• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.135-140
• /
• 2005

항만과 해역에 설치되는 수직벽의 일례로 육상 및 유입되는 오염수의 오염 유출 방지를 위한 차수기능을 갖는 차수벽과 교량이나 댐, 갑문 둥의 하천 또는 해양구조물을 축조하는 동안 물이 들어오는 것을 방지하기 위하여 임시로 설치되는 가물막이(cofferdam)벽 등이 있다 이들 차단벽의 구조역학적인 설계 인자 중 유입수 유동 특성과 설치 지역의 지반 특성이 중요한 의미를 가진다고 판단된다. 본 연구에서는 이러한 수직 차단벽 주위의 유체역학적 특성 파악의 일례로 수직벽의 하단에 틈새를 갖는 파공(perforation)이 발생하였을 때 이들 파공의 개도율 변화에 따른 유동특성을 고찰하는 하나의 방안으로 입자영상유속계(Particle Image Velocimetry)를 이용하여 수직벽 후류 특성을 실험적으로 고찰하였다.

• 대한기계학회논문집B
• /
• 제23권10호
• /
• pp.1265-1273
• /
• 1999

PIV(Particle Image Velocimetry) velocity field measurements inside the snout of a1/10 scale model of the Zn plating process were carried out at the strip speed $V_s=1.5m/s$. Aluminum powder particles ($1{\mu}m$) and atomized olive oil ($3{\mu}m$) were used as seeding particles to simulate the molten Zinc flow and deoxidization gas flow, respectively. A pulsed Nd:Yag laser and a $2K{\times}2K$ high-resolution CCD camera were synchronized for the PIV velocity field measurement. From flow visualization study, it is found that the liquid flow in the Zn pot is dominantly governed by the uprising flow caused by the rotating sink roll, with its effect on the steel strip inside the snout largely diminished by installing of the snout. The deoxidization gas flow in front of the strip inside the snout can be characterized by a large-scale vortex rotating clockwise direction formed by the moving strip. In the rear side of the strip, a counter-clockwise vortex is formed and some of the flow entrained by the moving strip impinges on the free surface of molten zinc. The liquid flow in front of the strip is governed by the flow entering the snout, caused by the spinning sink roll. Just below the free surface a counter-clockwise vortex is formed near the snout wall. The moving strip affects dominantly the flow behind the strip inside the snout, and large amount of the liquid flow follows the moving strip toward the sink roll. The thickness of the flow following the strip is very thin in the front side due to the uprising flow, however thick boundary layer is formed in the rear side of the strip. Its thickness is increased as moving downstream toward the sink roll. Inside the snout, the deoxidization gas flow above the free surface is much faster than the liquid flow in the zinc pot. Due to the larger influx of the flow following the moving strip in the rear side of the strip, higher percentage of imperfection can be anticipated on the rear surface of the strip.

• 한국항해항만학회지
• /
• 제34권6호
• /
• pp.429-434
• /
• 2010

해양의 다양한 환경에 노출된 선체 표면의 거칠기를 일반화 하여 모델 실험을 PIV기법을 적용하여 회류수조에서 수행하였다. 모델의 유동방향 표면 거칠기의 폭에 기초하여 본 연구에 적용된 레이놀즈수 Re=1.0$\times$103에서 유동가시화, 시간평균 속도장 및 와도장을 상호 평가를 통하여 유동특성을 조사하였다. 와의 생성과 소멸 메커니즘을 통해 와류의 중심은 표면 거칠기 높이의 0.5H로 나타났다. 또한 거칠기 계수가 증가함에 따라 와의 크기와 비례하고, 와의 생성위치도 상부와 전방으로 이동하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1512-1517
• /
• 2005

과학기술의 발달과 함께 컴퓨터의 성능 개선 및 통신기술의 급진전으로 인하여 관측된 수문자료의 안정적 전송과 다양한 표출 및 무한한 저장 등에 관한 관심과 투자 등의 노력에 비하여 상대적으로 모든 수자원 업무의 기초가 되는 수문관측 및 자료관리에 대한 노력은 심히 부족한 것이 우리나라의 실정이다. 특히 수자원 관련 기술의 발달은 매년 놀라울 만큼 빠르게 선진국을 따라 잡고 있는 것이 사실이나, 유독 이를 뒷받침하는 수자원 기초자료 중 가장 중요한 유량자료를 산정하기 위한 하천의 유속측정 방법에 대한 연구는 거의 전무한 것이 현실이다. 따라서 본 연구에서는 1999년도에 수자원연구원에서 홍수시 유속측정을 위하여 개발한 전자파표면유속계를 선진국의 최신 유량측정기법과 정확도를 비교하여 전자파표면유속계의 활용성을 검증하였다. 이를 위해 현장에서 유량측정을 위하여 LSPIV unit을 설계 및 구축하였으며, 동일지점에서 전자파표면유속계로 기록된 결과와 비교하였다.

