• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.4
• /
• pp.57-64
• /
• 2008

This paper presents the real condition and problems of rural communities, shift of social paradigm, and also discussed the results and efforts of existing energy supporting policy by literature review. The aim of this study is to suggest the new supporting policy of energy saving facilities for rural communities, and to show its necessity, framework, promotion method, and connection plan with existing policy. Based on this study, mainly three results can be drawn as follows; first, this new policy is required that not only suggestive reason such as energy crisis and social atmosphere, but also, financial support and welfare service for resident of rural area. Second, the various rural facilities including residence must be planed sustainable energy saving system by this new policy. And the third, this policy should be simultaneously adopted with rural development policy, and must drive forward that is closely connected with a related policy.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.11
• /
• pp.1183-1191
• /
• 2001

The metallorganic chemical vapor deposition (MOCVD) method has been used to prepare TiO2 thin films for the degradation of hazardous organic compounds, such as 2-chlorophenol (2-CP). The effect of supporting materials and metal doping on the photocatalytic activity of TiO2 thin films also has been studied. TiO2 thin films were coated onto various supporting materials, including stainless steel cloth(SS), quartz glass tube (QGT), and silica gel (SG). Transition metals, such as Pd(II), Pt(IV), Nd(III) and Fe(III), were doped onto TiO2 thin film. The results indicate that Nd(Ⅲ) doping improves the photodegradation of 2-CP. Among all supporting materials studied, SS(37 ${\mu}m)$ appears to be the best support. An optimal amount of doping material at 1.0 percent (w/w) of TiO2-substrate thin film gives the best photodegration of 2-CP.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.6
• /
• pp.559-564
• /
• 2001

A method for calculating the main characteristics of a potentiometric titration curve in a carboxylic ion exchanger has been investigated. The potentiometric titration curves of simple electrolyte and ion exchangers (polyelectrolytes) showed a great difference between them. The acidity parameters of the ion exchangers, the thermodynamic constant (pK0), apparent equilibrium constant (K), and correction for the apparent equilibrium constant (b), were introduced and used to express the characteristics of the carboxylic ion exchanger. A characteristic equation related to the acidity parameters of the ion exchangers systems was derived. A fibrous carboxylic cation exchanger was used and potentiometric titration curves at different concentrations of the supporting electrolyte were obtained . To prove the validity of the characteristic equation, the concentration of the supporting electroyte was varied. In the present study, good agreement between the data points and the fitted curves was found in all the cases. The g (number of moles of alkali to 1 g of ion exchanger) of carboxylic ion exchanger was calculated from the concentration of supporting electrolyte (C), pH of the solution, and degree of neutralization of ion exchanger (x).

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.33-39
• /
• 2000

This paper designed the electronic billing system for implementation web site of the social welfare and help-line. And, it possible to the various supporting method between supporter and receiver on the cyberspace. Also, this system is modified to electronic supporting system from the electronic billing system of EC(Electronic Commercial). The electronic billing system is more security and efficiencial billing system than the conventional off-line system.

• Journal of Korean Library and Information Science Society
• /
• v.42 no.4
• /
• pp.223-241
• /
• 2011

The purpose of this study is to propose supporting small libraries through investigating the ordinances of local governments. Based upon identifying of ordinances, there are direct and indirect supports for small libraries from local governments. Direct support is provide budget to small libraries and indirect supports are a cooperation between public library and small library, instruction for library staff, and supporting volunteers. Supporting methods for public small library are direct and indirect supports, but method for private library is indirect support.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.93-101
• /
• 2007

The purpose of this study is to evaluate the effect of three different oblique mechanical loading to occlusal surfaces of posterior implant partial dentures on the stress distributions in surrounding bone, using 3-dimensional finite element method. A 3-dimensional finite element model of a posterior implant partial dentures composed of three unit implants, simplified 3 gold alloy crown and supporting bone was developed according to the design of AVANA self tapping implant for this study. Three kinds of surface distributed oblique loads(300 N) are applied to following occlusal surfaces in the three crowns; 1) All occlusal surfaces in the three crown(load of 300 N was shared to three crown), 2) Occlusal surface of centered crown (load of 300 N was applied to a centered crown), 3) Occlusal surface of proximal crown(load of 300 N was applied to a distal proximal crown). In the results, 141 MPa of maximum von Mises stress was calculated at third loading condition and 98 MPa of minimum von Mises stress was calculated at first loading condition. From the results, location and type of occlusive loading conditions are important for the safety of supporting bone.

