• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.55-60
• /
• 2020

The injection molding technique is a processing method widely used for the production of plastic parts. In this study, the gate position, gate size, packing time, and melt temperature were optimized to minimize both the stress and deformation that occur during the injection molding process of medical suction device components. We used a central composite design and Latin hypercube sampling to acquire the data and adopted the response surface method as an approximation method. The efficiency of the optimization of the injection molding problem was determined by comparing the results of a genetic algorithm, sequential quadratic programming, and a non-dominant classification genetic algorithm.

• Journal of Chest Surgery
• /
• v.21 no.6
• /
• pp.1084-1094
• /
• 1988

Conservative management of 3 iatrogenic perforations of intrathoracic esophagus was reviewed. The primary disorders were achalasia in 2 patients and congenital tracheoesophageal fistula in 1 patient. Perforation occurred after treatment of the primary disorders in the distal esophagus in 2 patients and mid-thoracic esophagus in 1 patient. All the perforations appeared late after the previous treatments and the inflammation spread to mediastinum and pleural cavity in all the 3 patients. Conservative management of esophageal perforation was carried out with intraluminal drainage from the perforated site of esophagus[insertion of Levin`s tube and continuous suction], pleural drainage and feeding of liquid diet through gastrostomy tube with Fowler`s position. The patients revealed spontaneous closure of perforated sites about 3 to 4 weeks after this conservative management without open thoracotomy. This result suggests that this conservative management may be accepted as therapeutic method in the thoracic esophageal perforations regardless of cause and time of the perforation.

• Journal of Chest Surgery
• /
• v.26 no.8
• /
• pp.633-637
• /
• 1993

Twenty-five patients with perforation of esophagus were managed at Pusan National University Hospital, from 1981 to 1993. The hospital course of 14 of these patients was evaluated with a special emphasis on the cause and location of perforation, clinical presentation, time elapsed from perforation to treatment, method of treatment, and outcome. Patients with anastomotic leak and cancer were excluded.The perforation was iatrogenic in 7 patients, spontaneous in 5, ingestion of foreign body in 1, and traumatic in 1. There were 7 cervical perforations, 2 upper thoracic perforations, and 5 lower thoracic perforations. Chest pain, fever, and dyspnea were frequent symptoms. Esophagography was most diagnostic [11 patients] but thoracentesis was of little diagnostic aid.Antibiotics were administered intravenously to all patients:hyperalimentation was accomplished intravenously in 11, and nasogastric suction was used in all cases. No patient required any surgical procedure, minor or major.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2158-2161
• /
• 1971

Although underdrainage has been studied for a long time, it is the third attempt in korea to execute, using P. V. C.(plastic) suction pipes in the low and wet fields. First, three execution plots and three control plots were set, then the drainage method and volume, soil temperature, growth and yield of crops, and under ground water level in the execution plot have been examined. These experiments have conducted with No-ngnim No 6(rice), and Palgweng (rice) which are the recommended varieties. And the above experiments have been executed for seven months between January and July. 1970. The experimenntal method adopted and the results obtained through the exeperiments are as follows:

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.133-138
• /
• 2007

Influence of changing combustor pressure on flame stabilization and emission index in the swirl-stabilized flame was investigated The combustor pressure was controlled by suction fan at combustor exit. Pressure index ($P^{\ast}=P_{abs}/P_{atm}$), where $P_{abs}$ and $P_{atm}$ indicated the absolute pressure and atmosphere pressure, respectively, was controlled in the range of $0.7{\sim}1.3$ for each equivalence ratio conditions. The flammable limits of swirl flames were largely influenced by changing combustor pressure and they showed similar tendency with laminar flames. $NO_x$ emission index decreased with decreasing pressure index for overall equivalence ratio conditions. R.m.s. of pressure fluctuations is increased with decreasing combustor pressure. This flame fluctuation caused incomplete combustion , hence CO emission index increased. These oscillating flames were measured by simultaneous $CH{\ast}$ chemiluminescence time-series visualization and pressure fluctuation measurement.

