• Journal of Convergence for Information Technology
• /
• v.11 no.4
• /
• pp.26-34
• /
• 2021

In the era of the Fourth Industrial Revolution, the future battlefield will carry out multi-area operations with hyper-connected, high-speed and mobile systems. In order to prepare for changes in the future, the Korean military intends to develop various weapons systems and form a multi-layer tactical network to support On The Move communication. However, current tactical networks are limited in support of On The Move communications. In other words, the operation of multi-beam antennas is necessary to efficiently construct a multi-layer tactical network in future warfare. Therefore, in this paper, we look at the need for multi-beam antennas through the operational scenario of a multi-layer tactical network. In addition, based on development consideration factors, features of rotary-wing and fixed-wing aircraft, we present the location and operation of airborne relay drone installations of multi-beam antennas.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.458-464
• /
• 2006

The Pd-Ni-Ag alloy composite membrane using modified porous stainless steel (PSS) as a substrate was prepared by a electroless plating technique. In this work, we have introduced the intermediate layer between Pd-based alloy and a metal substrate. As an intermediate layer, the mixtures of nickel powder and inorganic sol such as $SiO_{2}$ sol, $Al_{2}O_{3}$ sol, and $TiO_{2}$ sol were used. The intermediate layers were coated onto a PSS substrate according to various membrane preparation conditions and then $N_{2}$ fluxes through the membranes with different intermediate layers were measured. The surface morphology of the intermediate layer in the mixture of nickel powder and inorganic sol was analyzed using scanning electron microscope (SEM). Finally, the Pd-Ni-Ag alloy composite membrane using the support coated with the mixture of nickel powder and silica as an intermediate layer was fabricated and then the gas permeances for $H_{2}$ and $N_{2}$ through the Pd-based membrane were investigated. The selectivity of $H_2/N_2$ was infinite and the $H_{2}$ flux was $1.39{\times}10^{-2}mol/m^2{\cdot}s$ at the temperature of $500^{\circ}C$ and trans-membrane pressure difference of 1 bar.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.6
• /
• pp.29-38
• /
• 2010

Micro-piles have been used to increase the bearing capacity or to restrain settlement of existing shallow foundation. Recently, micro-piles are used to support the shallow foundation, to stabilize the slope and to resist the sliding of retaining wall. Using the micro-piles in geotechnical engineering, some investigators have studied the effective installing method by model test or field test. But most of previous studies are chiefly focused on the micro-piles in sand or clay layer. If a rock layer exists in soil, the installing length of micro-piles may be determined by the depth of rock layer. In this case, the stiffness of pile may be changed by the installing length of pile, and so the installing method has to be altered by the changed stiffness of pile. Model tests have been conducted to study the installation method of micro-pile in soil with rock layer. As a result, when the ratio of length of pile is below 50 ($L/d{\leq}50$), installing of micro-piles in vertical position is effective regardless of the depth of rock layer. If the depth of rock layer is deeper than soil failure zone and the ratio of the length of pile exceeds 50 (L/d>50), installing of the micro-piles in sloped position is effective.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.137-144
• /
• 2019

For the structures near the seismogenic fault, the evaluation of seismic performance against near-fault ground motions is important as well as for design ground motions. In this study, characteristics of seismic behaviors and seismic performance of the pile-bent bridge constructed on the thick soft soil site with various weak soil layers were analyzed. The input ground motions were synthesized by the directivity pulse parameters for intra-plate regions. The ground motion acceleration histories of each layer were obtained by one-dimensional site response analysis. Each soil layer was modeled by equivalent linear springs, and multi-support excitations with different input ground motions at each soil spring were applied for nonlinear seismic analyses. The analysis result by the near-fault ground motions and ground motions matched to design spectra were compared. In case of the near fault ground motion input, the bridge behaved within the elastic range but the location of the maximum moment occurred was different from the result of design ground motion input.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1431-1439
• /
• 2016

