• Journal of KIBIM
• /
• v.13 no.2
• /
• pp.1-15
• /
• 2023

Since the 1960s, the Korean Peninsula, which consists of 77.4 of the country's land and mountains, has seen a surge in demand for buildings due to population concentration due to urbanization and industrialization. Since then, the development of slopes has been inevitable due to the concentration and expansion of the city's population. When building a building on a slope, it is important to set the height of the surface. In this case, the means of regulating buildings in construction-related laws, such as the building closure ratio, floor area ratio, number of floors and total floor area of buildings, have an overall effect on buildings through the height of the surface. In the Korean Building Act, the setting of the height of the ground affects the calculation of the building height limit standard and the calculation of the underground floor, and it takes a long time to calculate. Therefore, the time required for attempts to change various design plans of buildings increases. The purpose of this study is to speed up the time required to calculate the weighted average of the surface when constructing buildings on slopes. In addition, the existing calculation process allows various design attempts compared to the same time given.

• Geomechanics and Engineering
• /
• v.36 no.1
• /
• pp.83-97
• /
• 2024

It is important to make reasonable prediction about the long-term deformation of high rockfill geostructures. However, the deformation is usually underestimated using the rockfill parameters obtained from laboratory tests due to different size effects, which make it necessary to identify parameters from in-situ monitoring data. This paper proposes a novel hybrid back-analysis method with a modified objective function defined for the time-dependent back-analysis problem. The method consists of two stages. In the first stage, an improved weighted average method is proposed to quickly narrow the search region; while in the second stage, an adaptive response surface method is proposed to iteratively search for the satisfactory solution, with a technique that can adaptively consider the translation, contraction or expansion of the exploration region. The accuracy and computational efficiency of the proposed hybrid back-analysis method is demonstrated by back-analyzing the long-term deformation of two high embankments constructed for airport runways, with the rockfills being modeled by a rheological model considering the influence of stress states on the creep behavior.

• Structural Engineering and Mechanics
• /
• v.54 no.3
• /
• pp.561-577
• /
• 2015

The main objective of this paper is to study the dynamic load allowance (DLA) calculation methods for bridges according to the dynamic response curve. A simply-supported concrete bridge with a smooth road surface was taken as an example. A half-vehicle model was employed to calculate the dynamic response of deflection and bending moment in the mid-span section under different vehicle speeds using the vehicle-bridge coupling method. Firstly, DLAs from the conventional methods and code provisions were analyzed and critically evaluated. Then, two improved computing approaches for DLA were proposed. In the first approach, the maximum dynamic response and its corresponding static response or its corresponding minimum response were selected to calculate DLA. The second approach utilized weighted average method to take account of multi-local DLAs. Finally, the DLAs from two approaches were compared with those from other methods. The results show that DLAs obtained from the proposed approaches are greater than those from the conventional methods, which indicate that the current conventional methods underestimate the dynamic response of the structure. The authors recommend that the weighted average method based on experiments be used to compute DLAs because it can reflect the vehicle's whole impact on the bridge.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.367-370
• /
• 2006

Performances of multiple surrogate models are evaluated in a turbomachinery blade shape optimization. The basic models, i.e., Response Surface Approximation, Kriging and Radial Basis Neural Network models as well as weighted average models are tested for shape optimization. Global data based errors for each surrogates are used to calculate the weights. These weights are multiplied with the respective surrogates to get the final weighted average models. The design points are selected using three level fractional factorial D-optimal designs. The present approach can help address the multi-objective design on a rational basis with quantifiable cost-benefit analysis.

• Atmosphere
• /
• v.17 no.4
• /
• pp.327-337
• /
• 2007

In this study, we examined the new ensemble training approach to reduce the systematic error and improve prediction skill of wind by using the Short-range Ensemble prediction system (SENSE), which is the mesoscale multi-model ensemble prediction system. The SENSE has 16 ensemble members based on the MM5, WRF ARW, and WRF NMM. We evaluated the skill of surface wind prediction compared with AWS (Automatic Weather Station) observation during the summer season (June - August, 2006). At first stage, the correction of initial state for each member was performed with respect to the observed values, and the corrected members get the training stage to find out an adaptive weight function, which is formulated by Root Mean Square Vector Error (RMSVE). It was found that the optimal training period was 1-day through the experiments of sensitivity to the training interval. We obtained the weighted ensemble average which reveals smaller errors of the spatial and temporal pattern of wind speed than those of the simple ensemble average.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.420-423
• /
• 2008

This present work is to find optimum design of a NACA65 axial fan blade with weighted average surrogate model. The numerical analysis by Reynolds-average Navier-Stokes equations with shear stress turbulence(SST) is discretized by finite volume approximations and solved on hexahedral grids for flow analysis. The blade aerodynamic shape is modified by six design variables for the optimization. The blade profile as well as stacking line is modified to enhance blade total efficiency. Six design variables, airfoil maximum camber, maximum camber location, leading edge radius, trailing edge radius, lean angle at 50% span and lean angle at 100% span, are selected for blade profile to enhance the total efficiency. The PBA model which is basically weighted average of the basis surrogates is used to find the optimal design in the design space from the constructed response surface model for the objective function. By the optimization, the total efficiency is increased by 1.4%.

