• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.110-110
• /
• 2015

표면에너지는 계면특성을 지배하는 핵심인자로 디스플레이의 터치 스크린 패널 공정, 이종소재의 접합, 금속의 클래딩 등 실제 산업에 있어서 매우 중요하다. 표면에너지는 코팅과 본딩 이론에 있어서 기본이 되는 물리량으로 표면에너지가 높을수록 코팅 또는 박막 증착시 코팅, 증착이 용이하며 이종소재의 접합도 쉽게 일어난다. 본 연구에서는 플라즈마 표면처리시 산소 분율의 변화에 따른 기판의 표면에너지와 코팅층과 기판의 부착력의 변화에 대해 연구하였다. 연구의 주요 기판으로 ITO, PET 기판을 사용하였고, 표면 에너지 변화를 확인하기 위해 기판을 상온 상압 플라즈마에 노출시켰다. 플라즈마는 아르곤(Ar)의 공급량을 20 LPM으로 고정하고 산소($O_2$)의 공급량을 0 sccm에서 40 sccm 까지 10 sccm 간격으로 변수를 주었다. 표면에너지 값은 기판 위에 형성된 액체의 접촉각을 통해 도출하였다. 표면에너지 측정 액체로 증류수(deionized water)와 디오도메탄(diiodo-methane)을 사용하였다. 표면에너지는 산소분압이 10 sccm에서 최대값인 76 mJ/m2으로 증가한 후 20 sccm까지 유지하다 다시 직선적으로 감소하였다. 기판에 증착된 크롬 박막의 부착력은 스크래치 테스트를 통해 측정하였다. 표면에너지의 증가와 비례하게 부착력은 증가하였고 표면에너지가 감소하는 범위에서는 부착력도 감소하였다. 기판과 코팅층의 부착력 증가 원인 중 하나인 계면 산화물 층의 생성 여부를 알아보기 위해 auger electron spectroscopy (AES) 분석을 진행하였다. AES 분석을 통해 플라즈마 표면처리시 기판과 코팅층의 계면 산화물층의 두께가 표면에너지의 변화와 비례하게 증가하였다가 감소하는 것을 확인하였다. 산소분압이 10 sccm 이었을 경우 산화물층의 두께가 가장 두꺼웠다. 또한 계면의 화학적 결합 상태를 알아보기 위해 X-ray photoelectron spectroscopy (XPS) 분석을 진행하였으며 산소 분율의 변화에 따라 크롬 산화물의 양이 증가하였다 감소하는것을 확인하였다. 이 연구를 통해 산소를 포함한 플라즈마 표면개질이 기판과 코팅층의 부착력 증가에 영향을 끼침을 확인 할 수 있었다. 또한 이를 응용하여 부착력 증가가 필요한 다양한 분야에서도 쉽게 적용시킬 수 있을 것이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.17.1-17.6
• /
• 2016

Background: The aim of this study is to verify the feasibility of using silk fibroin (SF) as a potential membrane for guided bone regeneration (GBR). Methods: Various cellular responses (i.e., cell attachment, viability, and proliferation) of osteoblast-like MG63 cells cultured on an SF membrane were quantified. After culturing on an SF membrane for 1, 5, and 7 days, the attachment and surface morphology of MG63 cells were examined by optical and scanning electron microscopy (SEM), cell viability was determined using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and cell proliferation was quantified using 4',6-diamidino-2-phenylindole (DAPI) fluorescence staining. Results: Optical microscopy revealed that MG63 cells cultured on the SF membrane proliferated over the 7-day observation period. The viability of cells cultured on SF membranes (SF group) and on control surfaces (control group) increased over time (P < 0.05); however, at respective time points, cell viability was not significantly different between the two groups (P > 0.05). In contrast, cell proliferation was significantly higher in the SF membrane group than in the control group at 7 days (P < 0.05). Conclusions: These results suggest that silk fibroin is a biocompatible material that could be used as a suitable alternative barrier membrane for GBR.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.223-231
• /
• 2010

The serious issue of tall building is to ensure the fire-resistance of high strength concrete. The fire resistant finishing method is necessarily essential in order to satisfy the fire resistance time of 3 h required by the law. The fire resistant finishing method is installed by applying a fire resistant material as a method of shotcrete or a fire resistant board to high strength concrete surface. This method can reduce the temperature increase of the reinforcement embedded in high strength concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of inorganic alumino-silicate compounds including the inorganic admixture such as fly ash and meta-kaolin as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. The study results show that the fire resistant finishing material composed of fly ash and meta-kaolin has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Inorganic compounds composed of fly ash and meta-kaolin is evaluated to be very effective as the fire resistance material for finishing to protect the concrete substrate by the reason of those simplicity in both application and manufacture. The additional study about the adhesion in the interface with concrete substrate is necessary for the purpose of the practical application.

