• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.115-122
• /
• 1999

A friction tester to measure friction force generated at the interface between the piston ring and the cylinder liner was developed. Modified piston ring is bar-shaped and 100mm long. Surface of the modified piston ring is machined by the profile grinding machine to be formed as a shape of an arc of a circle. Measured data are treated as mean effective friction force and power loss. From this test it can be confirmed that friction force is deeply affected by surface shape of the piston ring and viscosity of supplied oil. Friction force is deeply affected by surface shape of the piston ring and viscosity of supplied oil. Friction force is decreased and power loss is increased with increasing velocity. And it is known that region of mixed lubrication is broader than estimated with theoretical analysis. it is expected that this tester can be used as the optimization tool of the surface shape of the piston ring at the first stage of development of the piston rings.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.176-182
• /
• 1998

The effects of temperature, cooling surface tension on the fining were studied in alkali-alkaline earth-silica TV screen glassmelts containing ZnO. Sodium antimonate $(Na_2OSb_2O_5)$ was used as a fining agent. Viscosity and surface tension of the melts were determined. On the basis of these properties, fining tests for several batches were performed by "MF" (Melting and Fining) and "PMF" (Profiled melting and Fining) methods. The results of these tests showed an opposite behavior each other with increase in ZnO content. This hehavior has been discussed in terms of two fining processes-growth of bubbles and shrinkage of seeds. shrinkage of seeds.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.557-566
• /
• 2011

The surfactants facilitate the formation of foam bubbles under a proper condition and provide stability of foam bubbles by decreasing the surface tension of solutions and increasing the viscosity of foam surface. However, there have been almost no practical data of foam concrete in this regard so far. This study aims to understand the effects of foaming agents such as anionic synthetic surfactant and anionic natural material surfactant on the low density foamed concrete. From the experiment, the vegetable soap of anionic natural material surfactants showed a higher foaming rate, more open pores, slightly lower compressive strength, and a higher permeability coefficient compared to the vegetable soap of anionic synthetic surfactants. It is believed that the natural material surfactants make not only the surface tension of the solution low but also the viscosity of slurry high.

• Transactions of Materials Processing
• /
• v.22 no.4
• /
• pp.223-228
• /
• 2013

The friction coefficients of advanced high strength steel sheets were experimentally determined. In the friction test, the pulling and holding forces acting on the sheet for various friction conditions, such as lubricant viscosity, pulling speed, blank holding pressure, sheet surface roughness, and hardness of the sheet were measured and the friction coefficient was calculated based on Coulomb's friction law. While the friction coefficient, generally, decreases as the value of friction factor increases, the factor associated with the sheet surface roughness shows U shape behavior for the friction coefficient. Furthermore, the relationship between friction coefficient and the wear volume, which was computed for the roughness of both sheet surfaces and the friction area, is linearly proportional.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.737-744
• /
• 2016

The investigation of effects on fouling propensity with various viscosity of feed solutions would be better understanding for forward osmosis (FO) performance since the fouling propensity was directly influenced with solution viscosity. Therefore, this study was focused on the FO fouling with model foultants (humic acid, alginate) by altering solution viscosity with change of ionic strength (I.S) and $Ca^{2+}$ concentrations. In the comparison between humic acid and alginate, as expected, the alginate generally caused more severe fouling (almost 35.8 % of flux reduction) based on the solution characteristics (high viscosity) and fouling patterns (coil and gel layer). However, interesting point to note is that the fouling propensity of alginate was more severe even though it was applied with low viscosity of feed conditions (I.S = 20 mM, $Ca^{2+}=1mM$). This might be due to that crossed linked gel layer of alginate on the FO membrane surface could be best formed in the condition of $Ca^{2+}$ presence and higher I.S, and that is more dominant to fouling propensity than the low viscosity of feed solutions.

• Restorative Dentistry and Endodontics
• /
• v.28 no.3
• /
• pp.209-221
• /
• 2003

The objectiveness of this study was to evaluate whether low-viscosity composite can bond effectively to dentin surface without bonding resin. The low-viscosity composites being 50wt% filler content were made by the inclusion of bonding resin of two self-etching systems(Cleafil SE Bond, Unifil Bond) varied with contents as 0, 10, 20, 30, 40, 50wt%. Exposed dentin surfaces of extracted 3rd molars are used. Dentin bond strengths were measured. The tests were carried out with a micro-shear device placed testing machine at a CHS of 1mm/min after a low-viscosity composite was filled into an iris cut from micro tygon tubing with internal diameter approximately 0.8mm and height of 1.0mm. 1 Flexural strength and modulus was increased with the addition of bonding resin. 2. Micro-shear bond strength to dentin was improved according to content of bonding resin irrespective of applying or not bonding resin in bonding procedure, and that of Clearfil SE Bond groups was higher than Unifil Bond. 3. There were no significant difference whether use of each bonding resin in bonding procedure for S-40, S-50, U-50(p＞0.05). 4. In SEM examination, resin was well infiltrated into dentin after primed with self-etching primer only for S-50 and U-50 in spite of the formation of thinner hybrid layer. Low viscosity composite including some functional monomer may be used as dentin bonding resin without an intermediary bonding agent. It makes a simplified bonding procedure and foresees the possibility of self-adhesive restorative material.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.1
• /
• pp.1-5
• /
• 2003

