• The korean journal of orthodontics
• /
• v.41 no.1
• /
• pp.6-15
• /
• 2011

Objective: The aim of this study was to evaluate the biomechanical aspects of peri-implant bone upon root contact of orthodontic microimplant. Methods: Axisymmetric finite element modeling scheme was used to analyze the compressive strength of the orthodontic microimplant (Absoanchor SH1312-7, Dentos Inc., Daegu, Korea) placed into inter-radicular bone covered by 1 mm thick cortical bone, with its apical tip contacting adjacent root surface. A stepwise analysis technique was adopted to simulate the response of peri-implant bone. Areas of the bone that were subject to higher stresses than the maximum compressive strength (in case of cancellous bone) or threshold stress of 54.8MPa, which was assumed to impair the physiological remodeling of cortical bone, were removed from the FE mesh in a stepwise manner. For comparison, a control model was analyzed which simulated normal orthodontic force of 5 N at the head of the microimplant. Results: Stresses in cancellous bone were high enough to cause mechanical failure across its entire thickness. Stresses in cortical bone were more likely to cause resorptive bone remodeling than mechanical failure. The overloaded zone, initially located at the lower part of cortical plate, proliferated upward in a positive feedback mode, unaffected by stress redistribution, until the whole thickness was engaged. Conclusions: Stresses induced around a microimplant by root contact may lead to a irreversible loss of microimplant stability.

• IMMUNE NETWORK
• /
• v.3 no.3
• /
• pp.188-200
• /
• 2003

Background: Immunization of dendritic cells (DCs) pulsed with tumor antigen can activate tumor-specific cytotoxic T lymphocytes (CTL) that are responsible for protection and regression. In this study, we examined whether the uptake of necrotic tumor cells could modulate DC phenotypes and whether the immunization of necrotic tumor cell-loaded DCs could elicit efficient tumor specific immune responses followed by a regression of established tumor burdens. Methods: We prepared necrotic tumor cell-pulsed DCs for the therapeutic vaccination and investigated their phenotypic characteristics, the immune responses induced by these DCs, and therapeutic vaccine efficacy against colon carcinoma in vivo. Several parameters including phagocytosis of tumor cells, surface antigen expression, chemokine receptor expression, IL-12 production, and NK as well as CTL activation were assessed to characterize the immune response. Results: DCs derived from mouse bone marrow efficiently phagocytosed necrotic tumor cells and after the uptake, they produced remarkably increased levels of IL-12. A decreased CCR1 and increased CCR7 expression on DCs was also observed after the tumor uptake, suggesting that antigen uptake could induce DC maturation. Furthermore, co-culturing of DCs with NK cells in vitro enhanced IL-12 production in DCs and IFN-${\gamma}$ production in NK cells, which was significantly dependent on IL-12 production and cell-to-cell contact. Immunization of necrotic tumor cell-loaded DCs induced cytotoxic T lymphocytes as well as NK activation, and protected mice against subsequent tumor challenge. In addition, intratumoral or contra-lateral immunization of these DCs not only inhibited the growth of established tumors, but also eradicated tumors in more than 60% of tumor-bearing mice. Conclusion: Our data indicate that production of IL-12, chemokine receptor expression and NK as well as CTL activation may serve as major parameters in assessing the effect of tumor cell-pulsed DC vaccine. Therefore, DCs loaded with necrotic tumor cells offer a rational strategy to treat tumors and eventually lead to prolonged survival.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.957-963
• /
• 1999

Effects of cryoprotectants on protein denaturation of soybean curd, tofu, during frozen storage were examined. A whole-coagulated non-press tofu was prepared by adding 2% of isolated soybean protein to soy milk in order to prevent loss of added cryoprotectants. The cryoprotectants added were glocose, glycerol, sorbitol, propylene glycol, and tripolyphosphate. The texture characteristics of soybean curds before and after frozen storage were measured by sensory evaluation and Texture analyzer, and the results were evaluated by response surface methodology (RSM). Glucose, glycerol, sorbitol, and sodium tripolyphosphate were effective as single cryoprotectant, and the mixtures of glucose and sodium tripolyphosphate, and sorbitol and propylene glycol were also effective in minimizing textural change during freezing. Overall, the mixture of cryoprotectants were more effective than single cryoprotectant. According to the RSM, the maximum effect of cryoprotectants in minimizing textural changes during freezing was obtained with the mixture of 2.1% glucose, 6.7% glycerol, 2.1% sorbitol, 0.4% propylene glycol, and 0.3% sodium tripolyphosphate. However, considering the sensory acceptability, the optimum use of cryoprotectants in frozen tofu was 1% glucose, 2% glycerol, 1% sorbitol, 0.2% propylene glycol, and 0.5% sodium tripolyphosphate.