• Journal of Periodontal and Implant Science
• /
• 제38권4호
• /
• pp.639-644
• /
• 2008

Purpose: The aim of this study was to compare the number of live and dead bacteria attached to, or within, the stratified squamous epithelium lining the tissue side of the gingival sulcus. Materials and Methods: A total of 50 patients was examined and classified into healthy or diseased sites according to inflammatory status of the gingival tissue. The surface of stratified squamous epithelium was removed by gentle scraping of the gingival sulcus with curettes. The cells were processed in the laboratory by density-gradient centrifugation to separate the epithelial cells from the loose bacteria and debris. The LIVE/$DEAD^{(R)}$ $BacLight^{TM}$ Bacterial Viability Kit was applied and the specimens were observed by an epifluorescent microscope and the number of bacteria was counted. Results: Live and dead bacteria were stained to green and red, irrespectively. Generally, the number of total bacteria in the diseased sites was significantly higher than in the healthy sites. The mean number of detected bacteria in the diseased sites was $58.6{\pm}36.0$ (red bacteria $10.4{\pm}9.2$ / green bacteria $48.2{\pm}30.5$), while it was $1.5{\pm}1.7$ in the healthy sites (red bacteria $0.1{\pm}0.3$ / green bacteria $1.4{\pm}1.5$). The percentage of red bacteria was $17.5{\pm}11.2%$ in the diseased sites and $2.0{\pm}5.8%$ in the healthy sites. Conclusion: The total number of bacteria in the diseased sites was significantly higher than that of the healthy sites. The ratio and the number of red bacteria were also significantly higher in the diseased sites.

• 공업화학
• /
• 제17권4호
• /
• pp.397-402
• /
• 2006

TFT-LCD TV용 백라이트 유니트(BLU)의 각 구성성분이 최종 광확산필름의 물리적, 전기적, 열적, 광학적 특성에 미치는 영향에 관하여 고찰하였다. 블로킹 방지층에 있어서는 $6{\mu}m$의 아크릴 비드를 0.5~1.5 wt%로 첨가했을 때 블로킹 방지성이 우수하였고, 4급 암모니움 염을 0.8 wt%로 첨가하였을 경우 Decay-Time 및 수분에 대한 안정성이 가장 우수한 결과를 나타내었다. 광확산층에 있어서는 아크릴 폴리올을 바인더 수지로서 사용하고, 무황변 타입의 HDI계 경화제를 바인더 수지에 대해 30~35 wt%로 첨가하였을 경우가 PET 필름 표면상에의 접착력, 경화속도 및 유연성 측면에서 가장 우수한 결과를 보였다. 또한 $20{\mu}m$의 다분산형 폴리스티렌($20{\mu}m$ PS) 및 폴리메틸메타크릴레이트($20{\mu}m$ PMMA) 비드를 바인더 수지 대비 250 wt%로 첨가하였을 경우에 가장 높은 법선휘도값을 얻을 수 있었으며, PS 입자를 사용했을 경우보다는 PMMA 입자를 사용했을 경우가 투과율 차이로 인해 더 높은 법선휘도값을 나타내었다.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.32-38
• /
• 2011

Galvanized steel has gone through a chemical process to keep it from corroding. The steel gets coated in layers of zinc because rust will not attack this protective metal. For countless outdoor, marine, or industrial applications, galvanized steel is an essential fabrication component. The reduction of the corrosion rate of zinc is an important topic. In the past, a very popular way to reduce the corrosion rate of zinc was to use chemical conversion layers based on $Cr^{+6}$. However, a significant problem that has arisen is that the use of chromium salts is now restricted because of environmental protection legislation. Therefore, it is very important to develop new zinc surface treatments that are environmentally friendly to improve the corrosion resistance of zinc and adhesion with a final organic protective layer. In this study, a Urethane solution (only Urethane 20 wt.%; S-700) and an organic/inorganic solution with Si (Si polysilicate 10 wt.% + Urethane 10 wt.%; LRO-317) are used. Based on the salt spray test of 72 h, S-700 and LRO-317 had a superior effect for the corrosion resistance on EGI and HDGI, respectively.

