• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.637-642
• /
• 2002

An arc-shaped line array slit has been used for the laser generation of focused Lamb waves. The spatially expanded Nd:YAG pulse laser was illuminated through the arc-shaped line array slit on the surface of a sample plate to generate the Lamb waves of the same pattern as the slit. Then the generated Lamb waves were focused at the focal point of which distance from the slit position is dependent on the curvature of slit arc. The proposed method showed better spatial resolution than the conventional linear array slit in the detection of laser machined linear defect and drill machined circular defect on aluminum plates of 2mm thickness. Using the focused waves, we could detect the linear defect and the circular defect with the improvement of spatial resolution. The method can also be combined with the scanning mechanism to get an image just like by the scanning acoustic microscope(SAM).

• 비파괴검사학회지
• /
• 제32권4호
• /
• pp.388-392
• /
• 2012

본 연구에서는 표면파의 음향비선형 특성 측정을 위해 선 배열 레이저 빔을 이용하여 협대역의 표면파를 발생시키고 레이저 TWM(Two-Wave Mixing) 방식으로 수신하는 완전 비접촉 측정 방법이 도입되었다. 이 기술은 알루미늄 합금의 소성변형과 음향비선형 특성과의 상관성을 조사하는데 적용되었다. 그 결과, 재료의 소성변형에 따라 음향 비선형성이 비례적으로 증가하는 것으로 나타났으며, 이는 접촉식 PZT 탐촉자 수신 방법으로 측정한 결과와 동일한 경향이다.

• 비파괴검사학회지
• /
• 제33권3호
• /
• pp.276-282
• /
• 2013

This paper proposes an ultrasonic method for measurement of linear and hysteretic interfacial stiffness of contacting surfaces between two steel plates subjected to nominal compression pressure. Interfacial stiffness was evaluated by the reflection and transmission coefficients obtained from three consecutive reflection waves from solid-solid surface using the shear wave. A nonlinear hysteretic spring model was proposed and used to define the quantitative interfacial stiffness of interface with the reflection and transmission coefficients. Acoustic model for 1-D wave propagation across interfaces is developed to formulate the reflection and transmission waves and to determine the linear and nonlinear hysteretic interfacial stiffness. Two identical plates are put together to form a contacting surface and pressed by bolt-fastening to measure interfacial stiffness at different states of contact pressure. It is found from experiment that the linear and hysteretic interfacial stiffness are successfully determined by the reflection and transmission coefficient at the contact surfaces through ultrasonic pulse-echo measurement.

• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.121-129
• /
• 2019

The present study investigates the propagation of shear waves in a composite structure comprised of imperfectly bonded piezoelectric layer with a micropolar half space. Piezoelectric layer is considered to be initially stressed. Micropolar theory of elasticity has been employed which is most suitable to explain the size effects on small length scale. The general dispersion equations for the existence of waves in the coupled structure are obtained analytically in the closed form. Some particular cases have been discussed and in one particular case the dispersion relation is in well agreement to the classical-Love wave equation. The effects of various parameters viz. initial stress, interfacial imperfection and micropolarity on the phase velocity are obtained for electrically open and mechanically free system. Numerical computations are carried out and results are depicted graphically to illustrate the utility of the problem. The phase velocity of the shear waves is found to be influenced by initial stress, interface imperfection and the presence of micropolarity in the elastic half space. The theoretical results obtained are useful for the design of high performance surface acoustic devices.

• 한국항공우주학회지
• /
• 제46권5호
• /
• pp.376-384
• /
• 2018

본 연구에서는 투과면을 이용하는 음향상사법으로 제자리 비행하는 UH-1H 로터 블레이드 주위의 원방 소음을 예측하였다. 두께 소음과 하중 소음, 그리고 충격파 및 끝단 후류 등에 의해 발생하는 유동 소음을 예측하기 위해 블레이드 표면을 포함하는 투과면을 구성하였다. 3차원 압축성 Euler 방정식 및 Navier-Stokes 방정식을 적용하여 공력 해석을 수행하고 비교하였다. 투과면의 위치에 따라 High Speed Impulsive 소음을 예측 및 검증하였다. 블레이드 끝단에서 발생하는 충격파에 의한 소음원이 지배적인 요소임을 확인하였으며, 충격파를 온전히 포함하도록 투과면을 구성하는 것이 중요함을 보였다.

