• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.524-527
• /
• 1995

The temperature dependence of spin wave mode separation in amorphous $Co_{89.5}Zr_{10.5}$ thin film has been investigated at temperatures between 100 K and 300 K. The magnetization and the spectroscopic splitting factor were obtained for the main resonance mode in parallel and perpendicular magnetic field. ${\Delta}H_{2-3}$, the difference between resonance field of mode 2 and the resonance field of mode 3, increases with decreasing temperature. The linewidth increases for all the modes with decreasing temperature. Especially in mode 3 it increases rapidly below 200 K. This phenomenon could be caused by the increase of exchange stiffness constant or the decrease of surface magnetic anisotropy constant with decreasing temperature.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.120-121
• /
• 2003

아조벤젠 고분자는 광 정보저장 및 광 스위치 소자 등의 응용가능성 때문에 많은 연구가 진행되어왔다. 이것은 바로 아조 분자가 가지고 있는 두 이성체 간의 광 이성화 과정에 의한 아조 분자의 정렬에 의한 광 유도 anisotropy가 생기는 특성과 더불어 아조 분자의 이동에 의한 표면 부조가 형성됨이 보고된 이후에 광 정보 저장은 물론 액정의 배향이나 phase mask로의 응용, 특히 photonic band gap(PBG) 효과를 기대 할 수 있는 주기구조 형성에의 응용성 때문에 더욱 관심이 집중되고 있다.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.87-90
• /
• 1998

ABSTRACT- we have analyzed the effect of microstructure and interface conditions on the anisotropic exchange filelds of NiO/NiFe bilayers. The NiO films were deposited by R.F. magentron sputtering. By using different atgon pressure NiO Films, Grain Size And Surface Roughness Of NiO can be manipulated. The exchange field is enhanced in the small granined NiO And This Increment Is Based On The Formation Of Small Domains In NiO

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.05a
• /
• pp.82-83
• /
• 2000

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.24-29
• /
• 1995

The magnetic amd magneto-optical(MO)properties of Co-based multilayered(ML)films are known to vary sensitively according to the manufacturing methods and the film microstructures. Co/Pd and Co/Pt ML films with ultrathin layers of Co were prepared by alternating deposition in an ultrahigh-vacuum physical-vapor-deposition system. The individual layer thicknesses of the samples were estimated making use of the angular positions of x-ray diffraction peaks. The magnetic and MO properties were investigated, and correlated systematically to the structural parameters of the films. A Kerr spectrometer was self-manufactured to measure the MO properties such as Kerr rotation angle, ellipticity and reflectivity. The rms surface roughness was also measured using atomic force microscopy. Some of the samples showed good properties for MO medium, such as large perpendicular magnetic anisotropy and Kerr rotation, and perfect squareness of the magnetic hysteresis loop.

• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.43-50
• /
• 2006

In this paper, the influences of microstructural and surface morphological developments on the soft magnetic properties and giant magneto-impedance (GMI) effect of the $Fe_{73.5-x}Cr_{x}Si_{13.5}B_{9}Nb_{3}Au_1$ (x = 1, 2, 3, 4, 5) alloys have been presented. It was found that the Cr addition slightly decreased the mean grain size of $\alpha-Fe(Si)$ grains. AFM results indicate a large variation of surface morphology of density and size of protrusions along the ribbon plane due to microstructural changes caused by thermal annealing with increasing Cr content. Ultrasoft magnetic properties of the nanocrystallized samples were noticeably enhanced by properly heat treatments at $T_a=540^{\circ}C$ such as an increase of the magnetic permeability and the decrease of coercivity, which is likely due to the formation of nanoscale $\alpha-Fe(Si)$ phase which reduced the magnetoelastic anisotropy of samples. Accordingly, the GMI effect was observed in the annealed samples. The correlation between the microstructure, surface morphology, and soft magnetic properties were explained by nucleation and growth model.

