• Ocean Systems Engineering
• /
• v.5 no.3
• /
• pp.181-198
• /
• 2015

An OSV (Offshore Support Vessel) is being used to install a structure which is laid on its deck or an adjacent transport barge by lifting off the structure with its own crane, lifting in the air, crossing splash zone, deeply submerging, and lastly landing it. There are some major considerations during these operations. Especially, when lifting off the structure, if operating conditions such as ocean environmental loads and lifting off velocity are not suitable, the collision can be occurred due to the relative motion between the structure and the OSV or the transport barge. To solve this problem, this study performs the physics-based simulation of the lifting off step while the OSV installs the structure. The simulation includes the calculation of dynamic responses of the OSV and the structure, including the collision detection between the transport barge and the structure. To check the applicability of the physics-based simulation, it is applied to a problem of the lifting off step by varying the ocean environmental loads and the lifting off velocity. As a result, it is confirmed that the operability of the lifting off step are affected by the conditions.

• Earthquakes and Structures
• /
• v.18 no.2
• /
• pp.163-170
• /
• 2020

Floor acceleration plays a major role in the seismic design of nonstructural components and equipment supported by structures. Large floor acceleration may cause structural damage to or even collapse of buildings. For precision instruments in high-tech factories, even small floor accelerations can cause considerable damage in this study. Six P-wave parameters, namely the peak measurement of acceleration, peak measurement of velocity, peak measurement of displacement, effective predominant period, integral of squared velocity, and cumulative absolute velocity, were estimated from the first 3 s of a vertical ground acceleration time history. Subsequently, a new predictive algorithm was developed, which utilizes the aforementioned parameters with the floor height and fundamental period of the structure as the new inputs of a support vector regression model. Representative earthquakes, which were recorded by the Structure Strong Earthquake Monitoring System of the Central Weather Bureau in Taiwan from 1992 to 2016, were used to construct the support vector regression model for predicting the peak floor acceleration (PFA) of each floor. The results indicated that the accuracy of the predicted PFA, which was defined as a PFA within a one-level difference from the measured PFA on Taiwan's seismic intensity scale, was 96.96%. The proposed system can be integrated into the existing earthquake early warning system to provide complete protection to life and the economy.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.4 no.2
• /
• pp.193-216
• /
• 1997

The purpose of this research was to understand the structure of the experiences of turnover among hospital nurses. The research question was 'What is the structure of the experiences of turnover among hospital nurses?' The sample consisted of 16 hospital nurses who experienced one or more turnover. The unstructured interview were carried out from July 15. through August 31., 1997. Intervewed by audio-recording and analyzed by Van Kaam's method. There were 361 descriptive expressions and priority classifications. The result summerized as 107 common elements, 38 syntheses of hypothetical definitions and 6 identifications of the structural definition. The structural definitions and hypothetical definitiones were as follows ; 1. There were different views on the turnover intention. Hard task, dissatisfaction of initial expectancy, uncomfortable relationship with doctors, inappriate reward, uncomfortable relationship with workers of other parts, uncomfortable relationship with patients, unreasonable promotion, uncomfortable relationship with co-worker, helplessness, poor environment of working conditions. 2. Motivating factor of turnover can be varied : self development, problem of social support, boring task, problem of relation-ship with the senior, unfair promotion, night duty. 3. Social supportive factors were co-worker support, senior support, self control, family support, time support. 4. There were different views on the job satisfaction. Task, relationship with patient, recognition, professionalism, promotion, working environment, relationship with co-worker, reward.

• Steel and Composite Structures
• /
• v.45 no.5
• /
• pp.715-728
• /
• 2022

Closed steel supports of different shapes are used in mining and underground constructions. The supports are prefabricated from rolled, usually robust, steel profiles. The load carrying capacity of a support is considerably influenced by the active loading and passive forces. The passive forces are induced by interactions between the support and the surrounding rock mass. The analysis herein comprises three parts: The first part consists of structural geometry processing. The second part involves finding the numerical solution of a statically indeterminate structure for a specified load. The third part is calculation of the load carrying capacity and the components of internal forces and deformations. For this, the force method and numerical integration are used. The Winkler model is applied when the support interacts with the surrounding environment. The load carrying capacity is limited by the slip resistance of the connected parts and it is limited by reaching the ultimate state of the profile. This paper serves as a comprehensive reference for the determination of the load carrying capacity of closed steel supports and includes stepwise derivations of the governing formulas.