In this paper, we propose a new location service and location-based routing for data dissemination from a source to a mobile group sink in less energy consumption of the sensor node. Unlike the existing protocols, the proposed protocol uses a leader sink instead of a group area as the location information to represent a mobile sink group. The proposed protocol also uses grid leaders on virtual grid structure to support sink mobility in location service. By using a leader sink as a representative and grid leaders for mobility supporting, the proposed protocol can exploit an efficient hierarchical location service and data dissemination method without using flooding. Accordingly, the proposed protocol carries out upper layer location services and data dissemination between a leader sink and a source and lower layer location services and data dissemination between the leader sink and member sinks. Simulation results demonstrate that the proposed protocol achieves energy-efficiency.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.503-508
• /
• 2007

Since the Wibro service realize mobile network on the public, it has been considered that it is not enough to support real time service at vehicular speed. The standard Fast Mobile IPv6 Handover Protocol using HMIPv6 may guarantee seamless service as long as the Mobile Node moves in the same domain MAP however it does not regard fast handover over inter-MAP domain. Thus Macro Mobility Handover in HMIPv6 was proposed to reduce handover latency in inter-MAP domain. But it is still not enough to support real-time service. So we propose an Improved FHMIPv6 over 802.16e network to reduce the overall handover latency. We embedded Layer 3 handover messages of the FHMIPv6 into the Layer 2 handover messages. So the MN is able to $^-nish$ overall handover procedure earlier in our scheme. The numerical results show the performance of IFHMIPv6 has improved about 32% in comparison with FHMIPv6.

• The KIPS Transactions:PartB
• /
• v.13B no.4 s.107
• /
• pp.439-448
• /
• 2006

Previous recognition/clustering algorithms such as Kohonen SOM(Self-Organizing Map), MLP(Multi-Layer Percecptron) and SVM(Support Vector Machine) might not adapt to unexpected input pattern. And it's recognition rate depends highly on the complexity of own training patterns. We could make up for and improve the weak points with lowering complexity of original problem without losing original characteristics. There are so many ways to lower complexity of the problem, and we chose a kernel concepts as an approach to do it. In this paper, using a kernel concepts, original data are mapped to hyper-dimension space which is near infinite dimension. Therefore, transferred data into the hyper-dimension are distributed spasely rather than originally distributed so as to guarantee the rate to be risen. Estimating ratio of recognition is based on a new similarity-probing and learning method that are proposed in this paper. Using CEDAR DB which data is written in cursive letters, 0 to 9, we compare a recognition/clustering performance of kSOM that is proposed in this paper with previous SOM.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.203-210
• /
• 2004

A new research of geographic information system has been focused on an open architecture, interoperability and extensibility in their design. In order to process huge data, multidimensional data and heterogeneous geographic format data, these research move away from monolithic system to open structure system managing application layer and user interface layer. Nowadays, many developers have used CORBA middleware for the OGIS systems. However, CORBA middleware has some problems that support only a point-to-point communication and takes a long time to transfer sever data to client. Thus, in this paper, we propose a method on modifying a point-to-point communication and implement the efficient communication method. The proposed method that transfer data from sever to client in one connection support a group communication and reduce a transfer time delay.

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.938-949
• /
• 2015

In this paper, we propose a robust speed-limit sign recognition system which is durable to any sign changes caused by exterior damage or color contrast due to light direction. For recognition of speed-limit sign, we apply CNN which is showing an outstanding performance in pattern recognition field. However, original CNN uses multiple hidden layers to extract features and uses fully-connected method with MLP(Multi-layer perceptron) on the result. Therefore, the major demerit of conventional CNN is to require a long time for training and testing. In this paper, we apply randomly-connected classifier instead of fully-connected classifier by combining random forest with output of 2 layers of CNN. We prove that the recognition results of CNN with random forest show best performance than recognition results of CNN with SVM (Support Vector Machine) or MLP classifier when we use eight speed-limit signs of GTSRB (German Traffic Sign Recognition Benchmark).

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.687-693
• /
• 2004

Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.