• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.599-606
• /
• 2000

본 연구는 피에조콘(Piezocone) 관입 시험에 의한 과잉간극수압의 소산(Dissipation)특성을 파악하기 위하여, 실측된 소산실험 결과치와 Gupta & Davidson에 의해 개발된 연속 공동확장이론(Successive Cavity Expansion Theory) 모델을 비교하였고, 그 경험적 이론의 적합성을 규명하였다. 연속 공동확장 이론이란, 콘 관입이 유발하는 관입 주변지반의 변환 메커니즘을 연속적인 공동확장의 전개과정로 파악할 때, 관입주변의 연속적 공동확장 영역에서 발생된 과잉간극수압들은 연속적으로 소산되어지고, 결국에는 관입멈춤직후 얻게 되는 소산시험의 결과도 이러한 과잉간극수압의 연속적 소산 메커니즘으로부터 그 영향을 받는다는 개념이다. 본 연구의 실험방법은 Piezocone 관입을 위한 연약모형지반 조성을 위하여 초대형 Slurry Consolidometer에 Slurry를 45일간 압밀시킨후 Calibration Chamber(Louisiana State University Calibration Chamber System)에 옮긴 후 2차 압밀시키는 Two-Stage Consolidation Method를 사용하였다. 또한 모형지반내에 8개의 Piezometers를 설치하여 Piezometers를 설치하여 Piezocone 관입시 유발되는 지반 내에서의 과잉간극수압의 변환을 측정하였다. 실험결과와 이론 예측치를 비교함으로써 연속 공동확장이론 모델은 u$_2$형식의 피에조콘 관입 소산시험 결과들과 잘 들어맞는 모습을 보여줬으나, 관입으로 인한 주변 지반의 과잉간극수압의 소산변화는 정성적으로만 모사 되는 모습을 보여줬다.

• Mycobiology
• /
• v.44 no.3
• /
• pp.171-179
• /
• 2016

In the screening of marine mangrove derived fungi for lovastatin productivity, endophytic Aspergillus luchuensis MERV10 exhibited the highest lovastatin productivity (9.5 mg/gds) in solid state fermentation (SSF) using rice bran. Aspergillus luchuensis MERV10 was used as the parental strain in which to induce genetic variabilities after application of different mixtures as well as doses of mutagens followed by three successive rounds of genome shuffling. Four potent mutants, UN6, UN28, NE11, and NE23, with lovastatin productivity equal to 2.0-, 2.11-, 1.95-, and 2.11-fold higher than the parental strain, respectively, were applied for three rounds of genome shuffling as the initial mutants. Four hereditarily stable recombinants (F3/3, F3/7, F3/9, and F3/13) were obtained with lovastatin productivity equal to 50.8, 57.0, 49.7, and 51.0 mg/gds, respectively. Recombinant strain F3/7 yielded 57.0 mg/gds of lovastatin, which is 6-fold and 2.85-fold higher, respectively, than the initial parental strain and the highest mutants UN28 and NE23. It was therefore selected for the optimization of lovastatin production through improvement of SSF parameters. Lovastatin productivity was increased 32-fold through strain improvement methods, including mutations and three successive rounds of genome shuffling followed by optimizing SSF factors.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.3-10
• /
• 2015

Application of polar codes to rate-adaptive asymmetric Slepian-Wolf coding is considered. We propose a method of constructing polar codes which supports rate adaptivity. The proposed polar distributed source coding with successive cancellation list decoding performs closer to the Slepian-Wolf bound than the low density parity check accumulate (LDPCA) codes in the same framework.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1765-1768
• /
• 2005

Binary-search 알고리즘을 이용한 새로운 6-bit 300MS/s ADC 를 제안 하였다. 본 연구에서 제안된 ADC 는 저전력, 고속동작, 저해상도의 응용분야에 적합하도록 설계 되었다. 11 개의 rail-to-rail 비교기와 기준전압 발생기, 그리고 기준전압 제어회로로 구성 되었으며, 이는 기존의 구조와는 다른 전혀 새로운 형태로 제안된 것이다. 전력소모를 줄이기 위해 비교기 공유기술을 사용하였다. 또한 ADC 의 sub-block 인 rail-to-rail 비교기는 인버터 logic threshold 전압 값을 이용한 새로운 형태의 비교기를 제안하였다. 비교기는 인버터와 n-type preamp, p-type preamp 그리고 각각에 연결되는 latch 로 구성되었다. 기존의 rail-to-rail comparator 에 비해 입력 범위 전체 영역에서 일정한 gm 값을 얻을 수 있다. 실험결과 2.5V 공급전압에서, 17mW 의 전력 소모를 보이며, 최대 304MS/s 의 데이터 변환율을 가진다. INL 과 DNL 은 입력신호가 2.38Mhz 의 주파수를 가지는 삼각파일 때, 각각 ${\pm}0.54LSB$, ${\pm}1LSB$ 보다 작다. TSMC 0.25u 공정을 이용하였다.

