• Journal of Korean Society for Quality Management
• /
• v.20 no.1
• /
• pp.11-21
• /
• 1992

The Purpose of this paper contribute to design the multistate Markov process for the reliability of a system when the transition-rates of each unit depend on the current state of the system. The system transition-rate matrix has the form of the kronecker sum of transition rate matrices for the units, is analyzed and investigated. As a result, the system which has the state-dependent units is detaily analyzed and introduced by the approach of an algorithm for the system transition-rate matrix based on the kronecker algebra.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.47-52
• /
• 2010

Many industrial accidents have occurred over the years in the manufacturing and construction industries in Korea. However, as the service industry has increased continuously, the share of the accident rate in the service industry was 39.07% in 2009, while the manufacturing industry share was 33.73%. The service industry share overtook the manufacturing industry share for the first time. Therefore, this research considers prevention of industrial accidents in the service industry as well as manufacturing and construction industries. This paper describes a procedure and a method to estimate efficient accident rate forecasting and estimated zero accident time in the service industry in order to prevent industrial accidents in the transportation, storage, and telecommunication divisions. This paper proposes a model using an analytical function for the sake of very efficient accident rate forecasting. Accordingly, this paper has develops a program for accident rate forecasting, zero accident time estimating, and calculation of achievement probability through MFC (Microsoft Foundation Class) software Visual Studio 2008 in the transportation, storage, and telecommunication divisions. In results of this paper, ARIMA (Auto Regressive Integrating Moving Average) is regarded as a very efficient forecasting model for the transportation, storage, and telecommunication division. In testing this model, value minimizing the Sum of Square Errors (SSE) was calculated as 0.2532. Finally the results of this paper are sure to help establish easy accident rate forecasting and strategy or method of zero accident time in the service industry for prevention of industrial accidents.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.849-864
• /
• 2022

In case of a specific sector being divided into sub-sectors, this study presents a process for estimating an input-output table, which is frequently used as basic data in fields of energy and environment economics. RAS method, which is universally used for this case, requires information on production, intermediate input sum, and intermediate demand sum for each sector in the new table. But in many cases, it is difficult to secure information on intermediate demand sum by sector. This study suggests a process for estimating a new input-output table without using information of intermediate demand sum in the case of sector separation, under the assumption that information of production value and intermediate input sum by sector are available. The key idea is that the values of many elements in the input-output table after disaggregation are the same as those in the table before disaggregation and that the sum of the elements after disaggregation, equals the values of the elements before disaggregation. The process of estimating the intemediate transaction matrix or the input coefficient matrix is presented by using these information instead of intermediate demand sum information. A small-scale simulation shows that the average error rate of the process proposed in this study is about 11.23% in estimating input coefficients, which is smaller than the 11.30% estimation error of RAS using the information of intermediate demand sum. However, since it is known in the literature that using additional information does not always improve estimation performance compared to not using it, additional research on various simulations is needed to apply the method of this study to reality.

• Journal of Environmental Health Sciences
• /
• v.33 no.4
• /
• pp.255-263
• /
• 2007

Indoor air quality is the dominant contributor to total personal exposure because most people spend a majority of their time indoors. The purposes of this study were to evaluate the alternative method for improvement of indoor air quality in house after coating titanium dioxide ($TiO_2$) photocatalyst for interior part of the house using nitrogen dioxide ($NO_2$) multiple measurements. To evaluate the alternative method in indoor environment, daily indoor and outdoor $NO_2$ concentrations of an apartment and a detached house were daily measured for consecutive 21 days in winter and summer, respectively, Another daily 21 measurements were carried out after $TiO_2$ coating on wall paper of interior part in houses. All $NO_2$ concentrations were measured by passive filter badges. Indoor air quality models using mass balance are useful tool to quantify the relationship between indoor air pollution levels, ambient concentrations, and explanatory variables. Using a mass balance model and linear regression analysis, penetration factor (ventilation rate divided by sum of ventilation rate and decay rate) and source strength factor (emission rate divided by sum of ventilation rate and decay rate) were calculated. Subsequently, the decay constants were estimated. In this study. magnitude of improvement of indoor air quality could be evaluated by decay constant.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.59-65
• /
• 1996

