• Title/Summary/Keyword: Sulfur Dioxide

Search Result 417, Processing Time 0.029 seconds

NOx Removal of Mn Based Catalyst for the Pretreatment Condition and Sulfur Dioxide (전처리 조건 및 황산화물에 대한 Mn-Cu계 촉매의 탈질특성)

  • Park, Kwang-Hee;You, Seung-Han;Park, Young-Ok;Kim, Sang-Wung;Cha, Wang-Seog
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.4
    • /
    • pp.1923-1930
    • /
    • 2012
  • Mn-Cu catalysts were tested for selective catalytic reduction of NOx with NH3. Influence of initial reaction temperature was studied for NOx conversion in which reaction temperature was changed three patterns. NOx conversion of catalysts calcined at 200, 300 and $340^{\circ}C$ was measured during the changing temperature. Hydrogen conversion efficiency of calcined catalysts was also measured in the $H_2$-TPR system. The deactivation effect of $SO_2$ on catalyst was investigated with the on-off control of $SO_2$ supply. The catalyst which calcined above $340^{\circ}C$ was somewhat deactivated with thermal shock. The reason of deactivation was draw from the results of surface area and hydrogen conversion.

A study on the characteristics of limestone calcination and sulfation in a fluidized bed (유동층반응기를 이용한 석회석소성 및 황화반응 특성 연구)

  • Cho, Sang-Won;Oh, Kwang-Joong
    • Clean Technology
    • /
    • v.3 no.1
    • /
    • pp.106-113
    • /
    • 1997
  • The objectives of this study were to investigate the characteristics of limestone calcination and sulfation in a fluidized bed reactor with bed temperature and air velocity. The experimental results were presented as follows ; First, the bed temperature had a great influence on the calcination and the sulphur retention of limestone and paper sludge. In paper sludge, the optimum conditions in calcination and desulfurization temperature was at $800^{\circ}C$ and in natural limestone, that was at $850^{\circ}C$ or $900^{\circ}C$. Second, as air velocity increased, the specific surface area of particles decreased. But the difference of surface area according to air velocity was not too large. The specific surface area of paper sludge was larger than that of natural limestone. Third, as air velocity increased, the absorbed amount of sulfur dioxide decreased. And the absorbed amount of sulfur dioxide by paper sludge was larger than that of by natural limestone. Therefore, we knew that paper sludge was excellent absorbent and bed temperature had a great important variable on the calcination and sulphur retention in a fluidized bed.

  • PDF

The Kinetics Study of Ozone with Sulfur Dioxide in the Gas Phase (기체 상태에서의 오존과 아황산가스의 반응연구)

  • Young Sik Kwon
    • Journal of the Korean Chemical Society
    • /
    • v.35 no.2
    • /
    • pp.111-118
    • /
    • 1991
  • The kinetic of the gas phase reactions of ozone(0.5 torr) with sulfur dioxide was studied. The SO2 reaction was conducted in the 7∼22 torr range at 90∼155$^{\circ}$C. The reaction rate was faster than the reaction rate of O$_3$ in the presence of CO$_2$ alone. The reaction of O$_3$ with SO$_2$ follows the rate law: -d(O$_3)/dt=k_0(SO_2)(M)(O_3)+2k _1(SO_2)(O_3$). The first term of this rate law arises from a third order molecular reaction predominating in the lower temperature range and gave a rate constant k$_0$ = (9.35 $\pm$ 8.6) ${\times}$ 10$^9$e$^{-(11.05{\pm}2.04)kcal/RT}(M^{-2}s^{-1}$). The second term of the above rate law derived from a second order thermal decomposition reaction which was the major part of the reaction and gave a rate constant k$_0 =(9.35{\pm}8.6){\times}10^9e^{-(11.05{\pm}2.04)kcal/RT}(M^{-2}s^{-1}$). The overall reaction proceeds with kinetics of complex order composed mainly of second order and third order components.

  • PDF

Air Quality Prediction by CDMQC and Its Validation in the Ulsan Industrial Complex (CDMQC Model을 이용(利用)한 울산지역(蔚山地域)의 대기질(大氣質) 예측(豫測)과 실측치(實測値)와의 비교연구(比較研究))

  • Shin, Eung Bai;Lee, Kwang Ho
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.1 no.1
    • /
    • pp.77-90
    • /
    • 1981
  • This study involves 1) air quality disperson predictions and 2) a comparison of the predicted data with the actually measured ones in terms of annual sulfur dioxide concentration in the Ulsan Industial Complex. The prediction was made by utilizing the CDMQC air quality simulation computer model. The higher concentrations were observed at the Bugok Dong (Sampling Site) and the Yeochun Dong Sampling Site with the values of 44 and 46 ppb, respectively whereas the predicted values for both sites were 52 and 47 ppb, respectively. A statistical examination has revealed that the level of confidence was 90.02% from the Chi-squared test and the corelation coefficient was 0.827. It thus demonstrates that the model used for the study appears to be applicable to yield reliable predictions in terms of annual sulfur dioxide concentrations in the study area.

