• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.1004-1008
• /
• 2012

The effect of address discharge characteristics by selective reset method is investigated to prevent the weakness of address discharge in the middle of a TV-field without increase of the black luminance. To reduce black luminance in AC PDP usually, the first subfield during one TV frame adopted the conventional rising ramp-reset waveform, whereas the other subfields adopted the subsidiary reset waveform without rising ramp type. As the wall charge for the address discharge was accumulated by only the rising ramp waveform during the first reset period, the wall charge on three electrodes was disappeared as time passed and the address discharge would be weakened in the rear subfields. To prevent a reduction of the address discharge characteristics without decrease the black luminance, the modified rising ramp reset waveform was adopted only in the sixth subfield. As a result, a modified driving method could improve the address discharge characteristics compared with selective reset driving scheme with almost the same black luminance.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1054-1061
• /
• 2011

GMA welding process is a production process to improve productivity for the provision of higher quality of material, These includs numerous process variables that could affect welding quality, productivity and cost savings. Recently, the welding part of construction equipment had frequent failure of major components in the welding part of each subsidiary material due to shock which is very poor according to the welding part. Therefore, the implementation of sound welding procedure is the most decisive factor for the reliability of construction machinery. The data generated through experimens conducted in this study has validated its effectiveness for the optimization of bead geometry and process variables is presented. The criteria to control the process parameters, to achieve a healthy bead geometry. This study has developed mathematical models and algorithms to predict or control the bead geometry in GMA fillet welding process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.82-85
• /
• 2003

This dissertation describes an optimization method for fabricating thick films with superconducting YBCO powders by electrophoresis technique. The lateral alternating applied voltage caused to shake the superconducting powder vertically to the deposition field during the process of the oriented deposition so that it was deposited along the c-axis on the silver tape with shaky-aligned EPD. As the result, the optimized thin film fabrication method was obtained to get more dense and uniform surface morphology as well as the improved critical current density. For commercial utilization and efficiency, in this dissertation, alternating voltage of 25-120 V/cm in frequency of 60Hz was proposed to apply it as a subsidiary source for shaky-flow deposition so that the fabricated thin film showed uniform surface morphology with less voids and cracks and $T_{c.zero}$ of 90 K and the critical current density of $3419A/cm^2$.

• Journal of Welding and Joining
• /
• v.29 no.4
• /
• pp.41-47
• /
• 2011

GMA welding process is a production process to improve productivity for the provision of higher welding quality of material. These includes numerous process variables that could affect welding quality, productivity and cost savings. Recently, the welding part of construction equipment had frequent failure of major components in the welding part of each subsidiary material due to shock which is very poor according to the welding part. Therefore, the implementation of sound welding procedure is the most decisive factor for the reliability of construction machinery. The data generated through experiments conducted in this study has validated its effectiveness for the optimization of bead geometry and process variables is presented. The criteria to control the process parameters, to achieve a good bead geometry. This study has developed mathematical models and algorithms to predict or control the bead geometry in GMA fillet welding process.

• Journal of the Korean housing association
• /
• v.23 no.3
• /
• pp.71-78
• /
• 2012

This study analyzed metaphorical characteristics of composite materials in terms of a visual aspect on a new material that is applicable for housing space. The results are as follows. First, the recent trend of housing space tends to stimulate emotions of residents through visual finishing materials, and for this reason, visual expression of a new material that is applicable to finishing materials plays an important role. Second, convertibleness, association and duplicity were selected as items of metaphorical expressions through the precedent studies. Third, most of combinations of materials were shown different from the existing materials in an expressive characteristic of composite materials through analysis, and application of a technology showed a different visual effect of patterns and textures from the existing materials. This implies that visual expression and directing are being attempted using such technology on finishing materials of housing space with development of digital technologies. Fourth, for metaphorical characteristics of composite material for housing space, combination of various materials and a digital technology were applied on convertibleness. For association, a combination of materials that have each different characteristic associated with the third material, and combination with subsidiary material of optical fiber and a digital technology were appled for duplicity. Data obtained from the results of this study has high efficiency in planning finishing materials for emotional housing space in future, and it will be basic data for a study on development of new finishing materials.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.115-121
• /
• 2010