• Structural Engineering and Mechanics
• /
• v.50 no.6
• /
• pp.797-816
• /
• 2014

Cooling tower is analyzed as an assembly of layered nonlinear shell elements. Geometric representation of the shell is enabled through layered nonlinear shell elements to define the different layers of reinforcements and concrete by considering the material nonlinearity of each layer for the cooling tower shell. Modal analysis using Ritz vector analysis and nonlinear time history analysis by direct integration method have been carried out to study the effects of the inclination of the supporting columns of the cooling tower shell on its dynamic characteristics. The cooling tower is supported by I-type columns and ${\Lambda}$-type columns supports having the different inclination angles. Relevant comparisons of the dynamic response of the structural system at the base level (at the junction of the column and shell), throat level and at the top of the tower have been made. Dynamic response of the cooling tower is found to be significantly sensitive to the change of the inclination of the supporting columns. It is also found that the stiffness of the structure system increases with increase in inclination angle of the supporting columns, resulting in decrease of the period of the structural system. The participation of the stiffness of the tower in structural response of the cooling tower is fund to be dependent of the change in the inclination angle and even in the types of the supporting columns.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.391-401
• /
• 2020

The objective of this study is to prioritize the Total Quality Management (TQM) factors based on fuzzy Analytical Hierarchy Process (AHP) method in Vietnamese supporting industries. Through an in-depth literature review, eight criteria were identified. These criteria were then divided into 32 sub-criteria. The fuzzy AHP is used to determine the percent weightings of eight categories of performance criteria that were identified via a review of the quality-management literature. These criteria include management commitment, role of the quality department, training and education, continuous improvement, quality policies, quality data and reporting, communication to improve quality, and customer satisfaction orientation. An empirical analysis of the criteria of each stage using the fuzzy AHP methodology and the expert opinion of quality management are used to evaluate the percent weightings of the criteria and sub-criteria that are synonymous with TQM implementation. The results showed that management commitment is the most critical factor; among sub-criteria, supports and responsibilities of top management is the most important. The study also identified the rank order of critical success factors of TQM. The findings suggest a generic hierarchy model for organizations to prioritize the critical factors and formulate strategies for implementing TQM in supporting industries, as well as other industries in Vietnam.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.601-607
• /
• 2003

The column type is used as the sensing element of the load cell to measure the large force in the range of 10$^4$~ 10$^{7}$ N. However. it is not easy to handle the load with large capacity due to its size. It is, therefore, necessary to design a compact load cell with a low aspect ratio. Thus this paper showed the characteristic evaluation of compact load cell with respect to the shape of supporting plate. The supporting plate of the load cell was an annular type with inner(D$_{i}$) and outer(D$_{o}$) diameters. Using the strain distribution obtained from FEM. the supporting plate was designed to get the stable output voltage of the load cell. The three designed supporting plates were manufactured, and the result of characteristic experiment of the load cell, using the 10 MN hydraulic force standard machine, was compared with FEM.M.M.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.115-120
• /
• 2015

Purpose: The purpose of this study is a finite element analysis of supporting bone according to custom abutment angle. Methods: Implant fixture was selected with a diameter of 4 mm and the length of 13 mm. The fixture and abutment was designed by a combination of the abutment screw clamping force to produce a custom abutment model of $0^{\circ}$, $15^{\circ}$, $25^{\circ}$ and $35^{\circ}$. The loading condition of 176 N was applied to the lingual surface of the crown, near to the incisor edge, and horizontal load. An oblique load of $90^{\circ}$ was applied long axis of the implant fixture analyze the stress of supporting bone. Results: The result of mechanical analysis was observed that the supporting bone stress analysis of the horizontal load, the von Mises stress values (MPa) are given in the order of TH00 (432.6) > TH25 (418.0) > TH15 (417.4) > TH35 (415.8), the oblique load, the von Mises stress values are given in the order of TO00 (459.3) > TO15 (399.6) > TO25 (374.8) > TO35 (343.4) Conclusion: The $35^{\circ}$ abutment over the current clinical tolerance limits will be available for clinical application.