• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.669-676
• /
• 2014

국내 승용차용 삼원촉매담체의 경우 배기가스 변환 효율이나 압력 강하 등은 엔진 효율 측면에서 만족되고 있지만 열적 내구성은 요구 내구 수명을 만족시키지 못하여 차량정비현장에서 상당한 파손사고가 발견되고 있다. 본 논문에서는 이러한 현상의 원인을 밝히기 위하여 국내 승용차용 삼원촉매담체에서 발생되는 열응력을 온도측정자료와 단순한 열응력 모델을 이용하여 구하였으며 열피로 성능은 확정론적 강도가 아닌 확률과 크기 및 피로 인자를 고려한 확률론적 설계 강도로 평가함으로서 확정론적 설계 강도에 의한 열피로 성능 평가 방법을 극복하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.703-722
• /
• 2016

Passive wireless devices have increasing civilian and military applications, especially in the scenario with wearable devices and Internet of Things. In this paper, we study indoor localization of a target equipped with radio-frequency identification (RFID) device in ultra-wideband (UWB) wireless networks. With known room layout, deterministic multipath components, including the line-of-sight (LOS) signal and the reflected signals via multipath propagation, are employed to locate the target with one transmitter and a single inaccurate receiver. A factor graph corresponding to the joint posterior position distribution of target and receiver is constructed. However, due to the mixed distribution in the factor node of likelihood function, the expressions of messages are intractable by directly applying belief propagation on factor graph. To this end, we approximate the messages by Gaussian distribution via minimizing the Kullback-Leibler divergence (KLD) between them. Accordingly, a parametric message passing algorithm for indoor passive localization is derived, in which only the means and variances of Gaussian distributions have to be updated. Performance of the proposed algorithm and the impact of critical parameters are evaluated by Monte Carlo simulations, which demonstrate the superior performance in localization accuracy and the robustness to the statistics of multipath channels.

• 한국산업정보학회논문지
• /
• 제23권5호
• /
• pp.33-41
• /
• 2018

Most important thing when designing and implementing a supply chain network is to consider various problems which may occur in real world situation. In this paper, we propose a supply chain network considering two problems (environmental factor and transportation types) under real world situation. CO2 emission amount as environmental factor is considered since it is usually generated from production and transportation processes. Normal delivery, direct delivery and direct shipment as transportation types are also considered since many customers ask various transportation types for delivery or shipment of their products under on-line or off-line purchase environment. The proposed supply chain network considering environmental factor and transportation types is represented in a mathematical formulation and implemented using hybrid genetic algorithm (HGA) approach. In numerical experiments, several scales of supply chain networks are presented and implemented using HGA approach. The performance of the HGA approach is compared with those of some conventional approaches under various measures of performance. Finally, it is proved that the performance of the HGA approach is superior to those of the others.

• 생명과학회지
• /
• 제26권7호
• /
• pp.855-867
• /
• 2016

말은 인류에 의해 상대적으로 일찍 가축화된 종 중 하나로써, 경주능력, 강건성 및 항병성 등과 같은 능력을 위해 인공적으로 선택되었다. 그 결과, 현재 경주마로 많이 쓰이고 있는 서러브레드의 게놈은 운동 능력에 특화된 유전자형을 많이 갖고 있다. 최근 NGS 기술의 도래와 함께 전장게놈을 대상으로 경주마의 우수한 유전형질을 찾는 연구가 유전체학의 관점에서 진행되고 있다. 그 결과 말의 게놈에 대해서도 GWAS (Genome-wide Association study)가 적용되고 있고, 우수 경주능력을 나타내는 유전자 마커가 발굴되고 있다. 아울러, 특정 샘플의 전장 전사체를 NGS 기법으로 분석할 수 있는 RNA-Seq 기법 역시 활용되고 있는데, 이를 통하여 각 개체별, 운동 전후, 한 개체의 조직별 특정 유전자의 발현 양상과 함께 전사체의 서열 등을 확인할 수 있다. DNA 서열의 변화 없이 유전자 발현을 조절하는 강력한 인자로써 DNA methylation이 주목받고 있다. 말의 게놈에 있어서도 운동 특이적 또는 개체 특이적 DNA methylation 패턴을 보여 주었고, 이는 우수 개체 선정을 위한 마커 개발에 좋은 단서를 제공해 줄 것이다. 유전자 발현을 억제하는 miRNA와, 포유동물의 유전체 내 절반 정도를 차지하고 있는 이동성 유전인자는 기능유전체 연구에 있어서 중요한 인자들이다. 이들은 인간의 게놈에서 많이 연구가 되어 왔으나, 말에서의 연구는 현재 미미한 실정이다. 하지만, 현재까지 말에서 되어 있는 위의 두 인자에 대한 연구 현황을 알아보고, 차후 우수 마 선별 연구에 적용될 가능성을 제시하였다. 기능유전체 및 후성유전체 분석 기법이 발전함에 따라 말에서도 본 연구에서 소개된 여러 가지 분석 기법이 적용되고, 우수한 경주마를 선정하는 데 많은 도움을 줄 것으로 기대하고 있다. 이에 현재까지의 우수한 경주마를 선택하기 위한 많은 연구들 및, 말 연구에 대한 앞으로의 발전 가능성에 대해 고찰하고 토의하였다.

