• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.50-54
• /
• 2008

A conduction-cooled superconducting magnet system is developed for material separation. The superconducting magnet for material separation has to be designed to have a strong magnetic field in a control volume. Since the magnetic field gradient is larger at the end rather than at the center of the magnet, we developed a design method to optimize the superconducting magnet for material separation. The safety of the superconducting magnet is evaluated, taking into account the electro-magnetic field, heat and structure. The superconducting coil is successfully wound by the wet-winding method. The superconducting coil is installed in a cryostat maintaining high vacuum, and cooled down to approximately 4 K by a two-stage GM cryocooler. The performance of the conduction-cooled superconducting magnet system is discussed with respect to the supplied current, cooling medium and cooling power of a cryocooler.

• 한국화재소방학회논문지
• /
• 제31권4호
• /
• pp.26-34
• /
• 2017

본 논문은 거실제연설비의 인접구역 상호제연방식의 성능 확인 및 향상을 위한 논문으로써 국가화재안전기준(NFSC)과 NFPA 연기제어에 관한 규정을 비교 분석하였다. 분석방법은 화재 시뮬레이션(FDS)을 통해 모델링을 실시하여, 급기량 변화, 제연경계의 폭, 화재실내 가연물 변화, 유입공기의 풍속차이를 통해 이루어졌다. 그 결과 청결층 확보를 위해 급기량을 배출량 이하로 하였을때 화재실에서의 청결층 확보에 유리한 것으로 나타났으나 급기실에서는 급기량을 배출량 이상으로 하였을때 청결층 확보에 유리한 것으로 나타났으며, 제연경계의 폭이 길어질수록 성능 확보에 유리한 것으로 나타났다. 또한 가연물의 종류에 따라 급기량과 배출량을 고려해야 하며, 공기유입구 풍속은 급기량을 감소시킴과 동시에 공기유입구 풍속을 낮게 하므로써 화재실의 청결층 확보에 유리한 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.365-373
• /
• 2021

In this study, evaporation of LN2 non-spreading pool on concrete plate was dealt with experimentally. The thermophysical properties of concrete, which is a composite material, were obtained by minimizing the difference between the numerical analysis results obtained from the assumed properties and the results from experiments. The thermal energy required for evaporation of the liquid pool is supplied from the concrete plate and the wall of the container. As a result of the measurement, the thermal energy flowing in from the wall was negligible compared to the one supplied from the concrete plate. It was found that the measured evaporation rate of the liquid pool by the heat energy supplied through the concrete plate agrees well with the PTC model except for the initial section of the experiment. The validity of the semi-infinite assumption and the one-dimensional assumption, which are the main conditions of the PTC model, was also verified through experiments. The evaporation rate model in the non-spreading pool discussed in this study can provide a basic frame for the one in the spreading pool, which is a meaningful result considering that the spreading pool is very realistic compared to the non-spreading pool.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.503-507
• /
• 2011

Objective: This paper presents the factors influencing the effectiveness of materials handling equipments in agriculture. Background: Agriculture is one of the job categories where work-related musculoskeletal disorders(MSDs) are the most common. Statistics shows that majority of farm workers is exposed to repetitive and forceful body movements, lifting, lowering, pushing, pulling, or carrying heavy materials. In such a working environment, materials handling equipments are required and introduced to assist in the prevention of MSDs and other farm injuries. Method: Examples of materials handling equipments are rail carts, portable lifts, and bale handlers. Contributing factors influencing the effectiveness of materials handling equipments supplied in agriculture were identified based on the lessons learned from previous government-funded ergonomic projects. Results: Contributing factors identified include: (1) forward-looking attitude for the standardization of farming, its environments, and handling equipments, (2) participation of farm members in the process and evaluation of project, (3) leadership of project manager, (4) reinforcement of safety education and training, and (5) project selection and priority of handling equipment. Conclusion: Government-funded research planners, farmers, ergonomists, and farm machine experts are recommended to consider the factors identified when implementing materials handling equipments in agriculture. Application: Actual or potential application of this research includes recommendation for the effective implementation of material materials handling equipments in agricultural sectors.

• International Journal of Concrete Structures and Materials
• /
• 제7권3호
• /
• pp.203-214
• /
• 2013

This study investigates quantitative methods for assessment of infrared analysis of concrete admixtures using correlation coefficients by performing IR scans following the ASTM C494/C494M-11 specifications. In order to achieve this goal, numerous IR scans were performed on specimens supplied by the manufacturer from different batches to ensure uniformity and equivalency. These scans were then analyzed to create correlation coefficients for each admixture. The correlation coefficients were used to quantitatively evaluate and interpret IR Scans of job samples. The study focused on 23 most commonly used concrete admixtures by the New Jersey Department of Transportation (NJDOT). They include air-entrainers, accelerators, retarders, water reducers, and other combinations of these admixtures. Their correlation coefficients were established by analyzing a total of 12 scans of each admixture from three different batches supplied by the manufacturer at different time intervals. In order to validate the obtained correlation coefficients and establish a target correlation, job samples were tested and compared to the obtained correlations. The study also evaluated the effects of drying time and using different types of KBr on correlation coefficients.

