• 제목/요약/키워드: Surface characteristic

검색결과 2,492건 처리시간 0.031초

굴절파 GRM 해석방법을 응용한 고경사 단층 인지(Ⅰ) - 컴퓨터 모델링 연구 - (Identification of high-dip faults utilizing the GRM technique of seismic refraction method(Ⅰ) - Computer modeling -)

  • 김기영
    • 지구물리
    • /
    • 제2권1호
    • /
    • pp.57-64
    • /
    • 1999
  • 지표 부근의 수직변위 단층을 굴절파 자료로부터 신속하게 인지하기 위한 효과적 방법을 모색하기 위하여, 컴퓨터 모델링을 통하여 GRM 해석법의 특성을 분석하였다. 속도분석 함수가 수진점 사이 거리인 XY값에 따라 단층 부근에서 형태가 변하는 특성을 이용하여, XY값이 적정값보다 큰 경우와 작은 경우의 속도분석 함수값의 차이를 수평 1차 미분하여 구한 함수를 구하였으며 ''구배변화 지시자''로 명명하였다. 굴절면 경사가 작을수록, XY값의 차이가 클수록 구배변화 지시자의 최대치 진폭이 증가하고 진동거리가 짧아져 단층의 위치를 정확하게 지시하는 것으로 분석된다. 이러한 특성을 갖는 구배변화 지시자는 굴절법으로 얻어진 탄성파 자료를 이용하여 지표 근처의 고경사 단층 위치 및 분포 상태를 파악하는데 효과적으로 사용될 수 있을 것으로 기대된다.

  • PDF

비방사 마이크로 스트립 선로를 이용한 밀리미터 대역의 세라믹 필터 개발 (Development of Ceramic Filter Using Non Radiative Microstrip Line In Millimeter-Wave)

  • 신천우;김태헌
    • 한국통신학회논문지
    • /
    • 제32권6A호
    • /
    • pp.648-656
    • /
    • 2007
  • 본 논문은 S-라인(비방사 마이크로 스트립)을 이용하여 무선 가입자 회선(WLL) 및 지역 다지점 분배 서비스(LMDS) 등 광대역 무선 가입자 망으로의 기술 적용을 위한 밀리미터 대역의 중심주파수 37GHz에서 세라믹을 이용한 대역 통과 필터에 관한 것이다. 아래 위가 도체로 덮인 유전체 기판 위의 선로 사이에 세라믹 공진기를 삽입시켜, 구조적 공진 특성을 이용함으로써 필터 특성을 얻어내는 방법으로 제작하였다. 이러한 필터 구조와 특성을 근거로 한 시뮬레이션을 하여, 1단 세라믹 공진기의 공진주파수를 찾는 공식과 4단 세라믹 공진기의 대역을 구하는 공식을 일반화 하였다. 또한, 4단 세라믹 공진기의 시뮬레이션 결과를 바탕으로 제작된 실험 구조물을 Network Analyzer를 사용하여 실험을 실시하였으며, 시뮬레이션 결과의 대역은 36.58GHz-37.650GHz, 리플과 손실은 -ldB 이내. Cutoff 특성은 S(2,1)그래프의 대역 좌우로 -35dB밑으로 1GHz이내인 것에 대하여 실험 결과의 대역은 36.6GHz-37.65GHz, 손실은 -ldB이내, 리플은 -3dB이내, Cutoff 특성은 S(2,1)그래프의 대역 좌우로 -30dB밑으로 1GHz 이내인 특성을 나타내었다.