• 태양에너지
• /
• 제17권2호
• /
• pp.55-66
• /
• 1997

CdTe/CdS 태양전지 제작에 필요한 다결정 CdS 박막을 ITO 전도 유리기판위에 SSD법, SPD법 및 CBD법 으로 제작하고 열처리 한 후 그 결정구조와 광학적 특성을 조사하였다. 박막은 모두 Wurtzite 구조를 보였고 SSD법과 CBD법의 박막은 $0.5{\mu}m$ 크기의 CdS 입자가 불규칙적으로 형성되어 증착되어 있음을 보였고, $400^{\circ}C$로 진공중에서 열처리 할 때 입자의 크기가 약간 증가하였다. SPD법의 박막은 (002)방향으로 결정이 성장되고 입자의 크기가 $0.1-0.3{\mu}m$ 이었다. 에너지 밴드갭 및 결함 상태를 광학적 흡수, 광 루미니센스, 라만 및 광 열 편기 스펙트럼(PDS) 측정을 통해 조사하였다.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.1-8
• /
• 2014

PURPOSES : The objective of this study is to evaluate the bond strength of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals using the bitumen bond strength (BBS) test. METHODS : For the laboratory testing, the Pneumatic Adhesion tensile Testing Instrument(PATTI) device is used to measure the bond strength between the asphalt emulsion and aggregate substrate based on the AASHTO TP-91. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymer-modified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions and one of unmodified emulsion, the CSS-1H, are employed. For chip seal study, the BBS tests are performed at 30, 60, 120, and 240 minutes of curing times with curing and testing temperatures of $15^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$. The fog seal tests are conducted at 30, 60, 90, 120, 180 minutes, and 24 hours with curing and testing temperatures of $25^{\circ}C$, $30^{\circ}C$, and $35^{\circ}C$. RESULTS AND CONCLUSIONS : Overall, chip seal emulsions and fog seal emulsions show the similar bond strength trend. At the same testing condition, polymer-modified emulsions show better bond strength than unmodified emulsions. Also, there is no significant difference between polymer-modified emulsions. One of important findings is that the most bond strength reaches their final bond strength within one hour of curing time. Therefore, the early curing time plays a vital role in the performance of chip seals and fog seals.

• 대한기계학회논문집B
• /
• 제37권5호
• /
• pp.489-494
• /
• 2013

본 연구는 주기적인 강제 진동이 가해지는 액적의 모드 특성을 실험적으로 이해하는 것을 목적으로 하고 있다. 액적의 공진 주파수 예측을 수행하여 이론 및 실험적 해석을 통해 두 접근방법의 타당성을 파악하였으며, 초고속카메라를 사용하여 액적의 다양한 변형 특성-모드 형상, 분리, 미소 액적의 발생, 그리고 비틀림의 특성을 관찰하였다. 이론 해석 및 실험결과와의 비교에 있어 공진 주파수 값의 차이가 약 15% 이하라는 것이 도출되었으며 이러한 차이의 발생 원인으로 접촉선 마찰, 비선형벽 고착, 실험의 불확실성 등에 큰 영향을 받는 것으로 판단된다. 접촉선이 고정되어있을 경우와 작은 진폭 조건 하에서 액적의 모양은 대칭형상을 가졌으며, 공진 주파수에서의 로브의 크기는 주변부 주파수에서의 로브 크기보다 더 크게 된다는 점을 확인하였다.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.180-186
• /
• 2002

Hot Plate is the major unit that it used to remove damp of wafer surface, to strength adhesion of photoresist (PR) and to bake coated PR in FAB process of semiconductor. The badness of Hot Plate (HP) has directly influence upon the performance of wafer, it is necessary to guarantee the performance of HP. In this study, a reliability evaluation system has been designed and developed, which is to measure and to estimate thermal uniformity and flatness of HP in range of temperature 0~$250^\circC$. This system has included the techniques which measures and analyzes thermal uniformity using infrared thermal vision, and which compensates measuring error of flatness using laser displacement sensor For measuring flatness, a measurement stage of 3 axes are developed which adapts the precision encoder. The allowable error of this system in respect of thermal uniformity is less $than\pm0.1^\circC$ and in respect of flatness is less $than\pm$1mm . It is expected that the developed system can measure from $\Phi200mm\;(wafer 8＂)\;to\;\Phi300mm$ (wafer 12＂) and also can be used in performance test of the Cool Plate and industrial heater, etc.