• Journal of Oral Medicine and Pain
• /
• v.18 no.1
• /
• pp.73-82
• /
• 1993

To investigate the changes in aerobic and facultative anaerobic oral microflora during remission-induction chemotherapy in patients with acute myeloid leukemia, 10 consecutive patients were studied during a period of 28 days. One day before, during and after the induction therapy, patients were given 10% Betadine solution for mouthrinses after breakfast and kept from eating and drinking. After 3 hours, paraffin-stimulated whole saliva was obtained for 2 minutes and transported to the laboratory. The samples were dispersed and homogenized by use of vortex mixer for 20 seconds. From these samples 10-fold serial dilutions (from 10-1 through 10-3) were prepared. Each dilution of 0.1 ml was plated on duplicate set of one nonselective medium (Blood agar) and four selective media (Sabourauds dextrose agar, Mannitol salt agar, Mac-Conkey agar, SF medium ) using applicator woods. All agar plate were incubated at 37$^{\circ}C$ for 48 hours. The total number of microorganisms was calculated and the percentage distribution of the various microorganisms from each specimen was drawn. 1. The salivary flow rate decreased by 66%, going from 5.38 ml/2min to 1.81 ml/2min over two days during the chemotherapy. 2. The total number of microorganisms in saliva increased by 22%, going from 4.88$\times$105/ml to 6.00$\times$105/ml over two days during the chemotherapy. 3. The salivary flow rate and the total number of microorganisms in saliva were recovered within 28 days after the chemotherapy. 4. The quantitative alteration in oral Enterobacteria, Enterococci, Staphylococci, Cndida during the chemotherapy had no statistical significance. 5. In saliva of the patients with acute myeloid leukemia who ahd intraoral ulcer, Enterobacteria was quantitatively predominent. Our study suggests that chemotherapy-induced transient xerostomia may induce acute oral infection. Consequently, the use of saliva substitute, the removal of intraoral infection source and the consistent oral hygiene care seem to be required to avoid the transmission of potential pathogenes in this group of patients.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.236-242
• /
• 2010

The objective of this study was to investigate the potential of the application of kimchi LAB as starter culture in the production of fermented sausages. For this, the solid-state model media composed to simulate the substantial conditions of meat mixtures were fermented for 120 h after the treatment with different concentrations of kimchi (0.5, 1.0, 1.5, 3.0, and 5.0%) and lyophilized kimchi-powder (0.2 % and 0.5%). During the fermentation period, the growth of total viable cells and LAB, and the changes of pH and titratable acidity were investigated. The initial LAB counts ranged from 7.18 to 8.34 Log CFU/ mL for kimchi media and from 6.93 to 6.94 Log CFU/mL for kimchi-powder media depending on the added concentrations. The kimchi LAB in this study were not influenced by the immobilized condition for their adaptation and growth by showing no lag phase and thus acted similar as in the submerged medium. The initially increased counts reached around 9 Log CFU/ mL in 12 h independent of the concentrations of a ded kimchi. However, the growth and metabolic activity of kimchi-powder LAB were influenced by the immobilized condition. Supposedly, as the nutrient supply in solid-state depended solely on diffusion, these differences in the souring properties were caused by the LAB topography in the medium matrix. Nevertheless, the differences in the numbers of LAB between two media were less than 0.5 Log units and the pH drop in the solidstate batches was quite rapid and reached low values. Therefore, it can be assumed that kimchi and kimchi-powder LAB showed the utility as the substitute of commercial starter culture even without a rehydrating pretreatment.

• Journal of Radiation Industry
• /
• v.4 no.4
• /
• pp.297-306
• /
• 2010

Due to the increasing incidence of diabetes, obesity and hypertensive, stevia has been placed great attentions as the sweetener to substitute sucrose in the world. Stevia was introduced to Korea in 1970's, but it has not been an attractive crop in that time. However, recently it has more attention for the natural food sweet additives. Because stevia have many problems for cultivation especially cultivar, seed germination, fertility, uniformity and glycoside quality, the sport mutation was attempted to in vitro plants for the improvement of some characteristics. The young in vitro plants was nursed on MS medium supplemented with $1mg\;l^{-1}\;GA_3$. Shoots of 10 cm height were irradiated with 0~200 Gy of gamma ray and the every node was separated and inoculated on MS basic medium. The lethality, number and length of shoot, numbers of node and branch were investigated for the evaluation of radiosensitivity. The optimum dose of gamma ray seemed to be around 80 Gy for the sport mutation induction in stevia. The lower node was more sensitive than higher node to radiation.