  • PDF

On the Hierarchical Modeling of Spatial Measurements from Different Station Networks (다양한 관측네트워크에서 얻은 공간자료들을 활용한 계층모형 구축)

  • Choi, Jieun;Park, Man Sik
    • The Korean Journal of Applied Statistics
    • /
    • v.26 no.1
    • /
    • pp.93-109
    • /
    • 2013
  • Geostatistical data or point-referenced data have the information on the monitoring stations of interest where the observations are measured. Practical geostatistical data are obtained from a wide variety of observational monitoring networks that are mainly operated by the Korean government. When we analyze geostatistical data and predict the expectations at unobservable locations, we can improve the reliability of the prediction by utilizing some relevant spatial data obtained from different observational monitoring networks and blend them with the measurements of our main interest. In this paper, we consider the hierarchical spatial linear model that enables us to link spatial variables from different resources but with similar patterns and guarantee the precision of the prediction. We compare the proposed model to a classical linear regression model and simple kriging in terms of some information criteria and one-leave-out cross-validation. Real application deals with Sulfur Dioxide($SO_2$) measurements from the urban air pollution monitoring network and wind speed data from the surface observation network.

Measurement of Atmospheric BTX in Seoul Using Differential Optical Absorption Spectroscopy (차등흡수 분광법을 이용한 서울 대기 중 BTX 측정)

  • Lee Chulkyu;Choi Yeo Jin;Lee Jeong Soon;Jung Jin Sang;Kim Young Joon;Kim Ki Hyun
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.21 no.1
    • /
    • pp.1-14
    • /
    • 2005
  • In this study, a Long Path Differential Optical Absorption Spectroscopy system (K-JIST LP-DOAS) has been used to simultaneously measure atmospheric monoaromatic hydrocarbons and other trace compounds. The validity of the K-JIST LP-DOAS for measuring atmospheric monoaromatic hydrocarbons was tested during a field campaign between 12 February and 14 March 2003 at an urban site in Seoul, Korea through inter-comparative measurements against a collocated on-line Gas Chromatography (GC) system. The concentrations of benzene, toluene, p-xylene, and m-xylene were measured with the K-JIST LP-DOAS system in the UV region (239~302 nm) over a 740 m beam path. For the other trace compounds, a longer spectral range (299~362 nm) was used. In order to remove the interference of atmospheric abundant species (such as oxygen, sulfur dioxide and ozone), two oxygen optical density spectra obtained at two pathlengths, 697 and 1133m, and reference spectra of sulfur dioxide and ozone were incorporated in the fitting procedure. The mean concentrations measured by our LP-DOAS during the measurement period were 0.77 ($\pm$0.38) ppbv for benzene, 3.68 ($\pm$1.90) ppbv for toluene, 0.41 ($\pm$0.19) ppbv for p-xylene, 0.54 ($\pm$0.24) ppbv for m-xylene. The concentration data of benzene, toluene, p-xylene and m-xylene obtained by our LP-DOAS were found to be in relatively good correlations with those of the online GC system. Pearson's coefficients in the observed concentrations between LP-DOAS and on-line GC were 0.84 for benzene, 0.83 for toluene and 0.65 for m,p-xylene. This study suggests that the LP-DOAS system can be used to provide reliable information on both the mixing ratios and temporal distribution characteristics of monoaromatic hydrocarbons in the urban air.

2-dimensional Mapping of Sulfur Dioxide and Bromine Oxide at the Sakurajima Volcano with a Ground Based Scanning Imaging Spectrograph System

  • Lee, Han-Lim;Kim, J.-Hoon;Ryu, Jae-Yong;Kwon, Soon-Chul;Noh, Young-Min;Gu, Myo-Jeong
    • Journal of the Optical Society of Korea
    • /
    • v.14 no.3
    • /
    • pp.204-208
    • /
    • 2010
  • A scanning imaging spectrograph system was used in this study to retrieve readings of the 2-D distribution of $SO_2$ and BrO around the crater of the Sakurajima volcano in Japan. The measurement was carried out during the daytime on November 2, 2005. Measurements were made at the surface of the site, located 5 km from the Sakurajima crater. One hundred horizontal scans were performed. Each column scanned by the system consists of 64 vertical pixels in order to retrieve the spatial distributions of BrO and $SO_2$ in the plume in terms of slant column densities (SCDs). Measured spectra were analyzed to identify and quantify $SO_2$ and BrO in the volcanic plume utilizing the plume's specific absorption features in the ultra violet region. Two-dimensional BrO and $SO_2$ distributions in SCD were retrieved horizontally covering the upwind, crater and downwind areas, and vertically, including the plume in the center of the scanned image. Both horizontal and vertical dispersions of $SO_2$ SCD from the crater were successfully measured to be from $10^{17}$ to $4.5{\times}10^{18}$ molecules $cm^{-2}$. However, BrO was measured below $10^{15}$ molecules $cm^{-2}$, which is considered its background level.

