• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1542-1549
• /
• 2009

The function of subgrade in the railway is to support track load on the subgrade as well as train load. Unlike the traditional railway, the uppermost subgrade layer in the Gyeongbu high speed railway was constructed as the reinforced road bed. The reinforced road bed comprises sub-ballast in the upper part and grade ballast in the lower part. The filling material such as soil and rocks in the subgrade can be settled by consolidation of original ground, compression due to self weight, plastic displacement due to train operation, and unequal settlement due to embankment material or improper compaction, therefore many efforts have been given for sufficient compaction and use of proper filling materials in the construction stage. The purpose of this study is to investigate the deformation state of subgrade in the Gyeongbu high speed railway. The investigation on the subgrade settlement was performed by choosing representative sections suspected to be settled based on the previous GPR test results and track maintenance history, measuring the settlement for some time period after installing settlement measuring instruments on and under the reinforced road bed. and analyzing the long-term subgrade settlement data from monitoring system which was installed at the construction stage of the high speed railway.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.125-146
• /
• 2014

This review aims to provide a synthesis of the knowledge generated and the lessons learned in roughly 15 years of UMo dispersion fuel R&D in Europe through a series of irradiation experiments. A lot of irradiations were also performed outside of Europe, particularly in the USA, Russia, Canada, Korea and Argentina. In addition, a large number of out-of-pile investigations were done throughout the world, providing support to the understanding of the phenomena governing the UMo behaviour in pile. However, the focus of this article will be on the irradiations and Post-Irradiation Examination (PIE) results obtained in European experiments. The introduction of the article provides a historic overview of the evolution and progress in the high density UMo dispersion fuel development. The ensuing sections then provide further details on the various phases of the development, from the UMo dispersion in a pure Al matrix through the addition of Si to the matrix to address the interaction layer formation and finally to the more advanced solutions to the excessive swelling encountered in various experiments. This review was based only on published results or results that are currently in the process of being published.

• Ocean and Polar Research
• /
• v.32 no.3
• /
• pp.267-268
• /
• 2010

Many countries has been interested in studying the East Sea to look ahead into the world oceans' future, since the East Sea has been known as a miniature ocean. In this respect, PICES decided the East Asian Seas Time-series (EAST) studies, and the East Sea as the first subject (EAST-I). Since 2006 Ministry of Land, Transport & Maritime Affairs, Korea has supported the Korean EAST-I program. Through the Korean EAST-I program, 44 research papers were published in various scientific journals. This special issue contains 6 research articles including results from the interdisciplinary observation in the summer, 2008. Those articles cover the entire East Sea from the Korea Strait to the Japan Basin, and also cover the studies of the euphotic layer to the bottom sediment. MLTM and KIMST have provided full support to EAST-I program. KHOA carried out the joint cruises in the Ulleung Basin. Those are deeply appreciated. Finally, we would like to express our gratitude to the editorial board of Ocean & Polar Research.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.126-134
• /
• 2006

The object oriented co-modeling methodology, previously introduced, employs a layered approach in war game models development in which an upper layer models abstract behavior of an object and a lower one models details of the object. Within the methodology military domain experts and simulation experts models an object at the upper and the lower layers, respectively in concurrent manner. This paper proposes a method of constructing a war game simulator using parametric behavior modeling technique, which provides a means for military domain experts/users to change model's detailed behavior with no knowledge on modeling semantics. The proposed simulator would support new algorithms or strategies with minimal cost and could be modified even by the users who are ignorant about modeling technique. To demonstrate the effectiveness of the proposed framework, a naval war game simulator is exemplified.