• Clinical and Experimental Reproductive Medicine
• /
• v.32 no.2
• /
• pp.177-185
• /
• 2005

Objective: This study was conducted to find an optimal condition for the vitrification of mouse morulae and expanded blastocysts. Materials and Methods: Mouse embryos were obtained at 2-cell stage and cultured to morula and expanded blastocyst stage in Human Tubal Fluid (HTF) medium supplemented with 10% Serum Substitute Supplement (SSS). The vitrification solutions used were EFS30, EFS35 and EFS40 that contains 30%, 35% and 40% ethylene glycol, respectively, with 18% ficoll and 0.5 M sucrose diluted in Dulbecco's phosphate-buffered saline (DPBS) medium supplemented with 10% SSS. The vitrification procedure was performed in EFS solution with three steps, followed by thawing in 6 steps with 0.5 M sucrose, and then survival and hatching-hatched rate per embryos recovered were compared among six groups. Results: After 24 h culture in different vitrification and thawing solution, the survival rate of morula embryos was 94.1%, 85.4% and 59.7% for EFS30, EFS35 and EFS40 group, respectively. Hatching rate of morula embryos after 72 h culture was 30.6%, 25% and 11.3% for EFS30, EFS35 and EFS40 group, respectively. The survival rate of expanded blastocyst embryos after 24 h culture was 90.4%, 98.5% and 100% for EFS30, EFS35 and EFS40 group, respectively. Hatching rate of expanded blastocyst embryos after 48 h culture was 46.2%, 57.6% and 64.3% for EFS30, EFS35 and EFS40 group, respectively. Conclusion: The EFS30 solution was the best for vitrification of mouse morulae. The EFS40 solution was the best for vitrification of mouse expanded blastocysts. The mouse expanded blastocyst was better than mouse morula for vitrification of mouse embryos.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.111-118
• /
• 2009

Against Anomaly of GPS, there are several projects of independent satellite navigation systems like Galileo of Europe and QZSS of Japan and modernization of terrestrial navigation system like Loran. In domestic, the need of independent navigation system was proposed and DGPS signal was nominated as the possible substitute. The DGPS signal uses medium frequency, which travels through the surface and cause the additional delay rather than the speed of light according to Conductivities and elevations of the irregular terrain. The similar approach is Locan-C. Loran-C has been widely used as the maritime location system. Loran-C uses the ASF estimation method and provides more precise positioning. However there was rarely research on this area in Korea Therefore, we introduce the legacy guaranteed model of additional delay(ASF) and present the results of implementation. With the comparison of the original Monteath results and BALOR results respectively, we guarantee that the implementation is absolutely perfect. For further works, we're going to apply the ASF estimation model to Korean DGPS system with the Korean terrain data.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.58-63
• /
• 1999

Biodegradable films were prepared by solution blend method in the weight ratio of chitosan for the purpose of useful biomaterials. The possibility of biomaterials prepared from natural polymer as a skin substitute was evaluated by measuring biocompatibility. These films were inserts in the back of rat and their biodegradability was investigated by the film weight and hematology as a function of time for the biotransformation. The result of rat test showed that medium, high viscosity chitosan induced some suspects of inbiocompatibility in the tissue by goreign body reaction 48 and 72 hours after implantation. Also, we prepared the official burn ointment which is made by low viscosity chitosan. This burn ointment was covered on the skin wound of artificial burn and their effect of healing was investigated by the evaluation of the naked eye and hematological change as a function of time. The result of rats test showed that burn ointments made from chitosan was effective reductio of inflammation than negative group.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.423-429
• /
• 2009

