• Korean Journal of Acupuncture
• /
• v.22 no.1
• /
• pp.7-21
• /
• 2005

Objectives : In the present study, the effect of electroacupuncture (EA) applied to SI6 and won-rak point on the ankle sprain model was examined. A common source of persistent pain in humans is the lateral ankle sprain. Methods : To model this condition, the rat's right ankle was bent repeatedly, overextending lateral ligaments, for 4 min under enflurane anesthesia. The rat subsequently showed swelling of the ankle and a reduced stepping force of the affected limb for the next several days. The reduced stepping force of the limb was presumably due to a painful ankle. EA was applied to the several acupuncture point on the contralateral forelimb for 30 min under gaseous anesthesia. After the termination of EA, behavioral tests measuring stepping force and Paw volume were Periodically conducted during the next 4 h and 18 h respectively. Results : EA applied to $SI_6$ with won-rak point produced more powerful improvement of stepping force of the sprained foot than to $SI_6$ alone lasting for at least 4 h. However, neigher $KI_4$ point nor $BL_{64}$ point produced any significant increase of weight bearing force. The improvement of stepping pressure was interpreted as an analgesic effect. The analgesic effect was specific to the acupuncture point since the analgesic effort on the ankle sprain pain model could not be mimicked by EA applied to $KI_4$ or $BL_{64}$. In addition, EA applied to $SI_6$ with won-rak combination point showed inhibitory effect on the paw edema induced by ankle sprain. Also, COX-2 protein expression increased by ankle sprain were suppressed by the EA stimulation. Conclusion : These data suggest that EA with won-rak combination point produces a more potent analgesic effect on the ankle sprain pain model in the rat and that EA with won-rak combination point induced anti-inflammatory effect through the suppression of COX-2 protein expression.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.3
• /
• pp.133-142
• /
• 2022

PURPOSE. A large number of studies have suggested the practicability and predictability of immediate implant function, but few studies have reported marginal bone level changes during sequential loading periods. The purpose of this study was to evaluate the marginal bone remodeling of immediately loaded self-tapping implants both at each time point and during each loading period between two time points. MATERIALS AND METHODS. The patients included in this retrospective study were treated with immediately loaded NobelSpeedy Replace implants between August 2008 and July 2009. Differences in the marginal bone level (MBL) at each time point and the marginal bone level change (ΔMBL) between two time points were analyzed with Bonferroni correction (P < .05). RESULTS. Overall, 24 patients (mean age, 47.3 ± 12.8 years) with 42 immediately loaded implants and a median follow-up of 6.5 years (IQR, 67.8 months) were included. The cumulative survival rate after 10 - 12 years was 95.2%. Continuous but slow marginal bone loss was observed during long-term follow-up. MBL at both 7.5 years and 11 years was significantly lower than that at loading, 6 months, 2 years and 4 years (P < .05). No bone loss difference was found in any period before 4 years of follow up (P > .05). The loading period of 4 years to 7.5 years showed the largest ΔMBL compared to those of other time periods (P < .05). CONCLUSION. Slight bone loss occurred continuously, and more radical changes of marginal bone can be observed during the period of 4-7.5 years. Thus, long-term effective follow-up of immediately loaded implants is needed.

• Korean Journal of Acupuncture
• /
• v.24 no.2
• /
• pp.113-127
• /
• 2007

Objectives : To inform the 5th WHO Informal Consultation meeting on Development of International Standard Acupuncture Point Locations, held in Osaka, Japan, on September $27{\sim}29$, 2005. Results and Conclusions : Nine experts from Korea, China and Japan discussed the principles of acupuncture points locations and the point locations of 33 controversial acupoints that were not agreed at the previous meeting, as well as 328 non-controversial points that all 3 nations agreed on the locations to confirm the expression of every single point. Through this meeting, the locations of ST30, SP12, LR7 and expressions of LU6, LI8, LI9, LI10, LI 13, SP13, BL60, KI3, GB38, LR11, LR12 were agreed. Furthermore, locations of BL39, GB27, GB28 were confirmed out of 6 non-discussed points. However, several points were still required to held additional meeting to discuss. That includes LI19, LI20, ST36, ST37, ST38, ST39, SI6, KI9, PC8, PC9, TE9, TE17, TE23, GB7, GB30, GV26. In addition, foundation for the international society for the acupuncture point location was proposed to make a regular revision of standard acupuncture point location.

