• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.146-149
• /
• 2004

We have studied a liquid crystal (LC) mode (named locked super homeotropic (LSH)) in which the LCs aligned homeotropically are locked by surrounding walls such as cubic, hexagonal and cylinder. In the device, the vertically aligned LCs tilt down symmetrically around the center of the cell when a voltage is applied and thus it exhibits wide viewing angle. The structure of this LSH mode is suitable for large-sized display panels. since the LCs are locked in micro domains the LCs do not flow to the bottom of the panel by gravity. This mode is applicable to achieve high performance TFT-LCD TV because of high performance characteristics such as high contrast, high brightness, wide-viewing angle.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.275-281
• /
• 2010

This research's goal is to process directly aspherics with big sagment and thin center thickness. If we can process directly aspherics with big sagment and thin center thickness, we think it greatly helps to reduce the time of developing optical system. We made very thin glass using diamond grinding whetstone regarding the trace of tool and the detailed drawing of tool super precisive aspherics that has 0.46mm center thickness and over $30^{\circ}$ segment, $0.1{\mu}m$ machining accuracy, 15nm surface accuracy. We think this research's result will be effective to open new market because it is applied not only cell phone optical system but also CCTV robot optical system, internet phone optical system. Also we expect to enhance the super strong brittle precisive process's possibility with super precisive processing technique that achieves 0.46mm glass center thickness as first in the world.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.263-267
• /
• 2014

Super junction trench gate power MOSFETs have been receiving attention in terms of the trade-off between breakdown voltage and on-resistance. The vertical structure of super junction trench gate power MOSFETs allows the on-resistance to be reduced compared with conventional Trench Gate Power MOSFETs. The heat release of devices is also decreased with the reduction of on-resistance. In this paper, Lattice Temperature of two devices, Trench Gate Power MOSFET and Super junction trench gate power MOSFET, are compared in several temperature circumstance with the same Breakdown Voltage and Cell-pitch. The devices were designed by 100V Breakdown voltage and measured from 250K Lattice Temperature. We have tried to investigate how much temperature rise in the same condition. According as temperature gap between top of devices and bottom of devices, Super junction trench gate power MOSFET has a tendency to generate lower heat release than Trench Gate Power MOSFET. This means that Super junction trench gate power MOSFET is superior for wide-temperature range operation. When trench etching process is applied for making P-pillar region, trench angle factor is also important component. Depending on trench angle, characteristics of Super junction device are changed. In this paper, we focus temperature characteristic as changing trench angle factor. Consequently, Trench angle factor don't have a great effect on temperature change.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.107-107
• /
• 2004

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1185-1187
• /
• 2004

We have studied a liquid crystal (LC) mode, named locked super homeotropic (LSH), where the LCs aligned homeotropically are locked by surrounding walls such as cubic, hexagonal and cylinder. In the device, the vertically aligned LCs tilt down symmetrically around the center of the cell when a voltage is applied and thus it exhibits wide viewing angle. In addition, since the LCs is locked in micro domains the LCs do not flow to the bottom of the panel by gravity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.664-667
• /
• 2003

Super In Plane Switching (S-IPS) technology is applied for large TFT-LCD panels used in TV applications. It has a lot of advantages in comparison to the alternative, VA technology. S-IPS shows excellent viewing angle properties and fast response time between intermediate gray levels. If the performance parameters which describe the actual visual performance are considered, S-IPS is much more advantageous.$^{1)}$ However, it shows relatively low contrast ratio in diagonal direction compared to viewing angle characteristic in upper/down direction in S-IPS. In order to compensate the relatively low diagonal contrast ratio, a newly designed optical film was applied and the truly wide view angle of a S-IPS TW(True Wide)-IPS) was achieved. Our newly developed 30-inch TFT-LCD panel reveals TW-IPS that is optimized for TV application