공진기의 임피던스 변화에 근거한 비접촉 생체 신호 센서 (Non-Contact Vital Signal Sensor Based on Impedance Variation of Resonator)

  • 김기윤;김상규;홍윤석;육종관
    • 한국통신학회논문지
    • /
    • 제38C권9호
    • /
    • pp.813-821
    • /
    • 2013
  • 본 논문에서는 공진기의 임피던스 변화에 근거한 생체 신호 센서를 제안한다. 제안된 생체 신호 센서는 호흡과 심장 박동 같은 생체 신호를 감지할 수 있고, 시스템은 공진기, 발진기, SAW 필터, 그리고 파워 감지기로 구성되어있다. 인체와 같은 유전체의 주기적인 움직임은 근거리 장 영역 안에서 공진기의 임피던스 변화를 야기하며, 따라서 공진기의 공진 주파수의 변화는 발진기의 발진 주파수 변화에 영향을 끼친다. 여기서 SAW 필터 저지대역의 가파른 주파수 응답특성은 작은 양의 주파수 편차를 큰 변화로 바꿀 수 있다. 기존의 센서의 감지 거리를 확장시키는 것을 목적으로 ISM 대역 870 MHz 대역에서 동작 시켰으며, 최대 거리 120 mm에서 호흡과 심장 박동신호의 검출을 확인하였다.

CVD법을 이용한 보론 포스파이드의 저온 층착과 특성에 관한 연구 (A Study on the Deposition of Boron Phosphide at the Low Temperature using CVD Method and its Characteristics)

  • 윤여철;김순영;박윤권;강재경;김철주
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.103-107
    • /
    • 2000
  • Boron Phosphide films were deposited on the glass substrate at the low temperature, 55$0^{\circ}C$, by the reaction of B$_2$H$_{6}$ with PH$_3$ using CVD. $N_2$ was employed as carrier gas. The optimal gas rates were 50 $m\ell$/min for B$_2$H$_{6}$, 50 $m\ell$/min for PH$_3$ $m\ell$/min and 1.5 $\ell$/min for $N_2$. To investigate the annealing effect, the films were annealed for 1hour, 3hours in $N_2$ambient at 55$0^{\circ}C$ and tested. The deposition rate was 1000$\AA$/min and the refractive index of film was 2.6. The measurement of X-RD shows that the films have the preferred orientation of (1 0 1) and the intensity of the peak for (1 0 1) orientation decreases according to the annealing time. The data of VIS spectrophotometer proved that the films are transparent in the visible range and the maximal transmittance increases according to the annealing time; 75.49% for as-deposited, 76.71% for 1hr-annealed and 86.4 % for 3hrs-annealed. The measurement of AFM shows that the average surface roughness increases according to the annealing time; 73$\AA$ for as-deposited, 88.9$\AA$ for 1hr-annealed and 220$\AA$ for 3hrs-annealed. Also, The data of the secondary electron emission rate(Υ) shows that the secondary electron emission rate increases according to the annealing time; 0.317 for 1hr-deposited, 0.357 for 1hr-annealed and 0.537 for 3hrs-annealed. And, The measurement of FT-IR that the characteristic of transmittance in the infrared range was stabilized through annealing.ing.

  • PDF

직접전단시험에 의한 모래와 인공암석 경계면의 마찰각 특성 연구 (A Study of Characteristic of Friction Angles between Sand and Artificial Rock Interface by Direct Shear Test)

  • 양홍석;이벽규;장승진;이수곤
    • 한국지반환경공학회 논문집
    • /
    • 제13권8호
    • /
    • pp.65-73
    • /
    • 2012
  • 우리나라 화강암 분포지역에서 주로 발견되는 토사-암 경계면은 토사 자체의 전단강도보다 더 작은 값을 갖기 때문에 강우 시 비탈면 붕괴의 중요한 요인 중 하나로 알려져 있다. 그러나 토사-암 경계면이 비탈면의 안정성에 미치는 영향에 대한 연구가 부족한 실정이다. 따라서 본 연구에서는 토사-암 경계면이 비탈면 안정성에 미치는 영향을 파악하기 위한 기초 연구로써 서로 다른 입도를 갖는 세 종류의 모래와 이를 이용한 인공 암석을 제작하여 모래, 모래-인공암석 경계면에서의 전단강도를 얻기 위한 직접전단시험을 실시하였다. 직접전단시험 결과, 경계면 마찰각은 입도와 표면 거칠기에 따라 변화하며, 경계면 마찰각비 ${\mu}(={\delta}/{\Phi})$는 약 0.75 ~ 0.96의 범위를 갖으며, 이러한 시험 결과들은 모래 자체보다 모래-인공암석 경계면의 마찰각이 더 작은 값을 갖는다는 것을 나타낸다.