Lime was the solidifier mostly used at the fields of construction and civil works in the past. however, the development of Portland cement remarkably reduced the use of it. Recently as the concernment on circumstances gets higher, lime wined attention again as an eco-friendly material and was used at earth-using construction. This study examined the physical and chemical capacity of lime complexes with lime capacity improved, and performed fundamental study on the way to concretize by mixing it with earth. As a result, lime complex pressure strength was lower than cement pressure strength but it showed the possibility that its strength was improved by W/B control. The measurement of XRD after paste formation confirmed a compound generated by the reaction of Ca2+ion and Si, Al, and Fe from pozzolan reaction. A earth wall experiment by using lime complexes and earth showed that the higher, WB or the lower the quantity of unit combined materials, the lower the pressure strength was. The maximum pressure strength was maximum 11MPa when the quantity of unit combined materials was 450. It is because the composed earth particles had a high content of micro powder less than silt, so a lot of combination are demanded to secure fluidity. As a result of peptization experiment, after hardening, the material was not dissolved, which informed of the possibility of use as an outer subsidiary material. If the material is hardened by mold formation method, natural hardening crack appears. Cast expresses smart surface quality and enables to design for multiple purpose. The result shows the possibility of construction of low-story structures by using earth wall made of lime complexes and earth.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.475-490
• /
• 2012

Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic, fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.04968kg-$CO_2$ for oystershells, 0.004692kg-$CO_2$ for expanded rice hull, and 1.029kg-$CO_2$ for bordeaux mixture liquid.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.93-104
• /
• 2012

In this research LCA methodology was adapted and analyzed in quantifying estimation of estuarine environment. The analysed objects of estuarine environment were construction methods, facility, and input material into water, and estuarine ecosystem. In this research the function of LCA of estuarine environment was river with the view of controling water, utilizing water, and hydrophilic function. According to the result of research, environmental damage indicator of facility was decreased 346 Pt from 453 Pt at pre-maintenance to 107 pt at post-maintenance. Among raw and subsidiary materials, remicon, stone-netting bag, and pebbles were showing heavy environmental load in the order. Evironmental impact of input material into water system was analyzed from 1,827 Pt environmental load before construction to 1,080 Pt of post-maintenance, and damage indicator was improved at 747 Pt. Water quality was improved from 1,827 Pt (before construction) to 1,080 Pt(after construction), and ecosystem was improved after maintenance. Environmental indicator in ecosystem was analyzed 427 Pt(before construction) to 348 Pt(after construction), and damage indicator of Sumnjingang riverine system was improved as much as 79 Pt. In the conclusion, estuarine environmental monitoring through LCA in the area of facility, input material into water and ecosystem showed that close-to-nature stream was 1,172 Pt better than artificial stream in environmental aspects.

• Journal of the Korean Home Economics Association
• /
• v.44 no.11
• /
• pp.171-178
• /
• 2006

Recently more than ever, interest in Korean tradition has been on the increase, with an active movement to follow tradition. There are various merits for expression with the use of Korean paper as a clothing material. The purpose of this study was to assess the aesthetic characteristics of men's shirts fashioned using Korean paper (Hanji). The following conclusions were obtained from an analysis of the aesthetic characteristics of Hanji shirts. First, Hanji has a peculiar texture, with natural characteristics due to the direct use of naturally handcrafted materials. Hanji shirts have the natural beauty of pure Hanji, without artificial treatment or other subsidiary materials, with the exception of thread. Secondly, Hanji shirts with decorative details and trimmings, such as frills, pin tuck, embroidery and spangles, express an ornamental beauty. Thirdly, Hanji shirts with frills or a fringe have real movement when worn and spangles give the illusion of movement due to changes in color or twinkling caused by light giving the beauty of rhythmical motion. Fourthly, Hanji shirts produced using the application of various techniques, such as crumple, painting and dying, express artistic beauty. Fifthly, Hanji shirts can express traditional beauty, even if created whit modem designs, but using traditional materials.

• The Korea Journal of Herbology
• /
• v.22 no.2
• /
• pp.121-126
• /
• 2007

Objectives : A morphological classification among Adenophora triphylla var. japonica, Codonopsis lanceolata, Adenophora remotiflora and Codonopsis pilosula was made through microscopic observation. Method : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by olymphus-BHT. Result : 1. Codonopsis pilosula is like a long cone, with amole-like projected parts at the beginning of the roots. 2. Adenophora triphylla var. japonica, Codonopsis lanceolata, Adenophora remotiflora, and Codonopsis pilosula are all similar as following: 1) Cork layers are composed of a few to over 10 subsidiary cells, with individual or a group of stone cells among them. 2) Phloem is wide and has a milk tube. Conclusion : Adenophora triphylla var. japonica, Codonopsis lanceolata, Adenophora remotiflora, and Codonopsis pilosula are all similar and difficult to be distinguished through microscopic observation, so that chemical experiments should be conducted for their identification.