• Korean Journal of Materials Research
• /
• v.33 no.2
• /
• pp.54-62
• /
• 2023

The most comprehensive and particularly reliable method for non-destructively measuring the residual stress of the surface layer of metals is the sin²ψ method. When X-rays were used the relationship of ε_φψ-sin²ψ measured on the surface layer of the processing metal did not show linearity when the sin²ψ method was used. In this case, since the effective penetration depth changes according to the changing direction of the incident X-ray, σ_φ becomes a sin²ψ function. Since σ_φ cannot be used as a constant, the relationship in ε_φψ-sin²ψ cannot be linear. Therefore, in this paper, the orthogonal function method according to Warren's diffraction theory and the basic profile of normal distribution were synthesized, and the X-ray diffraction profile was calculated and reviewed when there was a linear strain (stress) gradient on the surface. When there is a strain gradient, the X-ray diffraction profile becomes asymmetric, and as a result, the peak position, the position of half-maximum, and the centroid position show different values. The difference between the peak position and the centroid position appeared more clearly as the strain (stress) gradient became larger, and the basic profile width was smaller. The weighted average strain enables stress analysis when there is a strain (stress) gradient, based on the strain value corresponding to the centroid position of the diffracted X-rays. At the 1/5 I_max max height of X-ray diffraction, the position where the diffracted X-ray is divided into two by drawing a straight line parallel to the background, corresponds approximately to the centroid position.

• Journal of dental hygiene science
• /
• v.24 no.3
• /
• pp.200-207
• /
• 2024

Background: This study aimed to evaluate whether a Novel Plaque Index (NPI) using intraoral camera images would be more useful for assessing the accumulated area of dental plaque compared to three other indices. Methods: This study evaluated 80 disclosed plaque tooth surface images from 40 participants, including the facial surfaces of the maxillary left first molar and mandibular left central incisor. The tooth surface was divided longitudinally into three sections, with each section further subdivided into four subsections. A score ranging from 0 to 5 was assigned to each longitudinal third, and the average score was determined as the NPI score for the tooth surface. Two examiners assessed the NPI, Patient Hygiene Performance Index, Quigley and Hein Plaque Index, and Rustogi's Modified Navy Plaque Index scores obtained using the plaque images. The assessments were repeated twice with a 2-weeks washout period. The Plaque Percent Index (PPI) score calculated via image analysis is considered the gold standard. Results: The NPI showed the highest correlation coefficient with PPI compared to the other indices (examiner 1: 0.87, examiner 2: 0.88). The intraexaminer reliability of the NPI was excellent for both examiners. The intraclass correlation coefficient (ICC) for examiner 1 and 2 was 0.95 and 0.93, respectively. The weighted kappa values were >0.85 for both examiners. The ICC of the interexaminer analysis was 0.93 and the weighted kappa showed a reliability value of 0.81. Conclusion: The NPI was found to have greater validity and reliability than the three existing indices for the quantitative scoring of dental plaque.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.4
• /
• pp.13-25
• /
• 2017

To reconstruct the paleo-temperature quantitatively and to overcome limitation of traditional qualitative pollen analysis, this study was performed pollen analysis using the modern surface soil at Yulha-dong, Gimhae-si of southeastern part of Korean peninsula. Canonical Correspondence Analysis(CCA) was done to identify the most important environment variable about composition of modern surface pollen sample. Also, Weighted Average-Partial Least Square(WA-PLS) was analyzed to obtain modern surface pollen-temperature transfer function. The transfer function was applied to the results of qualitative fossil pollen analysis at Yulha-dong, Gimhae-si, Sampyung-ri, Ulsan-si and Taewha-dong, Ulsan-si. Therefore, the paleo-temperature was reconstructed during the Holocene since 6,200 yr BP. According to the results of the research, it is $1{\sim}2^{\circ}C$ lower than the current average annual temperature at the study area in 6,200 yr BP, since then it increased to the same level to the current temperature and decreased again until 2,600 yr BP. From the 2,600 yr BP, the temperature was fluctuated to the present.

• Journal of Korea Water Resources Association
• /
• v.43 no.5
• /
• pp.471-482
• /
• 2010

Rainfall events in the hydrologic circulation are closely related with various meteorological factors. Therefore, in this research, correlation relationship was analyzed between sea surface temperature of typical meteorological factor and monthly rainfall on Korean peninsula. The cluster analysis was performed monthly average rainfall data, longitude and latitude observed by rainfall observatory in Korea. Results from cluster analysis using monthly rainfall data in South Korea were divided into 4 regions. The principal components of monthly rainfall data were extracted from rainfall stations separated cluster regions. A correlation analysis was performed with extracted principal components and sea surface temperatures. At the results of correlation analysis, positive correlation coefficients were larger than negative correlation coefficients. In addition, The 3 month of principal components on monthly rainfall predicted by locally weighted polynomial regression using observed data of sea surface temperature where biggest correlation coefficients have. The result of forecasting through the locally weighted polynomial regression was revealed differences in accuracy. But, this methods in the research can be analyzed for forecasting about monthly rainfall data. Therefore, continuous research need through hydrological meteorological factors like a sea surface temperature about forecasting of the rainfall events.