Physicochemical changes of poloxamer-based gel containing capsaicin analog (N-[3-(3,4-dimethylphenyl)propyl]-4-(2-aminoethoxy)-3-methoxyphenyl acetamide) such as drug content, viscosity and surface tension were investigated during the storage conditions at three different temperatures (25, 40 and $60^{\circ}C$) over 90 days. No noticeable changes of color were observed when stored at 25 and $40^{\circ}C$. However, the color of white poloxamer gels turned yellow during storage at $60^{\circ}C$. The drug contents were unchanged during storage at $25^{\circ}C$ but had tendency to decrease at $40^{\circ}C$. The drug contents were highly decreased over 40-50% when stored at $60^{\circ}C$. The viscosity of a poloxamer-based gel was unchanged during storage at 25 and $40^{\circ}C$ but greatly increased at $60^{\circ}C$. The surface tension of a poloxamer-based gel was not changed at three different temperatures. The storage conditions of a poloxamer-based gel containing capsaicin analog can be considered for further clinical applications.

• Transactions of Materials Processing
• /
• v.24 no.6
• /
• pp.381-386
• /
• 2015

Recently, high-strength-steel sheets have been used extensively for increasing fuel-efficiency and stability in automobiles. A study on the characteristics regarding friction factors is required because high-strength-steel sheets have higher contact pressure at the tool interface as compared to low-strength steel sheets. For the current study, a sheet friction test was used to examine the influence of several factors on friction. The friction tests were performed on two types of sheet steels (SPFC590 and SPFC980) to obtain friction coefficients as a function of contact pressure, surface roughness, lubricant viscosity, and speed. Based on the experimental results for SPFC590 and SPFC980, the friction coefficient decreased with increasing contact pressure, but the friction coefficient increased with increasing surface roughness. Also, the friction coefficient decreased with increasing lubricant viscosity and decreasing speed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.10
• /
• pp.1470-1476
• /
• 2001

Kou Woan Lao is an oriental-style dairy product, which is coagulated by milk-clotting enzyme from the culture filtrate of lao-chao. The product appears smooth, sweet, slightly wine flavour, and the flavour differs from yogurt. The aim of this study was to search for the optimum model to shorten the period of manufacture, and to improve the quality of Kou Woan Lao. A response surface design was used for studying the effects of addition of carrageenan, locust bean gum, and culture filtrate from lao-chao on the curd firmness, viscosity, and syneresis. Results indicated that the best rheological property, preservative quality and acceptability of Kou Woan Lao could be obtained by the combination of 0.22% carrageenan, 0.21 % locust bean gum and 12% culture filtrate from lao-chao. The curd firmness, viscosity and syneresis of resultant product were 29.3 g, 21,347.7 cps, and 8.92%, respectively and the microstructure of the curd revealed a relatively complete three-dimensional spider web-like structure.

• Macromolecular Research
• /
• v.13 no.5
• /
• pp.409-417
• /
• 2005

The surface of rutile titania nanoparticles was chemically modified by reacting with alkoxy silane. The surface and rheological properties in silicone oil having a wide range of viscosity were investigated. Total surface free energy($\gamma_S$) of the titania particles decreased from 53.12 to 26.94 mJ/$m^2$ as the silane used for surface treatment was increased from 0 to 5.0 wt$\%$. The surface free energy of neat silane was 25.5 mJ/$m^2$, which is quite close to that oftitania particles treated with 5.0 wt$\%$ silane. Due to the hydrophobic nature oftreated-titania, the contact angle was accordingly higher for polar solvent in the order of water>ethylene glycol> formamide>$\alpha$-bromonaphthalene. In sum of rheological behavior, as the applied shear stress or viscosity of the silicone oil increased, the titania particles tend to form layers and agglomerated clusters, showing shear-thinning and shear-thickening behaviors, sequentially. A good dispersion of discrete titania particles obeying a Newtonian flow behavior was achieved at a surface energy or low concentration of silane-treated titania particles in hydrophobic silicone oil.