• Journal of Periodontal and Implant Science
• /
• v.41 no.5
• /
• pp.227-233
• /
• 2011

Purpose: The aim of this study was to compare osteoblast behavior on zirconia and titanium under conditions cultured with bone morphogenetic protein-2. Methods: MC3T3-E1 cells were cultured on sandblasted zirconia and sandblasted/etched titanium discs. At 24 hours after seeding MC3T3-E1, the demineralized bone matrix (DBM) gel alone and the DBM gel with bone morphogenetic protein-2 (BMP-2) were added to the culture medium. The surface topography was examined by confocal laser scanning microscopy. Cellular proliferation was measured at 1, 4, and 7 days after gel loading. Alkaline phosphatase activity was measured at 7 days after gel loading. The mRNA expression of ALPase, bone sialoprotein, type I collagen, runt-related transcription factor 2 (Runx-2), osteocalcin, and osterix were evaluated by real-time polymerase chain reaction at 4 days and 7 days. Results: At 1, 4, and 7 days after loading the DBM gel alone and the DBM gel with BMP-2, cellular proliferation on the zirconia and titanium discs was similar and that of the groups cultured with the DBM gel alone and the DBM gel with BMP-2 was not significantly different, except for titanium with BMP-2 gel. ALPase activity was higher in the cells cultured with BMP-2 than in the other groups, but there was no difference between the zirconia and titanium. In ALPase, bone sialoprotein, osteocalcin, Runx-2 and osterix gene expression, that of cells on zirconia or titanium with BMP-2 gel was much more highly increased than titanium without gel at day 7. The gene expression level of cells cultured on zirconia with BMP-2 was higher than that on titanium with BMP-2 at day 7. Conclusions: The data in this study demonstrate that the osteoblastic cell attachment and proliferation of zirconia were comparable to those of titanium. With the stimulation of BMP-2, zirconia has a more pronounced effect on the proliferation and differentiation of the osteoblastic cells compared with titanium.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.3-11
• /
• 2009

The increased demand and consumption of coal has intensified problems associated with disposal of solid waste generated in utilization of coal. Major utilization of coal by-products has been in construction-related applications. Since fly ash accounts for the part of the production of utility waste, the majority of scientific investigations have focused on its utilization in a multitude of use, while little attention has been directed to the use of bottom ash. As a consequence of this neglect, a large amount of bottom ash has been stockpiled. However, the need to obtain safe and economical solution for its proper utilization has been more urgent. The study presented herein is designed to ascertain the performance characteristics of bottom ash, as autoclaved lightweight foamed concrete product. The laboratory test results indicated that tobermorite was generated when bottom ash was used as materials for hydro-thermal reaction. According to the analysis of variance, at the fresh state, water ratio affects on flow and slurry density of autoclaved lightweight foamed concrete, but foam ratio influences on slurry density, while, at the hardened state, foam ratio affects on the density of dry and the compressive strength but doesn't affect on flexural and tensile strength. In the results of response surface analysis, to obtain target performance, the most suitable mix condition for lightweight foamed concrete using bottom ash was water ratio of 70$\sim$80% and foaming ratio of 90$\sim$100%.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.345-350
• /
• 2007

Phosphosugars are found in all living organisms and are commercially valuable compounds with possible applications in the development of a wide range of specialty chemicals and medicines. In carbohydrate metabolism, fructose 6-phosphate (F6P) is an essential intermediate formed by phosphorylation of 6' position of fructose in glycolysis, gluconeogenesis, pentose phosphate pathway and Calvin cycle. In glycolysis, F6P lies within the glycolysis metabolic pathway and is produced by isomerisation of glucose 6-phosphate. For large-scale production, F6P could be produced from starch using many enzymes such as pullulanase, starch phosphorylase, isomerase and mutase. In enzymatic reactions carried out at high temperatures, the solubility of starch is increased and microbial contamination is minimized. Thus, thermophile-derived enzymes are preferred over mesophile-derived enzymes for industrial applications using starch. Recently, we reported the production of glucose 1-phosphate (G1P) from starch by Thermus caldophilus GK24 enzymes. Here we report the production of F6P from starch through three steps; from starch to glucose 1-phosphate (glucan phosphorylase, GP), then glucose 6-phosphate (phosphoglucomutase, GM) and then F6P (phosphoglucoisomerase, GI). Using 200 L of 1.2% soluble starch solution in potassium phosphate buffer, 1,253 g of G1P were produced. Then, 30% yields of F6P were attained at the optimum reaction conditions of GM : G1 (1 : 2.3), 63.5$^{\circ}C$, and pH 6.85. The optimum conditions were found by response surface methodology and the theoretical values were confirmed by the experiments. The optimum starch concentrations were 20 g/L under the given conditions.