• 설비공학논문집
• /
• 제23권9호
• /
• pp.627-632
• /
• 2011

As an innovative effort to secure economically viable heat recovery system, various fin shapes for industrial fin-tube heat exchangers have been studied for better performance. In this study, the waste gas heat recovery from four different fin shapes was experimentally performed for heat transfer rate and pressure drop. According to the tested results, the twist and wavy shape fins of rectangular type show the superior performance in terms of Goodness factor and jH/f factor ratio, whereas the circular spiral fin shows the inferior values. Experimental results shows good comparison with the numerical results with a slight discrepancy of 5%, which is quite resonable.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.128-130
• /
• 2003

As toughness-investigation to improve brittleness of existing epoxy resin, elastic-factor of elastic epoxy using TMA (Thermomechanical Analysis), DMTA (Dynamic Mechanical Thermal Analysis) and FESEM (Field Emission Scanning Electron Microsope) for structure-images analysis were investigated. A range of measurement temperature of the TMA, DMTA was changed from -20[$^{\circ}C$] to 200[$^{\circ}C$]. When modifier was ratio of 0[phr], 20[phr], 35[phr], glass transition temperature (Tg) of elastic epoxy was measured through thermal analysis devices. Also, it was investigated thermal expansion coefficient ($\alpha$), modulus and loss factor through DMTA. In addition, it was analyzed structure through FSSEM and made sure elastic-factor of elastic epoxy visually. As thermal analysis results, 20[phr] was superior than 30[phr] thermally and mechanically. Specially, thermal expansion coefficient, modulus, damping properties were excellent. By structure-images analysis through FESEM, we found elastic-factor of elastic epoxy that is not existing epoxy, and proved high impact.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.79-85
• /
• 2016

In this study, we proposed a new single-stage small power MH lamp electronic ballast and power-factor correction circuit with improved circuit by the current of passive power factor correction. Main circuit integrates traditional DC/DC and DC/AC circuits into one-stage DC/AC inverter. Moreover, we described the working principle and control strategy of the new circuit; it's soft switching principle; and resonant element parameter design formula. An experimental prototype of HID lamp electronic ballast with output power of 70 W was built to verify the feasibility of the analysis and design. The simulation and experimental results proved that the power factor of this circuit could reach 94%, with efficiency of 90%. The input current harmonics conform to IEC 61000-3-2 standards and its cost is low. These superior performances of the new circuit indicate certain practical values.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.457-463
• /
• 2018

This study examined the water absorption and drying properties of the thirteen types of the knitted fabrics for sports wear. These physical properties were analysed with relation to the constituent fiber cross-sectional shape and structure parameters of the knitted fabrics by regression analysis. Absorption and drying properties of the knitted fabric specimens were increased with increasing the porosity of the constituent yarns, which was attributed to the capillary channels in the yarns. The water absorption and drying properties were increased and decreased with increasing tightness factor and stitch density of the knitted fabric. The absorption property of the knitted fabric for perspiration absorption and fast dry sport-wear clothing was mostly influenced mostly by fiber cross-sectional shape and its characteristics, whereas, drying property was dependent on the structural parameters of the knitted fabric such as tightness factor and stitch density. Therefore, superior perspiration absorption and fast drying knitted fabric could be obtained in the fabric structure with optimum tightness factor and stitch density, and constituent yarn structure with non-circular fiber crosssection and high porosity. GATS method and MMT method are used to measure sweating fast drying properties and it is necessary to carry out studies using these measurement methods in order to compare with the results of this study.

• 한국음향학회지
• /
• 제38권3호
• /
• pp.283-289
• /
• 2019

RLS(Recursive-least-squares) 알고리즘은 수렴성이 좋고, 수렴 후 오차 수준도 우수한 것으로 알려져 있다. 그러나 알고리즘 내에 역행렬 계산이 포함되어 수치적 불안정성을 나타내는 단점도 있다. 본 논문에서는 언급한 불안정성을 회피하기 위해서 역행렬이 없지만 수렴성이 유사한 알고리즘을 제안한다. 이를 위해서 기울기 평균 벡터를 사용한 가변 스텝 최소 자승 알고리즘을 사용한다. 또 시변 채널 추정에 우수한 성능을 내기 위해서 계산량이 적은 가변 망각인자를 도입한다. 시뮬레이션을 통해서 기존 RLS와의 성능을 비교하고 그 유사성을 보인다. 또 시변 채널에서 가변 망각인자의 우수성도 보인다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.187-190
• /
• 2001

In this paper, we present a novel digital watermarking technique based on the concept of multiresolution decomposition and Human Visual System(HVS). Proposed watermarking is to embed watermark by quantization, that is to construct ‘perceptually lossless’quantization matrix, by using a quantization factor for each level and orientation and variance within a band. We compare our approach with another wavelet domain watermarking methods. Simulation results show the superior performance of robustness for variety image distortions.