This paper proposes a 4 kbps PSI-VSELP(Pitch Synchronous Innovation-Vector Sum Excited Linear Prediction) speech coder which produces speech equivalent to that of the conventional 4.8 kbps VSELP. Since the 'half-rate' is differently defined from country to country, there may be a need to reduce the bit rate of conventional half-rate coder. To minimize the degradation of speech quality caused by bit-rate reduction, it is desirable to perform bit-allocation based on the carefull consideration of the effect of various transmission parameters. This paper adopts this analytical approach for bit-allocation at 4 kbps. To improve the quality of the VSELP coder at 4 kbps, basis vectors which play the most important role in the performance, are optimized by an iterative closed-loop training process and the PSI technique is employed in the VSELP performance, are optimized by an iterative closed-loop training process and the PSI technique is employed in the VSELP coder. To demonstrate the performance of the proposed speech coder, we peformed experiments under the noiseless and error free conditions. From experimental results, even though the proposed 4 kbps PSI-VSELP coder showed lower scores in the objective measure, higher scores in subjective measure was obtained compared with those of the conventional 4.8 kbps VSELp.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.10
• /
• pp.299-308
• /
• 2023

As the spectrum shortage problem has accelerated by the emergence of various services, New Radio-Unlicensed (NR-U) has appeared, allowing users who communicated in licensed bands to communicate in unlicensed bands. However, NR-U network users reduce the performance of Wi-Fi network users who communicate in the same unlicensed band. In this paper, we aim to simultaneously maximize the fairness and throughput of the unlicensed band, where the NR-U network users and the WiFi network users coexist. First, we propose an optimal power allocation scheme based on Monte Carlo Policy Gradient of reinforcement learning to maximize the sum of rates of NR-U networks utilizing rate-splitting multiple access in unlicensed bands. Then, we propose a channel occupancy time division algorithm based on sequential Raiffa bargaining solution of game theory that can simultaneously maximize system throughput and fairness for the coexistence of NR-U and WiFi networks in the same unlicensed band. Simulation results show that the rate splitting multiple access shows better performance than the conventional multiple access technology by comparing the sum-rate when the result value is finally converged under the same transmission power. In addition, we compare the data transfer amount and fairness of NR-U network users, WiFi network users, and total system, and prove that the channel occupancy time division algorithm based on sequential Raiffa bargaining solution of this paper satisfies throughput and fairness at the same time than other algorithms.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.549-554
• /
• 2022

Life table-related studies in insect ecology have been an interesting topic for insect researchers. Two calculation methods are commonly applied to estimate the intrinsic rate of natural increase (r_m) in the life table statistics. The first method is to estimate an approximate r_m by dividing the natural logarithm of the net reproductive rate (R₀) by mean generation time (T) (namely mean generation time-based method). Another approach is to apply the Lotka-Euler equation derived from the population growth equation of Lotka-Volterra to estimate accurate r_m using the maximum likelihood method (Lotka-Euler equation-based method). In the latter case, there is a difference in the estimated r_m value when the initial age class of the target cohort was set to "0" or "1", which confused the application. In this short review, a brief history of the calculation process of the life table was reviewed. It was again confirmed in the Lotka-Euler equation-based method that the form of $\sum\limits_{x=1}^{w}e^{-rx}l_xm_x=1$ should be applied to estimate r_m when the first age class was set to zero, while the form of $\sum\limits_{x=0}^{w}e^{-r(x+1)}l_xm_x=1$ when set to one.

• Communications for Statistical Applications and Methods
• /
• v.5 no.3
• /
• pp.707-722
• /
• 1998

This paper evaluates a new clinical trial designs for low infection rate disease. This type of sparse disease reaction makes the traditional two sample t-test or Wilcoxon rank-sum test inefficient compared to a new test suggested. The new test, which is based solely on the larger changes, is shown to be more effective than existing method by simulation for small samples. However, this test can be shown to be connected to the locally most powerful rank test under certain practical conditions. This design is motivated in testing the treatment effects in periodontal disease research.

• Proceedings of the KSPS conference
• /
• 2003.05a
• /
• pp.187-190
• /
• 2003

The purpose of this paper is to research the phonetic parameters used on the voice imitation. First of all, the fundamental frequency is imitated effectively. Distinctive prosodic patterns are used repeatedly on the voice imitation. Speaking rate is used in special measure in case the target speaker has extraordinary speaking rate. Also formant frequency is imitated variously. In sum, distinctive characteristics perceived by listener are used on voice imitation.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.213-217
• /
• 1988

A new paradigm for the viscosity of fluid is presented by considering the fact that the viscosity is equal to the shear stress divided by the shear rate. The shear stress is obtained from the sum of kinetic and internal pressures of fluid, and the shear rate is found from the phonon velocity divided by the mean free path of the phonon. The calculated viscosities for various simple substances are in excellent agreements with those of the observed data through the wide temperature range covered both of liquid and gas phase.