수치해석에 의한 토목섬유 보강 폐기물 매립지반의 지지력 평가 (Estimation on Bearing Capacity of Waste Landfill Reinforced by Geosynthetics Using Numerical Analysis)

  • 신은철;박정준
    • 한국지반환경공학회 논문집
    • /
    • 제9권2호
    • /
    • pp.67-74
    • /
    • 2008
  • 세계적으로 폐기물의 발생량이 급증하여 매립지의 숫자가 급증하고 있으나 사용이 완료된 매립지의 처리에 많은 어려움이 있다. 특히, 도시 폐기물 매립지는 인구밀집 지역과의 근접성, 부지개발에 따른 경제적 가치의 급등 등의 이유로 활용 가능한 새로운 건설부지로서 많은 관심이 집중되고 있다. 그러나, 폐기물 매립지반 위에 구조물을 축조할 경우, 특별한 안정처리 및 보강처리를 하지 않게 되면 지반침하, 구조물에 대한 지지력 확보 등에 문제점이 발생될 수 있다. 따라서, 본 연구에서는 수치해석시 무보강, 토목섬유 보강후 상부에 화강풍화토로 복토하여 토목섬유 보강지반의 지지력 특성을 평가하였다. 즉, 탄성모델을 기초로 2차원 해석시 하중재하에 따른 지표면의 무보강 및 보강의 경우, 각각의 수직변위 및 수평변위를 분석하여 토목섬유의 보강효과를 규명하였다.

  • PDF

Effect of Reaction Conditions on the Particle Properties for Synthesis of Stabilized Zirconia by Modified Oxalate Method

  • Park, Hyun-wook;Lee, Young Jin;Kim, Jin-Ho;Jeon, Dae-Woo;Hwang, Hae Jin;Lee, Mi Jai
    • 한국세라믹학회지
    • /
    • 제53권5호
    • /
    • pp.529-534
    • /
    • 2016
  • Nanocrystalline powder of zirconia stabilized with 8 mol% yttria (YSZ) has been synthesized through oxalate process using $ZrOCl_2{\cdot}8H_2O$ and $Y(NO_3)_3{\cdot}6H_2O$ as starting materials. Understanding of the characteristic changes of YSZ powder as a function of processing conditions is crucial in developing dense and porous microstructures required for fuel cell applications. In this research, microstructure change, surface area, particle shape and particle size were measured as a function of different processing conditions such as calcination temperature, stirring speed and concentration of starting materials. The resultant crystallite sizes were calculated by XRD-LB (X-Ray Diffraction Line-Broadening) method, BET method, and morphology of the crystal was observed in TEM and FE-SEM. The TEM examination showed that the powder synthesized with 0.7 M of YSZ concentration had a spherical morphology with sizes ranging from 20 to 40 nm. However, the powder was gradually aggregated above 1.0 M of YSZ concentration with the aggregation being intensified as the YSZ concentration was increased.

한반도 동남연안지역의 냉수대 영향과 해풍의 상호관련성 연구 (A Study of Interrelationships between the Effect of the Upwelling Cold Water and Sea Breeze in the Southeastern Coast of the Korean Peninsula)

