• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.209-219
• /
• 2006

The supersonic combustion experiments are carried out using T3 free-piston shock tunnel. Different shock tube fill pressures have various inflow conditions. $15^{\circ}$ inclined hydrogen fuel injection is located before the cavity. Oblique shock is generated at the trailing edge of the cavity and reflects off the top and bottom wall. For non-reacting flow, static pressures in low equivalence ratio are similar to those in no fuel injection. As equivalence ratio is increased, static pressures are increased in the duct. In the similar equivalence ratio, static pressures are increased when total enthalpy is decreased. For reacting flow, the flame is occurred near the cavity. The combustion is weak locally in the middle of the duct. The up and down pressure distribution in the duct means that the supersonic combustion is generated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.332-335
• /
• 2008

본 연구의 목적은 수소 및 탄화수소를 이용한 bluff-body 화염 안정화 및 hyper-mixer와 같은 초음속 연소기 연료 분사기 주변의 유동해석 이다. 대규모 박리영역을 갖는 후방단 형상의 초음속 주변 유동을 해석하기 위한 검증 단계로 다양한 수치기법을 평가해 보았다. 고차 공간 정확도로 확장된 5차 TVD-MUSCL기법, Roe FDS, S-A DES/DDES 조합이 기저유동과 기저유출 유동에 좋은 결과를 보여 주었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.111-115
• /
• 2009

초음속 엔진으로부터 구성한 모델 연소기를 설계/제작하여 연소시험 중 발생하는 연소불안정을 측정하고 화염안정화 장치를 이용하여 2차 연료를 분사하는 방법으로 연소불안정을 능동제어하는 기법에 관해 연구하였다. 연소실 압력측정이나 화염의 광학적 계측을 통해 연소불안정 주파수를 검출하였고, 고속으로 운용할 수 있는 마그네틱 밸브를 구동기로 선정하여 밸브 후단 압력 및 2차 분사되는 연료의 분무의 광학적 계측을 통해 연료 변조 특성을 확인하였다.

• 한국추진공학회지
• /
• 제23권3호
• /
• pp.76-87
• /
• 2019

공동형 화염 안정화 장치를 갖는 초음속 연소기를 직접 연결 방식으로 시험을 수행하였다. 고도 20 km, 비행 마하수 4에 해당하는 전온도, 전압력 유동 조건에 대해 액체 탄화 수소 연료를 경사 분사와 공력 램프 분사의 2가지 방법으로 분사하였다. 축방향 벽면 압력과 연소기 출구의 전압력을 계측하여 연료량에 따른 연소 특성을 파악하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.191-194
• /
• 2003

A series of computational simulations have been carried out for non-reacting and reacting flows in a supersonic combustor configuration with and without a cavity. Transverse injection of hydrogen, a simplest form of fuel supply, is considered in the present study with the injection pressure of 0.5 and 1.0 ㎫. The corresponding equivalence ratios are 0.17 and 0.33. The work features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous studies. In particular, oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is related not only to the cavity, but also to the intrinsic unsteadiness in the flowfield. The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The role of the cavity, injection pressure, and amount of heat addition are examined systematically.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.328-331
• /
• 2008

본 연구에서는 모델 스크램제트 엔진의 특성을 자세히 고찰하기 위해 수치해석을 수행하여 실험결과와 비교분석하였다. 수치해석을 통해 예측한 압력분포도는 충격파 터널을 이용한 지상시험과 잘 일치하는 결과를 보였다. 또한 연소기 내부의 정온도 및 정압력분포에 대한 분석에서 공동보염기는 국소적인 고온영역을 발생시키며, W자형 카울은 유동의 가로방향에 대해 압력불균형을 유발시킨다는 특성을 확인하였다. 이러한 특성은 연소기 내부의 초음속 연소를 증진시키는 효과로 이어졌다.

• 한국연소학회지
• /
• 제12권1호
• /
• pp.21-27
• /
• 2007

The supersonic combustion experiments are carried out using T3 free-piston shock tunnel. Different shock tube fill pressures have various inflow conditions. $15^{\circ}$ inclined hydrogen fuel injection is located before the cavity. Oblique shock is generated at the trailing edge of the cavity and reflects off the top and bottom wall. For non-reacting flow, static pressures in low equivalence ratio are similar to those in no fuel injection. As equivalence ratio is increased, static pressures are increased in the duct. In the similar equivalence ratio, static pressures are increased when total enthalpy is decreased. For reacting flow, the flame is occurred near the cavity. The combustion is weak locally in the middle of the duct. The up and down pressure distribution in the duct means that the supersonic combustion is generated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.340-345
• /
• 2008

Liquid hydrocarbon fuels are gathering increasing attention as candidates for a scramjet engine fuel. Experimental researches on supersonic combustion of kerosene have been conducted in model scramjet combustors. Through these works, understanding of combustion characteristics of kerosene have been revealed on some level, and so we decided to work on other kinds of liquid hydrocarbon fuels in order to explore effects of fuel properties on supersonic combustion performances, especially self-ignition and flame-holding. In addition, comparing the results of new fuels with kerosene, the relationship between fuel properties and supersonic combustion characteristics was discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.75-78
• /
• 2004

Various jet engines (Turbine engine family and RAM Jet engine) have been developed for high speed aircrafts. but their application to hypersonic flight is restricted by principle problems such as increase of total pressure loss and thermal stress. Therefore, the development of next generation propulsion system for hypersonic aircraft is a very important subject in the aerospace engineering field, SCRAM Jet engine based on a key technology, Supersonic Combustion. is supposed as the best choice for the hypersonic flight. Since Supersonic Combustion requires both rapid ignition and stable flame holding within supersonic air stream, much attention have to be given on the mixing state between air stream and fuel flow. However. the wider diffusion of fuel is expected with less total pressure loss in the supersonic air stream. So. in this study the direction of fuel injection is inclined 30 degree to downstream and the total pressure of jet is controlled for lower penetration height than thickness of boundary layer. Under these flow configuration both streams, fuel and supersonic air stream, would not mix enough. To spread fuel wider into supersonic air an aerodynamic force, baroclinic torque, is adopted. Baroclinic torque is generated by a spatial misalignment between pressure gradient (shock wave plane) and density gradient (mixing layer). A wedge is installed in downstream of injector orifice to induce an oblique shock. The schlieren optical visualization from side transparent wall and the total pressure measurement at exit cross section of combustor estimate how mixing is enhanced by the incidence of shock wave into supersonic boundary layer composed by fuel and air. In this study non-combustionable helium gas is injected with total pressure 0.66㎫ instead of flammable fuel to clarify mixing process. Mach number 1.8. total pressure O.5㎫, total temperature 288K are set up for supersonic air stream.

• 한국추진공학회지
• /
• 제4권2호
• /
• pp.12-20
• /
• 2000

The numerical analysis, including chemical reaction of an entire ramjet engine is studied to understand the ignition transient mechanism and the dynamic characteristics of the Integrated Rocket Ramjet System comprehensively. Details of how a subsonic combustion environment is established from the supersonic ram air after removal of the inlet port cover, are examined during the ignition transient. Various physical processes are investigated systemically, including ignition, flame propagation, flame dynamics, and vorticity evolution.