• Journal of Power System Engineering
• /
• v.21 no.2
• /
• pp.57-63
• /
• 2017

The large-eddy simulation(LES) was carried out to evaluate the drag and static pressure acting on the blade surface of a small-size axial fan(SSAF) under the condition of unsteady-state, incompressible fluid and three-dimensional coordination. The axial component of drag coefficient increases with the increase of operating load, but the radial components have negligible sizes regardless of operating loads. Otherwise, the static pressures acting on the blade surfaces of SSAF show different distributions around the operating point of D equivalent to the stall. Also, with the increase of operating load, the static pressures acting on the pressure and suction surfaces of blade concentrate at the tips and leading-edges as a whole.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.356-359
• /
• 2005

하수를 처리하는 공정에서 해마다 슬러지의 발생량은 증가하고 있으며, 이를 효과적으로 처리하는 것이 매우 중요하다. 따라서, 본 연구는 경제적이면서도 측정이 간편한CST(Cap-illary Suction Time)을 통해 슬러지 의 탈수성 과 적 정 주입량을 산출하는 방법을 연구하였다. 이를 위하여 본 실험의 대상인 도시 하수슬러지에 대하여 함수율 및 pH변화, 무기 및 유기 응집제의 주입량 변화, 그리고 응집제 투입 후 침전된 응집제량을 조사하여 탈수성을 조사하였다. 슬러지의 함수율을 97%, 98%, 99%로 했을 때, CST는 99%일 때가 가장 적은 값으로 나타났다 응집제 주입 후 침전된 슬러지의 생성량은 응집제가 증가됨에 따라 증가하다가, 최적 주입량보다 더 많은 응집제를 주입할 경우에는 그 양이 감소했다. 이는 형성된 응집물의 구조적 특성의 변화를 나타내고 있음을 알 수 있다. 위와 같은 실험 결과를 통해 CST는 수분이내(< Smin)에 슬러지의 탈수성을 신속하게 측정할 수 있는 방법이며 비교적 정확하게 측정할 수 있음을 알 수 있다. 뿐만 아니라 응집제의 최적 주입량 및 응집물의 구조적 특성을 평가하는 데에도 유용하게 사용할 수 있다.

• KSBB Journal
• /
• v.22 no.3
• /
• pp.129-133
• /
• 2007

This study represents that a removal efficiency of organic matters in wastewater is activated by a sludge process using new mixed microbial population. In case of mixed microorganisms, removal rates of suspended solid (SS), biochemical oxygen demand (BOD) and chemical oxygen demand (COD) were over 90 percent under experimental condition, and removal efficiency of organic matters, sludge density index (SDI) and capillary suction time (CST) in mixed population were higher than that in not-mixed microorganism, while total kjeldahl nitrogen (TKN) and total phosphorus (T-P) which indicate a degree of eutrophication were removed easily in both case. From these results, we may propose that an application of the mixed microbial population is useful to treat domestic wastewater including a great deal of organic matters.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.183-188
• /
• 2000

In this paper, we present a development of automatic fog water collector that operates during fog events. This collector consists of fraction collectors, a wind hall and a fog sensor. When a fog event is begin, then the fog sensor would judge whether it is a fog or not. If a fog is detected, the fog would be gathered by air suction fans, At the same time, the wind direction, the wind velocity, the atmospheric temperature and pressure would be measured and record simultaneously. We are also developing a wireless communication system for the remote control and data analysis to collect, store and process data collected in the automatic fog water collector.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.1
• /
• pp.41-46
• /
• 2008

In this study, dewaterability, one of the important properties of wastewater sludge, was investigated using a simple capillary suction time (CST) measurement method. It turned out that one could use the results of CST to find optimum flocculants ratio to improve drainage in wastewater treatment for the printing paper, tissue paper, and newsprint paper mill. Since the optimum ratio of flocculants could be determined with the value of CST, COD removal efficiency could be improved and optimum floc strength could be achieved with precise ratio of flocculants. It was thus that using CST for determining the optimum ratio of flocculants could be economical by reducing the amount of flocculants. Dewaterability could be measured within several seconds using the values of CST in a precise way. The dewaterability could also be useful in investigating the optimum ratio of flocculants.