• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.1-6
• /
• 2006

In this study we proposed on effect of the photodecomcomposition of coated nanofiber by $Pd/TiO_2$ for the removal of formaldehyde gas as indoor air pollutant. The photocatalytic reactor was setup in the inside of rectangular box (volume 2 l), UV lamp and the coating nanofiber with $Pd/TiO_2$. This study investigated the reaction rate and the adsorption constant of Langmuir-Heinshelwood, conversion of formaldehyde gas on temperature ($40^{\circ}C{\sim}80^{\circ}C$), effect of conversion (%) under different concentration, and effect of conversion (%) with humidity level on added $SO_2$ gas. As results, the rate constant (k) and adsorption constant (ft) were 114.94ppmv/min, $0.0036ppmv^{-1}$, respectively. and the conversion (%) of formaldehyde gas on temperature ($40^{\circ}C{\sim}80^{\circ}C$) was decreased to about 24%, compare with the first conversion (%). In conversion effect of increasing humidity levels, the presence of sulfur dioxide further decreased than without sulfur dioxide. the decreasing reason of conversion with presence sulfur dioxide judged as a cause of interference factor on the decrease of contact chance with photocatalysts.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.2
• /
• pp.191-199
• /
• 1999

Objectives: To examine the relationship between air pollution exposure and mortality in Seoul for the years of 1991-1995, Methods: Daily counts of death were analyzed by general additive Poisson model, with adjustment for effects of secular trend, seasonal factor, day of the week, heat wave, temperature, and humidity. Pollution variables were ozone, nitrogen dioxide, total suspended particles(TSP), and sulfur dioxide. Results: Daily death counts were associated with ozone(1 day before), nitrogen dioxide(1 day before), TSP(2 days before), sulfur dioxide(2 days before). The association with ozone was most statisfically significant and independent of other air pollutants. Increase of 100 ppb in ozone was associated with 0%(95% Cl= 2%-10%) increase in the daily number of death, This effect was greater in persons aged 65 and older. The relative risks of death from respiratory disease and cardiovascular disease were greater than for all-cause mortality in each pollutant. After ozone level exceeds 25 ppb, the dose-response relationship between mortality and ozone was almost linear. However, the effect of TSP, sulfur dioxide, and nitrogen dioxide on mortality might be confounded with each other. Conclusion: Daily variations in air pollution within the range currently occurring in Seoul might have an adverse effect on daily mortality.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.3
• /
• pp.272-283
• /
• 2003

Mild steel and zinc specimens were tested in five atmospheric testing sites of Vietnam in order to collect the corrosion databank as well as to study the corrosion mechanism in tropical conditions, in period of 1997-2000. The results obtained showed that the corrosion rate of steel is in the range of $10-50\;{\mu}m/year$ and of zinc is of $1-5\;{\mu}m/year$. They are interpretable in the comparison with the data obtained in different countries in the South East Asian as well as previous reports of Vietnamese nation project In atmospheric corrosion. The main factors affecting the corrosion in Vietnam tropical conditions are TOW (time of wetness) and salinity. The relationship between sulfur dioxide and corrosion of metals, particularly, zinc was not found clearly. An explanation was suggested about the complex effect of different pieces present in tropical atmosphere and about the alternative of the dominant factors such as humidity, salinity or temperature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.17-21
• /
• 1991

The study was performed to investigate the effects of gaseous emission of sulfur dioxide and hydrogen fluoride on the growth of rice plant under stressed field conditions. This study is specifically dealt with multiple effects of sulfur dioxide and hydrogen fluoride on various plant growth indicators such as leaf damage, weight of grain, panicles per hill, spikelets per panicle and percent fertility. It appears that there is a good correlation between ambient concentrations of sulfur oxides and sulfur contents found in leaves with an average correlation coefficient of 0.868 within a 1% significance level. A better multiple correlation was found between percent leaf damage and sulfur and fluorine contents found in leaf with a significance of 1% level. The correlation coefficient ranges from 0.807 to 0.978 with an average being 0.922. An evaluation of data observed has demonstrated that both panicles per hill and percent fertility are significantly affected by air pollutants. As expected, hydrogen fluorides have more effects than sulfur oxides. It is, however, interesting to note that spikelets per panicle has slightly been affected while no indication of effects on l000-grain weight has been observed. This may lead to a conclusion that a reduction in yield of rice under polluted field conditions may have more been caused by the diminution panicles per hill and percent fertility rather than by the diminution of spikelets per panicle and grain weight.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.4
• /
• pp.594-598
• /
• 2012

Polymer electrolyte membrane fuel cell(PEMFC) performance degrades seriously when sulfur dioxide and hydrogen sulfide are contaminated in the fuel gas at anode and air source at cathode, respectively. This paper reveals the effect of the combined sulfur impurity poisoning on both PEMFC cathode and anode parts through measuring electrical performance on single FC operated under 1 ppm to 10 ppm impurity gases. The severity of $SO_2$ and $H_2S$ poisoning depended on concentrations of impurity gases under optimum operating conditions($65^{\circ}C$ of cell temperature and 100 % relative humidity). Sulfur adsorption occured on the surface of Pt catalyst layer on MEA. In addition, MEA poisoning by impurity gases were cumulative. After four consecutive poisonings with 1, 3, 5 to 10 ppm, the fuel cell performance of PEMFC was decrease upto 0.54 V(76 %) from 0.71 V.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.6
• /
• pp.487-495
• /
• 1997