• 한국방재학회 논문집
• /
• 제5권1호
• /
• pp.63-68
• /
• 2005

영상 해석을 이용한 유속 측정 방법인 LSIV를 합류점의 수리 모형 실험에 적용하였다. LSIV에 의해 측정된 표면 유속은 유속계에 의해 측정된 평균 유속과 상당히 유사한 결과를 나타내었다. 일반적인 유속계는 순간적인 지점 유속만을 나타내기 때문에 전체적인 유속장을 살피는 데 어려움이 있으나, LSIV는 전체적인 흐름장의 양상을 한 눈에 살펴 볼 수 있는 좋은 도구이다. 특히 합류점이나 교각 주변부와 같이 흐름이 국부적으로 변화가 심한 경우 LSIV는 적절한 실험 도구가 될 수 있을 것이다.

• Steel and Composite Structures
• /
• 제32권5호
• /
• pp.559-569
• /
• 2019

The bond strength between composite laminates and concrete is a key factor that controls the behavior of concrete members strengthened with fiber reinforced polymer (FRP) sheets, which can be affected by several parameters such as thermal stresses and surface preparation. This article presents the result of an experimental study on the bond strength between FRP sheets and concrete at ambient temperature after specimens had been exposed to elevated temperatures of up to $200^{\circ}C$. For this purpose, 30 specimens of plain concrete with dimensions of $150{\times}150{\times}350mm$ were prepared. Three different conventional surface preparation methods (sandblasting, wire brushing and hole drilling) were considered and compared with a new efficient method (fiber implantation). Deformation field during each experiment was monitored using particle image velocimetry. The results showed that, the specimens which were prepared by conventional surface preparation methods, preserved their bond integrity when exposed to temperature below glass transition temperature of epoxy resin (about $60^{\circ}C$). Beyond this temperature, the bond strength and stiffness decreased significantly (about 50%) in comparison with control specimens. However, the specimens prepared by the proposed method displayed higher bond strengths of up to 32% and 90% at $25^{\circ}C$ and $200^{\circ}C$, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.930-937
• /
• 2011

The characteristics of mean velocity and turbulence have been analyzed in the circular open channel flow using PIV measurement data for a wide range of water depth. The measured data are fitted to a velocity distribution function over the whole depth of the open channel. Reynolds shear stress and mean velocity in wall unit are compared with the analytic models for fully-developed turbulent boundary layer. Both the mean velocity and Reynolds shear stress have different distributions from the two-dimensional boundary layer flow when the water depth increases over 50% since the influence of the side wall penetrates more deeply into the free surface. The cross-stream Reynolds normal stress also has considerably different distribution in view of its peak value and decreasing rate in the outer region whether the water depth is higher than 50% or not.

• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.17-25
• /
• 2003

Velocity field behind a container ship model with a rotating propeller has been investigated using PIV (particle image velocimetry) system. Four hundred instantaneous velocity fields were measured at 4 different blade phases and ensemble-averaged to investigate the spatial evolution of vortical structure of near wake within one propeller diameter downstream. The phase-averaged mean velocity fields show the potential wake and the viscous wake formed due to the boundary layers developed on the blade surfaces. The interaction between bilge vortex developed along the hull surface and the tangential velocity component of incoming flow causes to have asymmetric flow structure in the transverse plane.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.671-674
• /
• 2008

We investigate the slippage effect in a micro-channel depending on the surface characteristics; hydrophilic, hydrophobic, and super-hydrophobic wettabilities. The micro-scale grooves are fabricated on the vertical wall to make the super-hydrophobic surfaces, which enable us visualize the flow fields near walls and directly measure the slip length. Velocity profiles are measured using micro-particle image velocimetry (Micro-PIV) and compared those in the hydrophilic glass, hydrophobic PDMS, and super-hydrophobic PDMS micro-channels. To directly measure the velocity in the super-hydrophobic micro-channel, the transverse groove structures are fabricated on the vertical wall in the micro-channel. The velocity profile near the wall shows larger slip length and, if the groove structure is high and wide, the liquid meniscus forms curves into the valley so that the wavy flow is created after the grooves.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.115-123
• /
• 2003

Simultaneous measurements of velocity and OH distribution were made using particle image velocimetry(PIV) and planar laser-induced fluorescence(PLIF) of OH radical in turbulent hydrogen nonpremixed flames with coaxial air. The OH radical was used as an approximate indicator of chemical reaction zone. The OH layer was correlated well with the stoichiometric velocity, $U_s$, instantaneously and on average. In addition, high strain-rate regions almost coincide with the OH distribution. The residence time in flame surface, calculated from the root-mean-square value of the radial velocity, is proportional to $(x/d_F)^{0.7}$. It is found that the mean value of principal strain rate on the OH layer can be scaled with $(x/d_F)^{-0.7}$ and therefore, the product of the residence time and the mean strain rate remains constant over all axial positions.