• Journal of Periodontal and Implant Science
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2003

Hydroxyapatite(HA) has been extensively used as bone graft materials and tooth implant surface coating materials because of its biocompatibility and osteoconductive properties. However, as HA is intrinsically poor in mechanical properties, zirconia($ZrO_2$) was incorporated with HA as reinforcing phases for improvement of mechanical properties. The purpose of this study was to investigate the biological activities of HA-coated zirconia through the cell proliferation test, measurements of alkaline phosphatase activity, and histologic examination. Four kinds of tested blocks were prepared according to the pore size (300-500${\mu}m$/500-700${\mu}m$) and the porosity (70%/90%). Cell proliferation and alkaline phosphatase activity was measured at 1, 7, 14 days. The number of cells proliferate after 7, 14 days were significantly increased in all groups when compared with that of the first day, but there was no significant difference between the 4 groups at each time period. At the 7 day, alkaline phosphatase activities of cells cultured in 4 groups were higher than that of the first day, but there was no significant difference between the 4 groups at each time period. The human gingival fibroblast and MG 63 cell was used to evaluate the cell cytotoxicity using MTT test. The materials tested in the current study turned out to be non-cytotoxic. In histologic examination(SEM), at 1 day there were many cells attached on the surfaces of all kinds of tested blocks. The number of cells were increased over time. At the 14 day, there were more cells proliferated than 1 day and some of the pores of blocks were partially filled with the proliferated cells. The in vitro response of osteoblast-like cells to the HA-coated zirconia showed comparable effect on transformation comparable to hydroxyapatite.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.3
• /
• pp.293-306
• /
• 2009

In this study, the biological response of fetal rat calvarial cells on alkali- and heat-treated titanium was assessed. The results were as follows; Cell proliferation on alkali- and heat-treated surfaces showed significantly higher level than on the titanium-6aluminum-4vanadium (weight percentage: 6 % aluminum, 4 % vanadium, Ti-6Al-4V) surface (p<0.01). In ELISA analysis, concentration of $IL-1{\beta}$ and IL-6 were raised when the cells were grown to day 7. Pre-treatment with herbimycin, a known tyrosine kinase inhibitor, suppressed the production of IL-6 (p<0.01). In comparison to commercially pure titanium (grade II, cp-Ti) and Ti-6Al-4V alloy, alkali- and heat-treated titanium enhanced alkaline phosphatase activity (p<0.001). In RT-PCR analysis, alkaline phosphatase, bone sialoprotein, receptor activated nuclear factor ligand mRNA expression was increased alkali- and heat-treated titanium. Herbimycin and SB203580, p38 MAPK inhibitor, were repressed of $IL-1{\beta}-induced$ IL-6 mRNA expression. These results suggest that alkali- and heat-treated titanium stimulate osteoblasts differentiation and facilitate bone remodeling.

• Journal of Periodontal and Implant Science
• /
• v.26 no.4
• /
• pp.907-931
• /
• 1996

The purpose of this study was to study of the effects of the bioglass and the natural coral on healing process of the alveolar bone defects. Three adult dogs aged 1 to 2 years were used in this study. Experimental alveolar bone defects were created surgically with surgical bur and bone chisel at the furcation area of the buccal surface of the right and left mandibular 3rd, 4th premolars. Twelve experimental alveolar bone defects were devided into four groups according to the type of graft materials. The groups were as follows : 1. flap operation with root planing & curettage(Negative control group) 2. flap operation with autogenous bone(Positive control group) 3. flap operation with bioglass(BG group) 4. flap operation with natural coral(NC group) At 2, 4, and 8 weeks, the dogs were serially sacrificed and specimens were prepared with Hematoxylin-Eosin stain for light microscopic evaluation. The results of this study were as follows : 1. The defect areas were filled with granulation tissue at two weeks in negative control group. But in other groups, the appearance of connective tissues around graft materials were formed more densely and the response of inflammation by graft materials itself was not found. 2. In every control and experimental groups at two weeks, there was seen the accumulation of the formation of new bone trabeculae at the bottom of defects and gradually expanded toward the graft materials and in autogenous group there was slightly seen the formation of new cementum. 3. There was seen the erosion of central portion of bioglass particles at two weeks in BG group, and the erosion of the central portion was developed more progressively and was filled with bone-like tissues at eight weeks. 4. The natural coral particles were encapsulated by densely connective tissues and seen the formation of new bone tissues at four weeks and developed more new bone and cementum formation at eight weeks. From the results of this study, the bioglass and the natural coral may be biocompatible and have a weak adverse reaction to the periodontal tissues.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.729-736
• /
• 2011

The technique for order preference by similarity to ideal solution (TOPSIS) is regarded as a classical method of multiple attribute decision making (MADM), often used to solve various decision-making or selection problems. It is based on the concept that the chosen alternative should have the shortest distance from the positive ideal solution and the farthest distance from the negative ideal solution. The TOPSIS can be applied to a design process for carrying out multi-objective shape optimization wherein the best and worst alternatives are to be decided. In this paper, multi-objective shape optimization using the TOPSIS and Rational Bezier curve was applied to the funnel of a cathode-ray tube (CRT). In order to minimize the weight and first principal stress, a new multi-objective shape optimization methodology is proposed, wherein the relative-closeness coefficients of the TOPSIS are defined as the performance indices of a multi-objective function and evaluated by response surface models. This methodology enables the designer to decide on the best solution from a number of design specification groups by examining the various conflicts between the weight and the first principal stress.