The most desirable diesel oxidation catalyst (DOC) should have the properties of oxidizing CO, HC and SOF effectively at low exhaust gas temperature while minimizing the formation of sulfate at high exhaust gas temperature. Precious metals such as platinum and palladium have been known to be sufficiently active for oxidizing SOF and also to have high activity for the oxidation of sulfur dioxide $(SO_2)$ to sulfur trioxide $(SO_3)$. There is a need to develop a highly selective catalyst which can promote the oxidation SOF efficiently, on the other hand, suppress the oxidation of $SO_2$. In this study, a Pt-V catalyst was prepared by impregnating platinum and vanadium onto a Ti-Si wash coated ceramic monolith substrate. A prepared Pt-V catalytic converter was installed on a heavy duty diesel engine and the effect of fuel sulfur on particulate matter (PM) of heavy duty diesel engine was measured. The effect of fuel sulfur on PM of Pt-V was also compared with that of a commercialized Pt catalyst currently being used in some of the heavy duty diesel engines in advanced countries. Only 1 $\sim$ 3% of sulfur in the diesel fuel was converted to sulfate in PM for the engine without catalyst, but almost 100% of sulfur conversion was achieved for the engine with Pt catalyst at maximum loading condition. In the case of Pt-V catalyst, there was no big difference in conversion with the base engine even at maximum loading condition. The reason of SOF increase according to the increase of suflate emission was identified as the washing off effect of bound water in sulfate.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.131-137
• /
• 1996

The objectives of this research were to determine the effect of sulfur dioxide on the growth and yield reduction of 8 Korean barley cultivars. To achieve these, barley seeds were planted in pots, then those were exposed to 1.0 ppm $SO_2$ for 6 h in a closed-top field chamber at tillering and heading stage. Foliar injury and reduction of culm and awn length were more severe when barley cultivars were exposed to $SO_2$ at tillering stage than those at heading stage. Durubori was most susceptible to $SO_2$ among cultivars tested. However, number of node and length of spike were not affeced by $SO_2$ exposure in ail cultivars. Number of spike, and grains, and weights of 1,000 grains were significantly reduced by $SO_2$ exposure at tillering stage. The reduction rates of yield at tillering stage exposure were 22% and 47% in Dongbori and Durubori, respectively. Dongbori #2 showed the most tolerant to sulfur dioxide among 8 cultivars.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.387-394
• /
• 2011

A study on the removal of sulfur dioxide and nitrogen oxide was carried out using a non-thermal nano-pulse corona discharger at different gas temperatures. Pulse voltage with a high voltage of 50 kV, a pulse rising time of about 100 ns, a full width at half maximum of about 500 ns and a frequency of 1 kHz was applied to a wire-cylinder corona reactor. Ammonia and propylene gases were added into the corona reactor as additives with a static mixer. Ammonia addition had less effect on $SO_2$ reduction at the higher temperature because of the retardation of ammonium sulfate formation. However, propylene addition enhanced NO reduction at higher temperature due to increased gas mixture. $SO_2$ was further removed at the mixed $SO_2$ and NO gas due to increased $NO_2$ by the conversion of NO. The addition of ammonia and propylene gases was more highly dominant for the removal of sulfur dioxide compared to the sole pulse corona without the additives. However, the specific energy density per unit concentration of pulse corona as well as propylene additive was an important factor to remove NO gas. Therefore, the specific energy density per unit concentration of 0.04 Wh/($m^3{\cdot}ppm$) was necessary for the NO removal of more than 80% with the concentration ratio of 2.0 for propylene and NO. Hydrogen peroxide was another alternative additive to remove both $SO_2$ and NO in the nano-pulse corona discharger.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.105-112
• /
• 1979

A study was carried out to examine the effects of sulfur dioxide gas on soybean plants; at two concentrations(0.2mg/l and 0.5mg/l) and in different fumigation periods, The grain yield of soybeans, sulfur and chlorophyll contents in leaves, and ratios of destroyed leaf were investigated, 1) At the concentration of $SO_2$ 0.5mg/l, a) The yield decrease were 52% and 76.4% at 5 minutes and one houre fumigation period respectively, b) The sulfur contents in leaves were positively correlated with fumigation period and yield decrease, however the water soluble sulfur was superior than the total sulfur in correlation coefficient. 2) At the concentration of $SO_2$ 0.2mg/l; a) The most severe destruction of leaves were observed at noon exposure (10:00-11:00 O'clock) and no visible damage was observed at night exposure (22:00-23:00) b) The sulfur contents in leaves and stems were the highest at noon exposure and the lowest at evening exposure (18:00-19:00 O'clock) chlorophyll contents were the highest at night exposure but, the lowest at noon exposure, c) The ratio of destroyed leaf was positively correlated with the sulfur content of leaves, but negatively correlated with chlorophyll contents. d) Absorbance spectra of chlorophyll in the chlorolast were greatly decreased at noon exposure but slightly decreased at night exposure. The decrease of absorbance spectra was mainly at $456m{\mu}$ and $663m{\mu}$.

• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.99-106
• /
• 2009

The high temperature corrosion properties of heat resistant steels were investigated in oxidation atmosphere including sulfur dioxide. The heat resistant steels of T22, T92, T122, T347HFG and T304H were evaluated at 620, $670^{\circ}C$ for 400 hours. The corrosion rates showed a decreasing tendency while chrome contents of those steels increased from 2 mass.% to 19 mass.%. The in crease in temperature increasement has an more effect on the corrosion rates of low chrome steels than high chrome steels. The weight gains of T22, T92, T304H at $670^{\circ}C$ were 3.7, 1.65, 1.23 times compared with those at $620^{\circ}C$. The external scale formed on T22 was composed of hematite, magnetite and Fe-Cr spinel and internal layer including iron oxide mixed with sulfide. The scales formed on T92, T122, T304H consisted of an outer layer of hematite and inner layer of chrome oxide and hematite. The proportion of chrome oxide at inner layer was increased when the chrome contents in heat resistant steels were increased.