• 생물환경조절학회지
• /
• 제10권2호
• /
• pp.101-105
• /
• 2001

팽연화왕겨 배지는 펄라이트와 수분특성이 달라서 펄라이트는 과채류 재배용 스티로폼베드에서 재배할 경우 1일 1.5~2.0L씩의 급액량을 1일 16회로 분할하여 급액한 처리에서 가장 좋은 생육을 보였으나 팽연화왕겨는 1일 16~24회로 분할 급액할 경우 높은 수량성을 보였다. 또한 토마토 재배시 정식 후 25일간 급액 EC를 높여줌으로써 우수한 생육 및 수량을 얻을 수 있었으며 초기 부숙이 급속히 진행되는 과정에서 발생되는 NO$_3$의 부족을 보완할 수 있을 것으로 판단된다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권5호
• /
• pp.316-322
• /
• 2002

A newly isolated heterotrophic marine bacterium, Vibrio alginolyticus, was used to remove a high load of ammonia gas under non-sterile condition. The cells were inoculated onto an inorganic packing material in a fixed-bed reactor (biofilter), and a high load of ammonia, in the range of ammonia gas concentration of 170 ppm to 880 ppm, was introduced continuously. Sucrose solution and 3% NaCl was supplied intermittently to supplement the carbon source and water to the biofilter. The average percentage of gas removed exceeded 85% for 107-day operation. The maximum removal capacity and the complete removal capacity were$19\;g-N\;kg^{-1}$ dry packing material $day^{-1}$ and $16\;g-N\;kg^{-1}$ dry packing material $day^{-1}$, respectively, which were about three times greater than those obtained in nitrifying sludge inoculated onto the same packing material. On day 82, the enhanced pressure drop was restored to the normal one by NaOH treatment, and efficient removal characteristics were later observed. During this operation, the non-sterile condition had no significantly adverse effect on the removability of ammonia by V. alginolyticus.

• 한국지반환경공학회 논문집
• /
• 제5권4호
• /
• pp.65-72
• /
• 2004

건설 골재 수급 문제 및 환경에 대한 관심이 높아지면서 국내에서 동슬래그와 같은 각종 산업폐기물의 재활용과 그에 따른 기술개발에 대한 연구가 활발히 진행되고 있다. 이에 본 연구는 동슬래그의 재료특성, 입도분포와 환경적 안정성의 검토를 통하여 동슬래그의 배수재로 적용성을 검토하였다. 실내시험결과를 통하여 일반적으로 쓰여지는 모래보다 우수한 연직배수효과가 있음을 알 수 있었다. 특히 분사현상에 대한 안정성 및 입자유실에 대한 내적안정성을 검토한 결과, 일반적인 사질토에 비해 한계동수경사가 크게 나타나고 내적안정성이 우수하게 평가되었다. 따라서 동슬래그는 지반조건에 따라 배수기능을 충분히 발휘할 수 있으며 내적으로도 안정한 배수재로서 사용이 가능한 것으로 판단된다.

• Korea-Australia Rheology Journal
• /
• 제16권4호
• /
• pp.169-173
• /
• 2004

The control of the rheological properties of a fluid during processing is important and can determine the efficiency of the production in addition to the performance of the final product. The vast majority of process fluids are viscoelastic, hence an instrument that measures both the viscous and elastic properties of the material during processing would be of great practical use. However, most in-line instruments commercially available to date are only capable of measuring viscosity at a single shear rate. An in-line rheometer that measures both the viscous and elastic properties of fluids over a wide range of shear rates simultaneously has been described in a previous publication (Glasscock et at., 2003) in which the results of measurements on flowing sunflower oil were presented. Before this instrument can be used in an industrial situation, it must be demonstrated that the generated results are the same as, or bear some fixed relationship to, the results obtained by conventional off-line rheometers. To this end, the present investigation describes the measurements of a standard reference fluid, polyisobutylene dissolved in 2,6,10,14-tetramethylpentadecane, labelled SRM2490 by the National Institute of Standards and Technology (NIST) in the USA. The results obtained using the in-line rheometer show remarkably good correlation for viscosity, using a modified Cox­Merz rule, with the results supplied with the reference material from NIST.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.540-543
• /
• 2010

가스 중에 포함되어 있는 질소산화물을 안전하게 처리하기 위하여 저온 플라즈마 반응기를 제작하여 반응기내에 공급되는 반응물질의 유량과 방전주입전력량에 대한 장치의 특성을 실험적으로 조사하고, 유효성을 검정하였다. 반응가스는 $NO/N_2$ 혼합가스와 $N_2/O_2$ 혼합가스를 이용하여 초기 NO 농도를 설정하고, 유속을 1~4 l/min으로 공급하였다. 반응물질의 유량이 증가할 때 NO의 감소율이 낮고, 방전주입전력이 높을 때 NO의 분해가 용이하였다. 또한 반응물질의 지연시간이 길고 방전주입전력이 높을수록 NO의 분해에너지 효율이 높았으며, 유량이 많고 방전 주입 전력량이 증가할수록 오존의 생성량이 증가하였다.