• Geomechanics and Engineering
• /
• 제18권6호
• /
• pp.605-614
• /
• 2019

The present paper seeks to investigate propagation and reflection of waves at free surfaces of homogeneous, anisotropic and rotating micropolar fibre-reinforced medium with voids. It has been observed that, in particular when P-wave is incident on the free surface, there exist four coupled reflected plane waves traveling in the medium; quasi-longitudinal displacement (qLD) wave, quasi-transverse displacement (qTD) wave, quasi-transverse microrotational wave and a wave due to voids. Normal mode Analysis usually called harmonic solution method is adopted in concomitant with Snell's laws and appropriate boundary conditions in determination of solution to the micropolar fibre reinforced modelled problem. Amplitude ratios which correspond to reflected waves in vertical and horizontal components are presented analytically. Also, the Reflection Coefficients are presented using numerical simulated results in graphical form for a particular chosen material by the help of Mathematica software. We observed that the micropolar fibre-reinforced, voids and rotational parameters have various degrees of effects to the modulation, propagation and reflection of waves in the medium. The study would have impact to micropolar fibre-reinforecd rotational-acoustic machination fields and future works about behavior of seismic waves.

• 한국음향학회지
• /
• 제19권5호
• /
• pp.41-45
• /
• 2000

단결정 초격자 다층박막의 유효탄성계수를 표면탄성파 전파속도에 근거하는 두 가지 방법에 의하여 결정하였다. 첫째 방법은 구성층의 탄성계수로부터 초격자의 유효탄성계수를 계산하는 공식을 사용한다. 계산된 유효탄성계수로 계산한 기판 위 박막의 표면탄성파 전파속도와 선집속 초음파현미경으로 측정한 표면탄성파 전파속도를 비교하여 그 유효탄성계수를 검증한다. 둘째 방법은 선집속 초음파현미경으로 측정한 표면탄성파 전파속도 분산 데이터로부터 역산하여 초격자 다층박막의 유효탄성계수를 결정한다. 두 가지 방법을 TiN/NbN 초격자 다층박막에 적용하여 서로 잘 일치하는 결과를 얻었다.

• 대한의용생체공학회:의공학회지
• /
• 제40권5호
• /
• pp.151-157
• /
• 2019

An acoustofluidic device using conductive liquid-based electrodes was developed for malaria parasite separation from white blood cells. In this device, the electrode channels filled with a conductive liquid were used to generate standing surface acoustic waves (SSAWs) in a fluidic channel, which can overcome the limitation of conventional patterned metal electrodes. Separation performance of the device was evaluated using fluorescent polystyrene particles with two different sizes (2 and $10{\mu}m$ diameters), which were successfully separated. In addition, a mixture of malaria parasites and white blood cells were also efficiently separated with high purity of ~98% in the CL-SSAW device at the flow rate of $12{\mu}l/min$.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.241-262
• /
• 2012

Some applications require structural health monitoring in inaccessible components. This paper presents a technique useful for Structural Health Monitoring of double wall structures, such as double wall steam pipes and double wall pressure vessels separated from an ultrasonic transducer by three layers. Detection has been demonstrated at distances in excess of one meter for a fixed transducer. The case presented here is for one of the layers, the middle layer, being a fluid. For certain transducer configurations the wave propagating in the fluid is a wave with low velocity and attenuation. The paper presents a model based on wave theory and finite element simulation; the experimental set-up and observations, and comparison between theory and experiment. The results provide a description of the technique, understanding of the phenomenon and its possible applications in Structural Health Monitoring.

• 한국음향학회지
• /
• 제25권4호
• /
• pp.164-171
• /
• 2006

임의의 등방성재료에 대한 종파, 횡파 및 누설표면파의 음속을 알면 해석적으로 그 재료의 탄성정수와 밀도를 산출할 수 있다. 종래, 그 음속들은 각각 다른 진동모드를 갖는 세 개의 초음파 트랜스듀서에 의해 측정되어져 왔다. 본 연구에서는 하나의 트랜스듀서에 의해 그 세 가지 파의 개략적인 음속을 동시에 측정하기위한 전극분할형 PVDF 직선집속 초음파 트랜스듀서를 새로이 제안하고, 설계, 제작하였다. 그리고 그것에 의한 각 파의 음속측정 방법을 확립한 후, 용융석영 등 몇몇 등방성재료에 적용하였다. 또한, 측정된 각 파의 음속을 이용하여 탄성 강성정수 및 밀도를 산출하고, 각 값들의 오차를 검토하였는데, 얻어진 값들은 문헌치와 비교적 잘 일치함을 알 수 있었다.