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.51-59
• /
• 2013

It is usual to evaluate the performance of the cool roof by measuring in-site rooftop temperature using thermal infra-red camera. The principal advantage of rooftop thermal infrared image acquired in oblique vantage point of super high-rise building as a remote sensor is to provide, in a cost-effective manner, area-wide information required for a scattered rooftop target with different colors, utilizing wide view angle and multi-temporal data coverage. This research idea was formulated by incorporating the concept of traditional remote sensing into rooftop temperature monitoring. Correlations between infrared image of super high-rise building and in-situ data were investigated to compare rooftop surface temperature for a total of four different rooftop locations. The results of the correlations analyses indicate that the rooftop surface temperature by the infrared images of super high-rise building alone could be explained yielding $R^2$ values of 0.951. The visible permanent record of the oblique thermal infra-red image was quite useful in better understanding the nature and extent of rooftop color that occurs in sampling points. This thermal infrared image acquired in oblique vantage point of super high-rise made it possible to identify area wide patterns of rooftop temperature change subject to many different colors, which cannot be acquired by traditional in-site field sampling. The infrared image of super high-rise building breaks down the usual concept of field sampling established as a conventional cool roof performance evaluation technique.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.2
• /
• pp.10-26
• /
• 1986

In a stereoscopic measurements on the aerial photogrammetric works, it is in general understood that the larger and the larger is a vertical scale exaggeration, the better and the better is height measuring precision. Despite the success with which a stereoscopic measurement has been applied to contour mapping as well as spot height measurement, no generally accepted theory for visual excess has yet been developed. This experiments aim at arrangement of a correlation between visual excess and height measuring precision. The stereoscopic measurements with parallax bar in the mirror stereoscope are carried out on the test model of which consists normal angle, wide angle and super wide angle respectively. With the result of this experiments, it is conclued that height measuring precision is proportional to the magnitude of visual excess.

• Journal of Environmental Science International
• /
• v.20 no.10
• /
• pp.1309-1317
• /
• 2011

This study selected 6 river reach, which have various curved-channel, included in an object of study as making the Nakdong River, which is a real nature river, as a point of an object of study by using SMS RMA-2 model, a 2D numerical analysis model, and applied project flood and analyzed and examined characteristic of hydrological property and super-elevation, which includes characteristic of the velocity of a moving fluid. As a result, in a river reach, whose width is wide, angle of curved-channel has impact on the velocity of a moving fluid of inside of curved-channel and in a river reach, whose width is narrow, the radius of curvature and width of the river have impact on the velocity of a moving fluid of inside of curved-channel. Also it found out that the ratio of reduction in water-level of inside of curved-channel is more bigger than ratio of increasing in water-level of outside of curved-channel when project flood is increasing and angle of curve is increasing. Based on this, this study would be used as a expectation of danger and preliminary data in planning real river or a business, that creates an environment.

• Information Display
• /
• v.6 no.4
• /
• pp.11-21
• /
• 2005

평판 디스플레이 장치가 LCD-TV에 사용되는 경우 시야각 특성과 동화상 성능은 보다 중요한 성능이 된다. 전반적인 LCD의 화질 특성은 시야각 특성과 동화상 응답 속도를 제외한 모든 부문에서 경쟁 기술보다 우세하다. 이러한 디스플레이의 시야각 특성을 개선하기 위해 LCD업계에서는 IPS, MVA, PVA 등 시야각 특성이 개선된 광시야각 액정 Mode를 개발하여 사용하고 있지만 여전히 LCD는 자발광 디스플레이에 비하여 측면 시인성 측면으로 열세에 있었다. 최근에는 LCD의 측면 시인성을 획기적으로 개선 할 수 있는 기술이 개발되어 더 이상 LCD-TV 응용에서 문제가 되지 않을 수준이 되고 있다. 본 논문에서는 여러가지 광시야각 액정모드 LCD의 측면 시인성 향상 기술에 대한 개략적인 사항을 알아보고, 그 중 Super PVA 액정 기술의 기본원리와 동작 방법에 대하여 상세히 기술하기로 한다.