• 자원환경지질
• /
• 제8권3호
• /
• pp.165-168
• /
• 1975

The grade and recovery rate and its sulphur content of iron concentrate compared respectively as varied with redcued size using the Crocket Magnetic Separator and the Wet-Drum-Magnetic Separator in the magnetic separation test of iron ore from Yangyang mine. The content of sulphur was decreased distinctly as the size was finer. In case of the sample of -100 mesh, using the Crocket Magnetic Separator, the sulphur content of iron ore was decreased to 0.10% and its grade increased to 67.0%, but the recovery rate was no more than 85.1%. In the Wet-Drum type, the grade and the recovery rate of concentrate was better than those in the Crocket Magnetic Separation, but the content of sulphur was more than that in the Crocket Magnetic Separation. The Crocket type is suitable for less sulphur content while the Wet-Drum Magnetic Separator is suitable for better the grade recovery rate of the magnetic concentrate.

• 한국주조공학회지
• /
• 제14권6호
• /
• pp.520-529
• /
• 1994

This study describes the influence of the trace amount of sulphur on the nucleation behavior of graphite crystals in high purity Fe-C-Si alloys prepared by levitation melting method. Detailed microstructural analyses of high purity(HP) and sulphur added(HP＋S) samples showed that the nucleation of graphite crystals was prevented by sulphur. With decreasing the sulphur content, the shape of graphite crystals tended to spherulitic, and below 2ppm S, that of graphite crystals was only nodular. The critical cooling rate for the nucleation of griphite crystals was calculated as $1.5{\times}10^3k/s$. It is obvious from this work that residual C-C clusters act as an effective nucleation site for graphite crystals and one of the important role of nodularizing elements is to act as scavenger which removes harmful impurities from the solution.

• Archives of Metallurgy and Materials
• /
• 제65권1호
• /
• pp.349-355
• /
• 2020

Copper slag differs by chemical composition and structure, depending on the type of processing. Copper slag typically contains about 1 wt.% copper and 40 wt.% iron depending upon the initial ore quality and type of furnace used. The aim is to produce a typical foundry pig iron with the chemical composition of C > 3.40 wt.%, Si 1.40 to 1.80 wt.%, Mn 0.30 to 0.90 wt.%, P < 0.03 wt.% and S < 0.03 wt.% from copper slag. But foundry pig iron manufactured from copper slag contains a high sulphur content. Therefore, this study examines how to conduct desulphurization. Desulphurization roasting and reduction smelting with desulphurization additives used to remove sulphur from the copper slag. The results showed that desulphurization effect of desulphurization roasting is poor but when combined with reduction smelting with CaO addition is possible to manufacture low sulphur pig iron from copper smelting slag.

• 전기의세계
• /
• 제26권2호
• /
• pp.95-98
• /
• 1977

Commercially available fuel oil for power plant contains relatively much sulphur, which means accordingly high content sulphur deoxide in exhaust gas. Sulphur deoxide has been identified as the worst-pollutant caused by thermal power generation. This paper primarily deals with the stack gas diffusion effects of various parameters, namely vertical stability, wind velocity, exhaust gas velocity, stack height, etc., on the ground concentration. thereof the relation between stack height and maximum plant capacity is analyzed from the standpoint of air pollution prevention. The limit capacity is calculated by means of mean concentration introducing Mead and Lowry coefficient respectively.

• Journal of Welding and Joining
• /
• 제7권2호
• /
• pp.49-59
• /
• 1989

The effect of non-metallic inclusions on the HAZ hydrogen induced cracking was investigated. Quench and temper high tensile strength steels containing various sulphur contents were employed. The sulphur contents range between 0.007% and 0.040%. Non-metallic inclusions were mainly MnS type sylphide and Mn-Al-Si type. The sensitivity of HAZ delayed cracking was evaluated by implant testing. Diffusible hydrogen content was varied by controlling the moisture absorbing condition of manual arc welding electrodes. The one was asreceived condition, the other was dipping the electrodes in the water for ten minutes. The main results obtained were as follows; 1) The results of implant test showed that critical stress increased with increasing S content up to 0.013%. But steel containing 0.040%S showed lower critical stress than that of 0.013% S. These result suggest that there will be optimum S content to prevent HAZ delayed cracking of high strength steels. 2) Under the lower D.H.C. level, critical stress was increased with rolling reduction, but higher D.H.C. level, effect of rolling reduction was not recognized.

• 한국토양비료학회지
• /
• 제31권1호
• /
• pp.72-76
• /
• 1998

일반토양과 시설재배지 토양을 공시하여 1l 광구병에 토양 600g씩 충진하고 토양 1kg당 양송이퇴비, 계분퇴비, 돈분퇴비, 어분퇴비를 각각 0, 10, 20, 30, 40, 50g상당량을 시용하였다, 온도를 10, 20, 30, $40^{\circ}C$로 조절하고 중류수를 토양 1kg당 50, 100, 200, 300ml 첨가하여 각 처리별 아황산가스 발생량을 조사하여 다음과 같은 결과를 얻었다. 아황산가스 발생량은 황함량이 적은 양송이퇴비, 계분퇴비 및 돈분퇴비에서는 적었으나 황함량이 많은 어분퇴비 처리구에서는 10g/kg처리에서 부터 매우 큰 차이로 증가 되었다. 어분퇴비처리구는 10g이하에서도 시 용량증가에 따라서 아황산가스 발생량이 현저히 증가되었고, 황함량이 적은 일반토양보다 황 함량이 많은 시설재배지 토양에서 가스발생량이 높았다. 아황산가스 발생량은 온도가 높을수록 증가되었으며, 수분 처리별로는 150ml 첨가구에서 가장 많이 발생되었다.