• Journal of Sensor Science and Technology
• /
• v.27 no.1
• /
• pp.31-35
• /
• 2018

This paper describes a low-power, SNDR (signal-to-noise and distortion ration) enhanced SAR (successive approximation register) type 12b ADC (analog-to-digital converter) with noise shaping technique. For low power consumption and small chip size of the DAC (digital-to-analog converter), the top plate sampling technique and the dummy capacitor switching technique are used to implement 12b operation with a 10b capacitor array in DAC. Noise shaping technique is applied to improve the SNDR by reducing the errors from the mismatching of DAC capacitor arrays, the errors caused by attenuation capacitor and the errors from the comparator noise. The proposed SAR ADC is designed with a $0.18{\mu}m$ CMOS process. The simulation results show that the SNDR of the SAR ADC without the noise shaping technique is 71 dB and that of the SAR ADC with the noise shaping technique is 84 dB. We can achieve the 13 dB improvement in SNDR with this noise shaping technique. The power consumption is $73.8{\mu}W$ and the FoM (figure-of-merit) is 5.2fJ/conversion-step.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1655-1662
• /
• 1993

In this paper we discuss three algorithms-Direct, Successive, and Recursive-on parallel CRC(Cyclic Redundancy Check) verification. The algorithms are derived by combining the byte-syndromes precomputed from the generator polynomial. These algorithms are compared in terms of the amount of hardware and the speed of operation. Since the algorithms can be generalized easily, we took the ATM cell delineation example for easier description. As an application of the algorithm Recursive, an ATM cell delineation module suitable for STM-1 transmission has been successfully realized through commercially available field programmable gate arrays.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.141-145
• /
• 2002

Successive ion Exchange Column model was developed with the combination of mass action law and mole balance equation. consuming that ions entering the ion exchange bed pass the resin layer via consecutive ion exchange equilibrium. The application of the model to condensate polishing demineralizer in nuclear power plants indicates that the leakage of $Na^+$ and $Cl^-$ depends upon the degree of resin regeneration and that the ratio of specific ion concentration in Influent to in effluent is subject to the characteristics of resin and solution. The model can account for the local in-equilibrium with the correction of resin concentration and also can be applicable to a competitive ion exchange.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.42-51
• /
• 2020

In this paper, the authors propose the pseudo complex correlation coefficient (PCCC) of the two complex random variables (RV), because the four real correlation coefficients (RCC) of the corresponding four real RVs cannot be obtained only from the complex correlation coefficient (CCC) of given two complex RV. Such observation is motivated by the general statement; "The complex jointly-Gaussian random M-vector cannot be completely described by the complex covariance matrix, even though the real Gaussian random 2M-vector can be completely descried by the real covariance matrix. Therefore, in order to describe completely the complex jointly-Gaussian random M-vector, we need an additional matrix, namely the complex pseudo-covariance matrix, along with the complex covariance matrix." Then, we apply PCCC to correlated information sources (CIS) for non-orthogonal multiple access (NOMA) in 5G system, and investigate impact of the proposed PCCC on the achievable data rate of the stronger channel user in the conventional successive interference cancellation (SIC) NOMA with CIS. It is shown that for the given same CCC, the achievable data rates with the different PCCC are different, because the corresponding RCC are different. We also show that as the absolute value of the same CCC increases, the impact of the different PCCC becomes more significant.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1199-1208
• /
• 2013

In recent years, the development of application programs for distribution system analysis and control has been essential part for distribution management system (DMS). In this paper, we propose the common database for application programs of distribution management system. The proposed database model has several characteristics as followings. First, the proposed database model is designed for the common use of almost the whole distribution application software. The static equipment model and dynamic type tables are mixed and the parallel table structure is applied. Second, the linked list structure of database are used for the fast processing of applications. The database model includes the hierarchy and non-hierarchy distribution system structure. Third, the reduction method of distribution database is applied. For this, we present the network reduction rules. The basic concept of reduction rules are the electrical unification of successive line section which has not lateral branches and the removal of simple lateral branches which has no devices and other laterals. Proposed database model is tested for the Jeju system of Korea Electric Power Corporation (KEPCO). Through the test, we verified that the proposed database structure can be effectively used to accomplish the distribution system operation.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.3
• /
• pp.61-73
• /
• 2003

A model describing the distribution of contaminants in soil/water systems for the application of soil-washing technology using surfactant was developed. The model simulation was conducted for screening the best surfactant, evaluating the effect of water dose, and optimizing soil-washing methodology. Naphthalene, phenanthrene, and pyrene as target compounds and Triton X-l00, Tergitol NP-10, Igepal CA-720, and Brij 30 as surfactants were used in the model simulations. The washing efficiency was not greatly enhanced by increasing water dose with the same total surfactant dose. The approach of successive washings was more efficient than a single washing with the same amount of water and surfactant. Equal allotment of the amount of water and surfactant was the best condition for the successive washings. The model can be applied for the optimal design of the soil washing process without extra experimental efforts.