• Korean Journal of Occupational Health Nursing
• /
• v.15 no.2
• /
• pp.83-93
• /
• 2006

Purpose: This study purposed on investigating how the emotional labor affects the physical uncomfortable feeling of the workers in the department store. Method: The method of data collection was used of questionnaire for 574 workers of one department store located in Seoul. The period of data collection was done from November 1, 2004 to November 30 for about one month. The working career of the participants was over one month at that department. Result: The degree of emotional labor for participants, men were $3.21{\pm}0.53$ for the total point of 5.0 point, and the degree of the physical uncomfortable feeling was $3.07{\pm}0.48$ for total of 5.0 point. The degree of emotional labor for participants, women were $3.22{\pm}0.42$ for the total point of 5.0 point, and the degree of the physical uncomfortable feeling was $3.13{\pm}0.42$ for total of 5.0 point. In order to analyze the factors that affected the emotional labor and physical uncomfortable feeling, the multi-level reflecting analysis was used. As a result, men were insecurity of job influenced the emotional labor feeling in remarkable degree, women were the responsibility of job influenced the emotional labor. Men were insecurity and responsibility of job influenced physical uncomfortable feeling in remarkable degree, women were responsibility of job and emotional labor influenced the physical uncomfortable feeling in remarkable degree. Conclusion: The results of this study show that various strategies to remove the factors of job insecurity in order to reduce the level of emotional labor of the workers at the department store should be devised. In addition, the special way to minimize the physical insecurity should be contrived and carried out. Since the workers of the department stores had higher emotional labor, the factors of stress need to be analyzed and should be removed.

• Journal of Korean Clinical Nursing Research
• /
• v.19 no.2
• /
• pp.245-254
• /
• 2013

Purpose: This study was done to examine predictive validity of Critical Care Non-verbal Pain Scale (CNPS) and develop criteria for pain assessment using CNPS with critically ill patients who have communication problems. Methods: Data were collected from intensive care units at three major general hospitals in Seoul and Kyunggi province. During each observation, a nurse assessed pain severity using CNPS ratings (range 0-9) at four treatment stages: at rest, during central catheter dressing change (nonpainful procedure), position change and suctioning (routine painful procedures). Patients also assessed their pain using a self-report 4-point VRS-4. Results: There were significant differences between the four treatment stages except between "at rest" and "nonpainful procedure". Strong correlations were found between CNPS and VRS-4 for "at rest" (r=.552, p<.001), central catheter dressing change (r=.505, p<.001), position change (r=.709, p<.001), and suctioning (r=.662, p<.001). ROC curve analysis of CNPS based on 3 point on VRS-4 showed the cutoff point was 3 for CNPS, the starting point for pain management with 73% sensitivity, 92.2% specificity, 73% positive predictive value, and 92.8% negative predictive value. Conclusion: Results indicate that CNPS is a valid tool for measuring pain in critically ill patients with communication problems and 3 point should be the standardized pain treatment point.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.235-243
• /
• 2018

The national geodetic control point is very important as a framework for drafting plans for construction and civil engineering works as well as mapping for various development and utilization plans related to the national land. Since the 1910s, Korea has established and managed the national geodetic control points, the triangulation points and the benchmarks. Currently, these point information is provided through the land information platform. The national geodetic control point has been changed through the process of loss, re-establishment, and re-location by the events and environment of the times. Therefore, it is very important to provide information by linking these past national geodetic control points in time series. In this study, we classified the triangulation points into five groups(Japanese Government General of Korea, YUCCA Project, National Construction Institute, Past Control Point Data Sheet, and Current) by age and then suggests a method to match the same control points in each time period. Finally we also applied the proposed method to Jecheon and analyzed the results.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.193-198
• /
• 2011

This study aimed to provide basic data for permeable pavement application upon design and installation stages by analyzing the effect of permeable pavement used on the facility area rather than using non-point pollutants treatment facility upon development business in accordance with recent trend. To perform this study, the area of development target was separately applied as impermeable and permeable developments so as to compare and analyze the economics of cut pollution load and installation construction cost. Consequently, the processing amount and cut load of non-point pollutant sources are influenced much by permeable and impermeable developments, and it was turned out to be better to develop target river area as permeable area rather than installing non-point pollutants treatment facility of equipment type or natural type upon development to yield smaller discharge load. If we can prepare a countermeasure regulating impermeable area ratio to certain level to manage non-point pollutants upon development based on this result, we can minimize the source of pollution caused by the development.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.2
• /
• pp.69-77
• /
• 2006

Photovoltaic is an attractive technology to remote power applications, because of its reliability, low maintenance, and zero fuel requirements. In this paper represents residential PV system based on BESS(battery energy storage system) for managing the electric power, a pattern of daily operation considering the load characteristics of the house, the generation characteristics of PV power, and utility power leveling. For apply to control algorithm, we consider the load on monthly power consumption trend and daily usage pattern. As for the control of the proposed system, to increase the conversion efficiency of the PV power, bidirectional converter is used for MPPT and SPWM inverter. An experimental system is implemented, and some experimental results are provided to demonstrate the effectiveness of the proposed system.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1599-1602
• /
• 2002

$Zn_4SnSe_6$ and $Zn_4SnSe_6:Co^{2+}$ single crystals were by the chemical transport reaction method. They crystallized in the monoclinic structure. The direct energy band gaps of the $Zn_4SnSe_6$ and $Zn_4SnSe_6:Co^{2+}$ single crystals at 289K were found to be 2.146eV and 2.042eV. Optical absorption due to impurity in the $Zn_4SnSe_6:Co^{2+}$ single crystal was observed and described as originating from the electron transition between energy leveles of $Co^{2+}$ sited at $T_d$ symmetry point.