• Journal of KSNVE
• /
• v.2 no.1
• /
• pp.21-31
• /
• 1992

In the previous paper, we report a practical floor impact sound level prediction method for a heavyweight impact source(Tire), soft impact source such as children jumping and running. According to these results, the calculated value and the measured value correspond comparatively well, regardless of differences in the floor structures. And the floor impact sound for a heavyweight impact source, soft source was strongly influenced by structural factors such as floor slab stiffness and peripheral support conditions. But the floor impact sound for a light impact source (Tapping machine), hard impact source was influenced by resilient layers, composed of multi-layer in floor structures. Thus, In this paper, 4 actual floor structures, all with differing resilient layers, were calculated using impedance method. When these calculation values were compared with the measured values, approximately all the values fell with one rank of the sound insulation grade, reference curve(L curve) by the JIS standard. So, a sample of measured values and calculated values from floor structures is presented to show the accuracy and appropriateness of the impedance method in domestic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1266-1271
• /
• 2010

In this paper, we describe overhead problems which result from the supporting NEMO in PMIPv6 networks, and propose a novel binding scheme for the network-based mobility management with new network-layer message which solves the problems of the additional tunnel. Our proposed binding scheme can reduce handover latency without mobility-related procedure by the hosts. A performance evaluation shows that the proposed scheme works more efficiently than the scheme which is proposed by the IETF NETLMM WG in terms of packet loss, handover latency and average packet throughput.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.1
• /
• pp.30-33
• /
• 2012

A double pancake winding method is widely used to make the superconducting magnet, using high temperature superconductor (HTS) tape. In the double pancake winding method, the joints with contact resistances between double pancake coils are inevitably needed. The electrical joule heating on the contacts causes refrigerant loss during operation. And a space outside the winding, for splices and mechanical support, is more than that for its layer-wound equivalent. In this paper, a double pancake winding method in order to reduce the number of the joints was proposed. Both of the double pancake coils using the conventional winding method and the proposed winding method have been fabricated and tested to make the solution technically feasible in the double pancake winding method. Especially, critical-current tests of the fabricated double pancake coils were conducted in order to show the same performance and confirm contact resistances between double pancake coils.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.11a
• /
• pp.133-147
• /
• 2005

In order to investigate applicability for 2,2,2-trifluoroethyl methacrylate (TFEMA) produced by esterification of 2,2,2-trifluoroethanol(TFEA) and methacrylic acid(MA) using pervaporation membrane, poly(vinyl alcohol) (PVA) composite membranes were prepared with glutaraldehyde(GA) onto porous polyethersulfone(PES) support. The degree of crosslinking and thickness of PVA coating layer were analyzed by swelling test and SEM(scanning electron microscopy), respectively. Pervaporation test was done with two feed mixures; TFEA/water, MA/water. The pervaporation data were obtained as a function of content of crosslinking agent, feed composition, and operating temperature, respectively. In case of TFEA-water(90/10 wt%) feed mixture at $80^{\circ}C$, the optimized membrane showed the high permeation flux of 1.5 $kg/m^2hr$ and separation factor of 320. In case of MA-water(90/10 wt%) feed mixture, the membranealso showed high permeation flux of 2.3 $kg/m^2hr$ and separation factor of 740 in same conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.487-492
• /
• 2000

The ABR(available bit rate) service has been developed to support data application over ATM(asynchronous Transfer mode) networks, and TCP is the most widely used transport layer protocol in existing data networks. Thus, the performance improvement of TCP over ABR is an issue of cardinal importance. In this paper, we propose algorithm of the adjustment of congestion window size utilizing RM(resource Management) cell information. The motivation is to use more reliable information in ER(explicit rate) field within RM cell to determine TCP window size. Simulations are performance using the suggested algorithm is improved, as compared to TCP-reno.

• Information and Communications Magazine
• /
• v.13 no.3
• /
• pp.61-70
• /
• 1996

In this paper, the architecture of the LAN Emulation service defined by the ATM Forum is introduced. In order to use the vast base of the existing LAN application software in ATM network. LAN Emulation provides a MAC layer service emulating connectionless services of legacy LANs on ATM networks. LAN Emulation forms a logical overlay network, called and emulated LAN, on top of an ATM network. LAN Emulation service comprises a set of LAN Emulation Clients(LECs) residing in end stations of an emulated LAN and three logical service entities : LAN Emulation Configuration Server (LECS), LAN Emulation Server(LES). and Broadcast and Unknown Server(BUS). LEC utilizes the services provided by these three servers to provide seamless interworking between legacy LANs and ATM networks, and to support transparent communications between LAN applications over ATM.