  • 이화운;지효은;이순환
    • 한국대기환경학회지
    • /
    • 제25권6호
    • /
    • pp.481-492
    • /
    • 2009
  • The characteristic of cold water by upwelling in the southeast of the Korean Peninsula and the effect of sea breeze in this region are investigated. The coastal upwelling around the southeast coast of the Korea Peninsula is analyzed by using Coastal Oceanographic Data statistical analyses for 5 years were carried out. The period of an cold water event, on the average, was observed southwesterly wind events. The analysis suggests that strong and persistent southwesterly winds in period of an cold water play an important role of bring the moisture to the surface, generating persistent cyclone as jangma. In order to investigate the effect of cold water on sea breeze, we considered two case. First, Exp. 1 is not occurred coastal upwelling on sea breeze. Second, Exp. 2 is occurred cold water on sea breeze. Two experiments were completed separately to the effects of cold water by upwelling. The results show the sea breeze is stronger in Exp. 2, when the cold water occurs, and weaker in Exp. 1, when there is no cold water. In order to verify the effect of the sea breeze on the cold water by upwelling, on the intensification and change of direction of the prevailing wind, the sea breeze effectively intensify cold water condition.

도시 공공공간 디자인 평가 지표 도출 및 개선 방안 연구 (A Study on the Design Evaluation Indicators and Improvements of Urban Public Space)

  • 이훈길;이주형
    • 한국산학기술학회논문지
    • /
    • 제16권11호
    • /
    • pp.8021-8029
    • /
    • 2015
  • 본 논문은 공공공간의 개선 방안을 위하여 고려되어야 하는 평가 지표를 도출하고 공무원/학계 및 실무자 측면에서 중요도를 비료/분석하고자 하였다. 이를 위하여 공공공간의 특성에 따른 계획항목을 선행연구를 바탕으로 도출하고, 세부지표들을 선별 후 전문가그룹인터뷰(FGI : Focus Group Interview)를 통하여 도출과정의 적합성과 도출된 항목들에 대한 부적합 여부를 논의하고, 합의된 항목만을 선정하였다. 선정된 지표는 전문가 설문을 통한 계층적 의사결정법(AHP : Analytic Hierachy Process)을 실시하여 중요도를 분석하고 종합순위를 도출하였다. 연구 결과, 공공공간의 중요도는 실무 전문가의 경우 사용성, 공공성, 환경성, 연계성, 정체성, 공간성 순으로 나타났으며, 공무원/학계는 사용성, 환경성, 연계성, 정체성, 공간성, 공공성 순으로 나타났다. 또한 종합분석 결과 우선순위에서 실무 전문가는 안전성을 가장 중요한 요소로 인식했으며, 공무원/학계는 청결성이 가장 중요한 요소로 나타났다. 본 연구에서 도출된 결과는 향후 공공공간의 개선 방안을 위한 계획적인 고려사항 및 평가로 활용될 수 있는 지표로 활용될 수 있을 것이며, 공공공간의 디자인가이드 라인으로 제시될 수 있다.

외부전극 형광램프를 위한 유도-용량형 플라즈마의 휘도특성 (Brightness Property of ICCP(Inductive Capacitive Coupled Plasma) for External Electrode Fluorescent Lamp (EEFL))

  • 이성진;최기승;채수길;박대희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1657-1658
    • /
    • 2006
  • An external electrode fluorescent lamps (EEFLs) have the advantage of a long lifetime in the early stages of the study on plasma discharge, interest in the lamp continues. Studies on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter. To solve these problems of CCFL, EEFL (External Electrode Fluorescent Lamp) is introduced. Because electrode of EEFL is on the outer surface of discharge tube, the electrode is perfectly prevented from the sputtering by accelerated ions. And it is possible to drive the many CCFLs at the same time, because EEFL shows the positively resistant characteristic. But EEFL has the large non-radiative power loss in sheath. In this study the novel electrode structure was introduced in order to reduce non-radiative power loss in sheath of EEFL. The novel electrode structure comes from the idea to combine conceptually capacitive discharge with inductive discharge. Thus, this study verifies the change in the optical characteristics according to the change in electrode structure through a Maxwell's electromagnetic field simulation and examines the relationship between the change in the EEFL electrode structure and brightness by measuring the optical characteristics.

  • PDF