influence become strong, ozone concentration in lower levels is vertically uniform regardless of observation level. This results in vertical observation indicates that vertical ozone distribution is often determined by synoptic condition and also affects surface ozone concentration.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.220-225
• /
• 2009

The water quality in eutrophic lakes is affected by serious problems, such as abnormal increasing of Cyanobacteria. The purpose of this study was to investigate the possibility of a modified flotation system using a hybrid technique formed by chemical compounds and an electrostatic bridge. Therefore, experiments using the hybrid technique were performed to measure the zeta potential value on the phytoplankton surface and the removal efficiencies of phytoplankton, ammonia nitrogen, nitrate nitrogen and phosphoric acid. The results were as follows: Firstly, the zeta potential of M.aeruginosa was observed to approach charge neutralization due to adhesion of magnesium hydroxide precipitate on the phytoplankton surface in the pH range 10.5 to 11. Secondly, the concentration of chlorophyll-a decreased from about 150 to 20${\mu}g$g/L, with a maximum removal efficiency of 84% due to coagulation with pH values higher than 10. Thirdly, the N$H_4$-N concentration was observed to decrease from 0.62 to 0.54mg-N/L (13%), and the P$O_4$-P concentration, which is a limiting factor to the formation of algae blooms, decreased from 0.27 to 0.02mg-P/L (92%). These findings suggest that the modified flotation system can be applied for the purification of the raw water of numerous lakes containing high phytoplankton populations and elevated pH.

• Journal of Environmental Science International
• /
• v.20 no.8
• /
• pp.1049-1059
• /
• 2011

This paper examines the effects of the partial solar eclipse of 22 July 2009 across the Korean peninsular on surface temperature and ozone concentrations in over the Busan metropolitan region (BMR). The observed data in the BMR demonstrated that the solar eclipse phenomenon clearly affects the surface ozone concentration as well as the air temperature. The decrease in temperature ranging from 1.2 to $5.4^{\circ}C$ was observed at 11 meteorological sites during the eclipse as a consequence of the solar radiation decrease. A large temperature drop exceeding $4^{\circ}C$ was observed at most area (8 sites) of the BMR. Significant ozone drop (18~29 ppb) was also observed during the eclipse mainly due to the decreased efficiency of the photochemical ozone formation. The ozone concentration started to decrease at approximately 1 to 2 hours after the event and reached its minimum value for a half hour to 2 hours after maximum eclipse. The rate of ozone fall ranged between 0.18 and 0.49 ppb/min. The comparison between ozone measurements and the expected values derived from the fitted curve analysis showed that the maximum drop in ozone concentrations occurred at noon or 1 PM and was pronounced at industrial areas.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.313-319
• /
• 2001

In order to produce the high quality rehydrated acorn Mook(Korean tradition gel flood) that enhance acceptability, the optimum condition was investigated for the rehydration process of dried Monk as salt concentration(0, 1, 2%), temperature(20, 70, 80, 90$^{\circ}C$) and time. The estimation of moisture gain, rehydration efficiency was analyzed statistically. The surface color md seniory evaluation were undertaken to evaluate the rehydrated Mook quality The optimum rehydration time was decided to 15 minutes and it takes 3 minutes for the cooling tilde. The moisture gain increased as the rehydration temperature increase. And the moisture gain and moisture gain rate were higher at 1% salt solution than other concentration. As the rehydration efficiency, surface color and sensory properties of rehydrated Mook, 1% salt treatment was superior.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.3
• /
• pp.389-396
• /
• 2008

The hybrid model can be used to predict the initial near field mixing and the far field transport of the buoyant jets, which are discharged from the submerged wastewater ocean outfall. In the near field, the jet integral model can be used for single port diffusers while the ${\sigma}$ transformed particle tracking model was used in the far field. In this study, the experimental study was performed to verify the developed hybrid model in the previous research. The developed hybrid model properly predict the surface and vertical concentration distribution of the single buoyant jets with various effluent and ambient conditions. The hybrid model can also simulate the surface concentration distribution of the rosette diffuser except for the parallel diffuser with the higher densimetric Froude number due to the assumption that dynamic effects of the effluent plumes are negligible in the far field. The application of the hybrid model to rosette diffusers can predict the concentration near the diffuser more accurately when the line-plume approximation is used.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.314-316
• /
• 1997

We have studied the epitaxial growth and electrical properties of $Si_{0.8}Ge_{0.2}$, films on Si substrates at $550^{\circ}C$ by LPCVD. In a low $PH_3$, partial pressure region such as below 1.25 mPa, the phosphorus doping concentration increased proportionally with increasing $PH_3$ partial pressure while the deposition rate and the Ge fraction x were constant. In a higher $PH_3$ partial pressure region, the phosphorus doping concentration and the deposition rate decreased, while the Ge fraction slightly increased. The dependence of P incorporation rate on the $PH_3$ partial pressure was similar to the phosphorus doping concentration. According to test results, it suggests that high surface coverage of phosphorus atoms suppress both the $SiH_4$ adsorption/reaction and the $GeH_4$ adsorption/reaction on the surfaces, and the effect is more stronger on $SiH_4$ than on $GeH_4$. In a higher $PH_3$ partial pressure region, the deposition is largely controlled by surface coverage effect of phosphorus atoms.