Adsorption Properties of SO$_2$ Using Fibrous Strong-base Anionic ion Exchange Scrubber (강염기성 음이온교환 섬유 스크러버를 이용한 SO$_2$의 흡착특성)

  • 황택성;최재은;강경석
    • Polymer(Korea)
    • /
    • v.26 no.5
    • /
    • pp.661-669
    • /
    • 2002
  • The purpose of this research is to absorb and remove sulfur dioxide existing in the air by using ion exchange non-woven fabric. So we found out very appropriate condition of anionic exchange fabric scrubber by measuring amount of SO$_2$ adsorption under the atmosphere that concentration, velocity, and humidity was 100∼200 ppm, 0.6∼1.0 m/sec, and 30∼90 RH%, respectively. Ion exchange capacity of ion exchanger showed the maximum value, 3.75 meq/g at pH 4, and adsorption equilibrium time was the maximum value, 30 h when gas velocity was 0.6 m/sec, moreover, at 80$\^{C}$, adsorption equilibrium time tended to decrease more than 10 h. When concentration was 200 ppm, while reaction speed between SO$_2$ and ligand of fibrous ion exchanger was getting faster, adsorption break point had a tendency to get faster as well. In addition, when relative humidity in the scrubber was 90%, adsorption efficiency was 7.6%/h that seemed to be 30% higher than 4.6%/h coming from the condition that relative humidity had been 30%, and it was totally absorbed under 5 wt% NaOH solution in 5 minutes.

Quantifying the Burden of cardiovascular Disease Attributable to Total Suspended Particulate and Sulfur Dioxide Using Years Lived with Disability (장애에 따른 상실생존년수를 활용한 대기중 총먼지와 아황산가스가 심혈관계질환에 미치는 영향 측정)

  • Ha, Beom-Man;Kang, Jong-Won;Kwon, Ho-Jang;Yoon, Seok-Jun
    • Journal of Preventive Medicine and Public Health
    • /
    • v.35 no.2
    • /
    • pp.92-98
    • /
    • 2002
  • Objective : To estimate the burden of cardiovascular disease attributable to the total suspended particulates (TSP) and sulfur dioxide ($SO_2$) in Korea using the YLD (years lived with disability) measurement. Methods : Congestive heart failure(CHF) and myocardial infarction (MI) were chosen as the main cardiovascular diseases whose causes are attributable to the TSP and $SO_2$ levels. In order to calculate the YLD (years lived with a disability), the following parameters in the formula were estimated. : the incidence rate, the case fatality rate, The expected duration of a disability and the average age of onset were estimated. The expected duration of a disability and the average age of onset were calculated using the DISMOD method, as developed by the GBD researchers. The burden of cardiovascular disease due to TSP and $SO_2$ was estimated using the number of years that the patient lived with a disability. Results : The VLD of the CHF due to the TSP and $SO_2$ was attributed to the TSP (94.4 person-year) and $SO_2$ levels (35.0 person-year). The YLD of the ME due to the TSP and $SO_2$ was attributed to the TSP (148.4 person-year) and $SO_2$ levels(27.6 person-year). Conclusion : The YLD method employed in this study was appropriate for quantifying the burden of cardiovascular disease. Therefore, it would provide a rational basis for planning a national health policy regarding the disease burden of the risk factors in Korea.

Decomposition of Dibenzothiophene Sulfone over KF/MgO Catalysts (KF/MgO 촉매를 이용한 Dibenzothiophene Sulfone 분해반응)

  • Kim, Hyeon-Joo;Jeong, Kwang-Eun;Jeong, Soon-Yong;Park, Young-Kwon;Jeon, Jong-Ki
    • Clean Technology
    • /
    • v.16 no.1
    • /
    • pp.12-18
    • /
    • 2010
  • The object of the present study is to apply KF/MgO catalysts to remove sulfur dioxide from dibenzothiophene sulfone, a by-product of oxidative desulfurization. Potassium fluoride was deposited via an impregnation method on MgO. The effects KF loading and calcination on the characteristics of the KF/MgO catalysts were investigated through the BET surface area, XRF, XRD, and temperature-programmed desorption of $CO_2$. The catalytic performances of the samples were investigated during the decomposition of dibenzothiophene sulfone to biphenyl and sulfur dioxide gas. KF loaded on MgO prepared by the impregnation method showed high catalytic activities for the decomposition of dibenzothiophene sulfone. The higher activity of KF/MgO just dried at 373 K, avoiding the usual activation at high temperature, than that over the calcined catalyst is ascribed to increase of the amount of basic sites. The high basicity probably may be due to the coordinately unsaturated $F^-$. The simply dried 10 % KF/MgO catalyst, without the usual activation at high temperature, showed the optimal catalytic properties.