The objective of this study was to investigate the potential of the application of lactic acid bacteria (LAB) from kimchi as a starter culture in the production of fermented sausages. To achieve this, a submerged model medium that contained LAB as part of a complex system of kimchi (0.5, 1.0, 1.0, 3.0, and 5.0%) and lyophilized kimchi powder (0.2 and 0.5%) was fermented for 120 h. During the fermentation period, the growth of total viable organisms and LAB, and the changes in the pH and the titratable acidity, were investigated. The initial LAB counts ranged from 6.4 to 7.7 Log CFU/mL for the kimchi media, and from 6.9 to 6.9 Log CFU/mL for the kimchi powder media. In all the kimchi batches, the LAB increased logarithmically, and the highest LAB counts (around 9 Log CFU/mL) were reached in 24 h. An evident lag phase of the LAB was observed in the kimchi powder samples and reached 8.8 Log CFU/mL in 8 h. The decrease in the pH and the formation of lactic acid were rapid in the kimchi batches, and reached pH values of 3.4-3.5 in 12 h. With these results, the LAB that was integrated with the addition of kimchi or kimchi powder demonstrated its potential utility as a substitute for starter culture.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.3
• /
• pp.351-359
• /
• 2010

Bi-fuel system in a spark ignition engine (SIE) is a rising phenomena in today's automobile technology. In a gasoline driven vehicle, alternatively adoption of compressed natural gas (CNG) could be used as a potential substitute to meet the energy requirement and this is possible by some minor changes in the hardware of the existing engine. Gasoline engine is widely used in the passenger cars, light, medium and heavy duty vehicles but the consumption status of the petroleum is decreasing worldwide and at the same time environmental pollution from automobiles is seriously establishes as a threat for every nation in respect to global warming and climate changes. Now-a-days most vehicles operate using CNG for its popularity stems, clean burning properties and cost effective solution compared to other alternative fuels. It refers as a good gaseous fuel because of its high octane number and self ignition temperature. Though the power output is slightly lesser than the gasoline fuel; its thermal efficiency is better than the gasoline for the same SIE. The research paper highlights the reduction of CO, reasonable outcomes of HC emissions with minor increase in $NO_x$ emissions compared with the gasoline fuel to bi-fuel mode in the SIE that meets the emission challenges.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.126-132
• /
• 1993

The objective of this study was to develop an artificial dentin for easy handle and accurate observation of the mechanism on dental caries and to screen biologically active materials from the extracts of traditional plants and fruits for prevention of early dental cares. In order to produce disc PAHA (artificial dentin), the powdered hydroxylapatite was immobilized in a 20% polyacrylamide gel. The characteristics of disc PAHA was very similar to the surface, figure and lattice of human enamel. After decalcification in 0.1M citric acid based on observation with SEM. The critical point of decalcification of disc PAHA by acids was found to be pH 5.0-5.5, which was hi agreement with human enamel. The degree of decalcification from disc PAHA in 0.1M citric acid solution was sixfold higher than that of human enamel. This result suggested that disc PAHA would be useful as a substitute of human enamel for in vitro experiment. The extracts of garlic and Flower Apple A, B seemed to inhibit growth of S. mutans. Especially, when the 300$\mu\ell$ of its extracts added to the medium to incubate S. mutans, F. apple B showed strongly an inhibitory effect in both the growth of S. mutans and the synthesis of insoluble glucan.

• Structural Engineering and Mechanics
• /
• v.69 no.1
• /
• pp.95-104
• /
• 2019

The Standard ASCE 61-14 proposes the Substitute Structure Method (SSM) as a Nonlinear Static Procedure (NSP) to estimate nonlinear displacement demands at the center of mass of piers or wharves under seismic actions. To account for bidirectional earthquake excitation according to the Standard, results from independent pushover analyses in each orthogonal direction should be combined using either a 100/30 directional approach or a procedure referred to as the Dynamic Magnification Factor, DMF. The main purpose of this paper is to present an evaluation of these NSPs in relation to four wharf model structures on soil conditions ranging from soft to medium dense clay. Results from nonlinear static analyses were compared against benchmark values of relevant Engineering Design Parameters, EDPs. The latter are defined as the geometric mean demands that are obtained from nonlinear dynamic analyses using a set of 30 two-component ground motion records. It was found that SSM provides close estimates of the benchmark displacement demands at the center of mass of the wharf structures. Furthermore, for the most critical pile connection at a landside corner of the wharf the 100/30 and DMF approaches produced displacement, curvature, and force demands that were reasonably comparable to corresponding benchmark values.