• 한국초지조사료학회지
• /
• 제10권3호
• /
• pp.141-146
• /
• 1990

Changes in dry matter yield, crude components, nutrients uptake($P_2O_5$, $K_2O$, CaO, MgO) and sulphur containing amino acid(cysteine, methionine) of orchardgrass(Dacty1is glomerata. L) and alfalfa(A4edicago sativa. L) by gypsum application(as sulphur source, 0, 2. 5, 10, 20kg SIlOa) were investigated to understand the effect of sulphur on herbage production in pasture, which was established in 1987 as means of hand broadcasting. The effect of gypsum on dry matter yield at different cutting times during growing seasons has not been found both in orchardgrass and in alfalfa, but in respect to annual total dry matter yield there were increment in herbage yield (P<0.05) of alfalfa at 5, 10, 20kg SIlOa in 1989 and the amounts of sulphur taken up in herbage slightly increased according to the rates of gypsum application. Maximum apparent recovery of sulphur was 7.55% at 2kg SIlOa in orchardgrass and was 17.8% at 5kg S/lOa in alfalfa. There were no any great differences in the content of crude components of both species and this trend was similar with the mineral contents of orchardgrass. But in alfalfa, the amounts of $K_2O$, CaO, and $P_2O_5$ taken up were increased by gypsum application and the increment in the amounts of minerals taken up in herbage at 20kg SIlOa were 14.9 of $K_2O$, 9.1 of CaO, and 2.5kgIlOa of $P_2O_5$ as compared to those of at untreated plot. Cysteine and methionine were not influenced by gypsum applicaton not only in orchardgrass but also cysteine in alfalfa, however, the content of methionine in alfalfa was slightly increased at 2, 5, lOkg SIlOa and at 20kg SIlOa was reverse.

• 한국작물학회지
• /
• 제51권6호
• /
• pp.519-522
• /
• 2006

Randomized field experiments were conducted to study the interactive effect of sulphur (S) and nitrogen (N) on seed, oil and protein yield of two cultivars of groundnut {Arachis hypogea: cv Amber $(V_{1})$: cv Kaushal, $(V_{2})$.} Two dosage levels of sulphur ($0\;and\;20kg\;ha^{-1}$) and two dosage levels of N ($23.5\;and\;43.5kg\;ha^{-1}$) in various combinations were tested as micronutrient treatments, $T_{1},\;T_{2},\;and\;T_{3}$. Results indicated significant enhancement of the yield components namely seed and oil yield as well as seed protein. Maximum response was observed with treatment $T_{3}$(having 20kg S and 43.5kg N $ha^{-1})$. Increase in seed and oil yields of 90% and 103% in $V_{1}$, and 79 and 90% in $V_{2}$, respectively were recorded as compared to the control treatment $T_{1}$(having 0kg S and 23.5kg N $ha^{-1}$). Effect of S and N interaction was observed on protein, N and S content in seeds. The results obtained by these experiments clearly suggest that judicious balanced application of N and S could improve the yield.

• 한국자원식물학회지
• /
• 제27권4호
• /
• pp.354-358
• /
• 2014

유황과 벤토나이트의 특성을 고려하여 적정 비율로 혼합한 유황벤토나이트 혼합비료를 기비로 $1000m^2$당 3 kg과 6 kg, 그리고 무처리로 구분하여 시비하고 열무를 재배하여 토양의 화학성 변화와 작물생육의 효과를 시험하였다. 그 결과 토양의 pH는 시비량이 증가할수록 약간씩 낮아지는 경향을 보였으나 큰 하락을 나타내지 않았다. 토양내 전질소 함량은 $6kg/1000m^2$ 처리구에서 700 mg/kg으로 가장 높았으며, 유기물 함량은 $3kg/1000m^2$ 처리구에서 1.29%로 가장 높았다. 토양중 유효인산의 함량은 시비량의 증가에 따라 높아져 $6kg/1000m^2$ 처리구에서 289 mg/kg으로 조사되었다. 열무의 지상부는 $3kg/1000m^2$ 처리구, 지하부는 $6kg/1000m^2$ 처리구에서 더 크게 생장하였다. 따라서, 유황벤토나이트 혼합비료의 시비시 토양 화학성 및 작물생육 증진에 효과가 있는 것으로 판단된다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.115-116
• /
• 2006

보다 깨끗한 환경에서 살고 싶어 하는 인류의 욕구가 육상의 대기 배출물뿐만 아니라 선박까지도 보다 깨끗한 배기를 요구하기에 이르렀다. 이러한 요구에 부응하여 IMO(국제해사기구)뿐만 아니라 EU(유럽연합)과 미국 등에서 규제를 이미 시작하였거나 시작할 예정이다. 또한 많은 선급에서도 약 10년 전부터 자발적인 규칙을 도입해오고 있다. 그리고 스웨덴은 인센티브제를 오래 전부터 적용해오고 있다. 이러한 규제, 선급 규칙 및 인센티브제는 질소산화물, 황산화물 및 입자상물질 배출에 제한을 가하는데, 황산화물 및 입자상물질 배출 제한은 간접적으로 연료유에 함유되어 있는 황 함량 규제를 통하여 하고 있거나 하려고 한다. 여기에 이러한 규제, 선급 규칙 및 인센티브제에서 가하고 있거나 가할 예정인 선박 디젤기관 연료유의 황 함량 규제에 대하여 간략하게 소개한다.