• Journal of Biosystems Engineering
• /
• v.15 no.1
• /
• pp.44-51
• /
• 1990

Four models in current use for cereal grain drying, equilibrium model, Morey model, partial differential equation model and simplified partial differential equation model, were modified to be suitable for natural air drying of barley. The predicted by the four models and experimental results were compared. Three models except equilibrium model predicted moisture comtent and grain temperature very well. But equilibrium model overpredicted moisture content and grain temperature of bottom layer. The degree of prediction of the four models for relative humidities of exhaust air didn't differ much from one another and equally the four models predicted relative humidity statisfatorily. Morey model took much shorter computing time than any other models. Therefore, considering the degree of prediction and computing time Morey model was the most suitable for natural air drying of barley.

• Coupled systems mechanics
• /
• v.12 no.6
• /
• pp.519-530
• /
• 2023

This paper presents a mathematical model suitable for the calculation of laminated glass, i.e. glass plates combined with an interlayer material. The model is based on a beam differential equation for each glass plate and a separate differential equation for the slip in the interlayer. In addition to slip, the model takes into account prestressing force in the interlayer. It is possible to combine the two contributions arbitrarily, which is important because the glass sheet fabrication process changes the stiffness of the interlayer in ways that are not easily predictable and could introduce prestressing of varying magnitude. The model is suitable for reformulation into an inverse procedure for calculation of the relevant parameters. Model consisting of a system of differential-algebraic equations, proved too stiff for cases with the thin interlayer. This novel approach covers the full range of possible stiffnesses of layered glass sheets, i.e., from zero to infinite stiffness of the interlayer. The comparison of numerical and experimental results contributes to the validation of the model.

• Journal of information and communication convergence engineering
• /
• v.15 no.3
• /
• pp.143-150
• /
• 2017

Absorption of microwave radio frequency signal by atmospheric rain is prevalent at frequencies above 10 GHz. This paper presents the studies on rain attenuation at 18 GHz for 3.2 km experimental link between Khumdang (Korea Telecom, KT station) and Icheon (National Radio Research Agency, RRA station). The received signal data for rain attenuation and rain rate were collected at 10 second intervals over a three year periods from 2013 to 2015. Out of several models, the paper present discussion and comparison of ITU-R P.530-16 model, Moupfouma model, Da Silva Mello model along with suitable rain attenuation prediction method. The limitation of research lies on the experimental system that is set up in only one location, however, the preliminary results indicate the application of suitable 1-minute rain attenuation model for specific site. The method provides useful information for microwave engineers and researchers in making decision over the choice of most suitable rain attenuation prediction in terrestrial links.

• Journal of Information Technology Applications and Management
• /
• v.27 no.6
• /
• pp.141-151
• /
• 2020

The job mismatch between job seekers and SMEs is becoming more and more intensifying with the serious difficulties in youth employment. In this study, a bi-directional content-based metric learning model is proposed to recommend suitable jobs for job seekers and suitable job seekers for SMEs, respectively. The proposed model not only enables bi-directional recommendation, but also enables HR matching without relearning for new job seekers and new job offers. As a result of the experiment, the proposed model showed superior performance in terms of precision, recall, and f1 than the existing collaborative filtering model named NCF+GMF. The proposed model is also confirmed that it is an evolutionary model that improves performance as training data increases.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.291-296
• /
• 2000

In this paper a relatively simple and reliable wall models are investigated, which are suitable to be efficiently incorporated in a practical nonlinear seismic analysis of reinforced concrete shear wall structural systems. Four types of analogous frames have been selected for the elastic stress analysis. Three types of macro-elements model which include wide-column model, truss model and Kabeyasawa model, are chosen for the use in nonlinear analysis. A numerical analysis is carried out for six stories plane coupled wall structure. Analysis results indicate that macro-elements wall model is effective and suitable for simulating stress in elastic analysis. In inelastic analysis, the yielding strength have little effect on different wall model, and the effect on post-yielding stiffness in story shear-drift relationship depend on force-deformation properties of macro-elements.

• Structural Engineering and Mechanics
• /
• v.75 no.3
• /
• pp.327-337
• /
• 2020

The stability and dynamic performance of a flapper-nozzle servo valve depend on several factors, such as the motion of the armature component and the deformation of the spring tube. As the only connection between the armature component and the fixed end, the spring tube plays a decisive role in the dynamic response of the entire system. Aiming at predicting the vibration characteristics of the servo valves to combine them with the control algorithm, an innovative dynamic stiffness based on a distributed parameter model (DPM) is proposed that can reflect the dynamic deformation of the spring tube and a suitable discrete method is applied according to the working condition of the spring tube. With the motion equation derived by DPM, which includes the impact of inertia, damping, and stiffness force, the mathematical model of the spring tube dynamic stiffness is established. Subsequently, a suitable program for this model is confirmed that guarantees the simulation accuracy while controlling the time consumption. Ultimately, the transient response of the spring tube is also evaluated by a finite element method (FEM). The agreement between the simulation results of the two methods shows that dynamic stiffness based on DPM is suitable for predicting the transient response of the spring tube.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.222-226
• /
• 2003

Information retrieval must be able to search the most suitable document that user need from document set. If foretell document adaptedness by similarity degree about QL(Query Language) of document, documents that search person does not require are searched. In this paper, showed that can search the most suitable document on user's request searching document of the whole space using genetic algorithm and used knowledge-base operator to solve various model's problem.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.565-583
• /
• 1993

In order to reduce the production cost and improve the quality of dairy feed, several dairy feed mill model suitable for Korean farm size are developed. Also, capital requirement and operating costs of the model mill are analyzed. And these analyzed data are compared with the commercial feed production cost, in order to test whether the model mills are suitable or not in Korean dairy farm. Also optimum model is recommended depending on size of dairy farm. As a result, developed model mill(TMR) is very useful in Korea dairy farm not only reduce production cost up to 78% but also improve the qualities.

• Computers and Concrete
• /
• v.3 no.6
• /
• pp.423-437
• /
• 2006

Stress wave propagation through concrete is simulated by finite element analysis. The concrete medium is modeled as a homogeneous material with smeared properties to investigate and establish the suitable finite element analysis method (explicit versus implicit) and analysis parameters (element size, and solution time increment) also suitable for rigorous investigation. In the next step, finite element analysis model of the medium is developed using a digital image processing technique, which distinguishes the mortar and aggregate phases of concrete. The mortar and aggregate phase topologies are, then, directly mapped to the finite element mesh to form a heterogeneous concrete model. The heterogeneous concrete model is then used to simulate wave propagation. The veracity of the model is demonstrated by evaluating the intrinsic parameters of nondestructive ultrasonic pulse velocity testing of concrete. Quantitative relationships between aggregate size and testing frequency for nondestructive testing are presented.

• Journal of Navigation and Port Research
• /
• v.28 no.4
• /
• pp.311-315
• /
• 2004

This paper is aimed to develop a mathematical model for making the forecast information of typhoon's movement such as the estimated movement direction and positions after 24 and 48 hours. The proposed model calculates such kind of information of a typhoon by similar past typhoon's track data which are selected with three similarity criteria among the database of typhoons' tracks for past fifty years. We carried out a simulation forecast with No.14 typhoon formed in 1997, and found that the results of the proposed model were reasonable and it would be suitable for a simulation system for training mariners so that they can take suitable actions to evade the typhoons.