• Smart Structures and Systems
• /
• v.13 no.3
• /
• pp.453-471
• /
• 2014

The fault diagnosis of rolling element bearings has drawn considerable research attention in recent years because these fundamental elements frequently suffer failures that could result in unexpected machine breakdowns. Artificial intelligence algorithms such as artificial neural networks (ANNs) and support vector machines (SVMs) have been widely investigated to identify various faults. However, as the useful life of a bearing deteriorates, identifying early bearing faults and evaluating their sizes of development are necessary for timely maintenance actions to prevent accidents. This study proposes a new two-layer structure consisting of support vector regression machines (SVRMs) to recognize bearing fault patterns and track the fault sizes. The statistical parameters used to track the fault evolutions are first extracted to condense original vibration signals into a few compact features. The extracted features are then used to train the proposed two-layer SVRMs structure. Once these parameters of the proposed two-layer SVRMs structure are determined, the features extracted from other vibration signals can be used to predict the unknown bearing health conditions. The effectiveness of the proposed method is validated by experimental datasets collected from a test rig. The results demonstrate that the proposed method is highly accurate in differentiating between fault patterns and determining their fault severities. Further, comparisons are performed to show that the proposed method is better than some existing methods.

• Journal of Family Resource Management and Policy Review
• /
• v.11 no.4
• /
• pp.93-114
• /
• 2007

The purpose of this study was to analyze the educational program that is offered on the information menu in the homepage (Familynet) of the Healthy Family-Support Center (HFSC) and suggest developmental directions. For this purpose, first, it deduced that the managerial principles of the education program, from related theories, are included in the family-system, family-structure, family-structure analysis, family life-cycle and ecological system theories. Second, it analyzed the educational programs of 44 local centers that are connected to the homepage (familynet.or.kr) of HFSC. Finally, it suggested developmental directions for managerial improvements of educational programs. As a result, the most popular part in the educational program was parent education, especially the visiting-father education program. The number of couple-related education programs were fewer than those for parent education, because it is difficult for couples to be present at the same time. Family and Self-Cognition programs cover insufficient contents in the parent-education program. Though total program in familylife education is quite large, the number of programs in each separate part is far too small for such a wide subject. So, each part in the program should be made more sufficient. Finally, it suggested the development of an evaluation system and a coaching process as special services for families that are in different development stages and have different family experiences, resources, needs and goals.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.8-13
• /
• 2010

Satellite structure should be designed to accommodate and support safely the payload and equipments necessary for its own missions and to secure satellite and payloads from severe launch environments. The launch environments imposed on satellites are quasi-static accelerations, aerodynamic loads, acoustic loads and shock loads. Especially when optical payload is accommodated, satellite structure usually adopts the optical bench consisting of composite material not only to support and secure but also to guarantee good pointing stability against extreme thermal environments. This paper deals with optical bench and support structure which shall be designed to minimize the loads transferred to optical payloads from satellite.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1667-1674
• /
• 2010

The fatigue life is estimated while determining the reliability of aircraft structures. In this study, the estimation of fatigue life was carried out on the basis of a cumulative damage theory; the working S-N curve and the equivalent stress on the engine support structure significantly affect the safety of the aircraft. The maximum stress observed was 1,080 MPa in the case of scissors link under crash load condition, and there was a 5% margin for the allowable stress corresponding to the temperature reduction factor. The maximum stress was 876 MPa, and the stress equation coefficient had a maximum value of 0.019 MPa/N in the case of scissors link under fatigue loads. In the results of the fatigue life analysis, the safety life in a fretting area of scissors link upper part was 416,667 flight hour, and other parts showed to infinite life. Therefore, it was demonstrated that the fatigue life requirement of aircraft engine support structure (scissors link, straight link) could be satisfied.

• Transactions of the KSME C: Technology and Education
• /
• v.5 no.2
• /
• pp.127-134
• /
• 2017

The reactor internals shall be secured in safety and structural integrity under various vibrational loading conditions. Thus, U.S. NRC, Regulatory Guide 1.20 requires the evaluation for the reactor internals due to acoustic induced vibration including the response to the reactor coolant pump pressure pulsation. This paper suggests a methodology to develop an analytical model of the core support barrel accounting for the fluid around the structure and to analyze the responses to the pump pulsation loads using acoustic structure interaction analysis. The analysis results were compared with those of US Palo Verde 1 CVAP and showed a good agreement. Thus, it is expected that the suggested methodology could be an efficient way to evaluate the response of the core support barrel to the pump pulsation loads.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.930-935
• /
• 2023

This study aimed to analyze the structure of the value chain of the olive flounder aquaculture industry to increase the value of this industry. Based on the value chain theory, olive flounder aquaculture industry activities were classified as primary and support activities. The primary activities included seed production, fish production, producer distribution, consumer distribution, and consumption. The support activities were production infrastructure, organization and specialization, R&D, and government policy. A survey was conducted on the costs of seed and fish production in the primary activities to investigate the business structure, and the distribution structure was analyzed to examine distribution costs and margins. In the support activities, the recent trends in R&D and government policy were mainly examined, based on which, a measure to reduce costs and maximize profits was suggested. It is necessary to reduce costs across the production processes by improving seed quality and reducing labor, feed, and management costs, which are strongly associated with support activities. Therefore, lowering costs will be possible in the olive flounder aquaculture industry when R&D outcomes, such as species development, feed quality improvement, and aquaculture system development, are stably diffused and applied in tandem with government policy regarding the industry.