• Journal of Magnetics
• /
• v.7 no.3
• /
• pp.72-79
• /
• 2002

Local M-H loops have been measured on the free layer of a tunneling magnetoresistance (TMR) junction using the magneto-optical Kerr effect (MOKE) system, with an optical beam size of about 2 $\mu$m diameter. Tunnel junctions were deposited using the DC magnetron sputtering method in a chamber with a base pressure of 3$\times$10$^{-9}$ Torr. The relatively irregular variations of coercive force H$_c$(∼17.5 Oe) and unidirectional anisotropy field H$_{ua}$(∼7.5 Oe) in the as-deposited sample are revealed. After $200{^{\circ}C}$ annealing, He decreases to 15 Oe but H$_{ua}$ increases to 20 Oe with smooth local variations. Two-dimensional plots of H$_c$ and H$_{ua}$ show the symmetric saddle shapes with their axes aligned with the pinned layer, irrespective of the annealing field angle. This is thought to be caused by geometric effects during deposition, together with a minor annealing effect. In addition, the variation of root mean square (RMS) surface roughness reveals it to be symmetric with respect to the center of the pinned-layer axis, with the roughness of 2.5 $\AA$ near the edge and 5.8 $\AA$ at the junction center. Comparison of surface roughness with the variation of H$_{ua}$ suggests that the H$_{ua}$ variation of the free layer is well described by dipole interactions related to surface roughness. As a whole, the reversal magnetization is not uniform over the entire junction area and the macroscopic properties are governed by the average sum of local distributions.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.345-363
• /
• 2020

This study was conducted to identify the effect of kerfing and incising pretreatments on high-temperature drying characteristics of cedar and larch boxed-heart timbers with a cross section of less than 150 mm. The result showed that the pretreatments have made a significant difference regarding surface check and shrinkage. Although the kerfing was suitable as a pretreatment to reduce the occurrence of surface check, the incising was not suitable as a pretreatment since the knives of timber joined together, causing the conversion to the surface checks. The shrinkage showed a significant result that the final moisture content was reduced in the order of incising, kerfing, and kerfing-incising after the drying process based on the pretreatment condition. Twist was more affected by the grain angle than the anisotropy of the juvenile wood, and there was no effect of pretreatments.

• Korean Journal of Remote Sensing
• /
• v.21 no.6
• /
• pp.445-456
• /
• 2005

The land surface parameters should be determined with sufficient accuracy, because these play an important role in climate change near the ground. As the surface reflectance presents strong anisotropy, off-nadir viewing results a strong dependency of observations on the Sun - target - sensor geometry. They contribute to the random noise which is produced by surface angular effects. The principal objective of the study is to provide a database of accurate surface reflectance eliminated the angular effects from MODIS 250m reflective channel data over Korea. The MODIS (Moderate Resolution Imaging Spectroradiometer) sensor has provided visible and near infrared channel reflectance at 250m resolution on a daily basis. The successive analytic processing steps were firstly performed on a per-pixel basis to remove cloudy pixels. And for the geometric distortion, the correction process were performed by the nearest neighbor resampling using 2nd-order polynomial obtained from the geolocation information of MODIS Data set. In order to correct the surface anisotropy effects, this paper attempted the semiempirical kernel-driven Bi- directional Reflectance Distribution Function(BRDF) model. The algorithm yields an inversion of the kernel-driven model to the angular components, such as viewing zenith angle, solar zenith angle, viewing azimuth angle, solar azimuth angle from reflectance observed by satellite. First we consider sets of the model observations comprised with a 31-day period to perform the BRDF model. In the next step, Nadir view reflectance normalization is carried out through the modification of the angular components, separated by BRDF model for each spectral band and each pixel. Modeled reflectance values show a good agreement with measured reflectance values and their RMSE(Root Mean Square Error) was totally about 0.01(maximum=0.03). Finally, we provide a normalized surface reflectance database consisted of 36 images for 2001 over Korea.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.293-294
• /
• 2009

We proposed a novel single gap transflective liquid crystal display (LCD) using liquid crystal with negative dielectric anisotropy. We designed cell structure driven by fringe electric field in the transmissive (T) part and vertical electric field in the reflective (R) part. In the device, high surface pretilt angle of the LC in the R-part is achieved through polymerization of an UV curable reactive mesogen (RM) monomer at surfaces. By optimizing the parameters, a newly developed transflective display has characteristics such as single gap and single gamma curve.