• Child Health Nursing Research
• /
• v.9 no.1
• /
• pp.9-17
• /
• 2003

Families of children with cancer face many illness-related demands. The perceived social support is a critical resource for the family adaptation process. And the patterns of family adaptation to childhood cancer varies as characteristics of disease, which is prognosis, the influence of cognition function, and treatment process. The conceptual definition of social support is not unidimensional. However, most studies focus on general aspect of mediating effects on adaptation. Diverse dimensions of perceived social support should be considered in its effectiveness for intervention. Therefore, this study was undertaken to determine whether family's perceived social support influences the family adaptation of family with pediatric cancer and what dimension influences mostly in family adaptation as the characteristics of disease in the family of children with cancer. The subject was consisted of 102 families with pediatric cancer who had been diagnosed as leukemia or brain tumor last 2 years. Those families had participated in the education program or meetings for family who have with pediatric cancer children. The measurement for this study were Personal Resource Questionnaire (PRQ) Part-Ⅱ developed by Brandt and Weinert to measure parents' perceived social support, and the McCubbin's Coping Health Inventory for Parents (CHIP) to measure family coping. The results of this study can be summarized as follows; Regression analysis showed that perceived social support has effect on family adaptation with β=.43, p<.01. In the group of family of child with leukemia, social support as general has effect on adaptation (β=.40, p<.01) and specially, social support perceived as intimacy was strongly effect on family adaptation. And In the group of brain tumor, Social support has effect on adaptation(β=.46, p<.01) and among the social support domains, the self esteem dimension was most predictable to family adaptation. In conclusion, the perceived social support is a predictor on family adaptation and useful vehicle to help family who has child with pediatric cancer. An important clinical implication is that specified support program for intervention may be useful and critical for the family who has diverse pediatric conditions of childhood cancer. Further studies should stress the effects of family support for clinical intervention and is needed with diverse stage of development and pediatric conditions.

• (The) Research of the performance art and culture
• /
• no.37
• /
• pp.95-125
• /
• 2018

While myriads of small and large festivals are being organized in many regions across the country after the successful establishment of local governments around 2000, the undeniable fact is that the identity and purpose of such events are not properly reflected in their programs. This paper carefully examines the 2017 Jeonju International Sori Festival as an exemplary case of a local performing art festival to contribute to the improvement of performing art festivals in the future. In particular, it focuses on a musical program with respect to the composition, content, meaning, and direction that can effectively reveal the identity and intention of a festival. The most significant accomplishment of the 2017 Jeonju International Sori Festival is that it presented a local cultural resource, Pansori, in various ways not only to manifest its identity but also to satisfy both the enthusiasts of such musical genre and the general audience. The achievements of the 2017 Jeonju International Sori Festival through the performing art program can be summarized as follows: first, it created a new image of traditional music; second, it realized the desire to rise above regional and generational demarcations through cultural communication; third, it provided a stage for budding and local artists; fourth, it served as a vehicle for summoning the public; and last, it was conducive to expanding the spectrum of potential audience. This paper has limitation in covering the subject of the improvement of performing art festivals because it analyzed only one event. In follow-up studies, a more objective discussion should be performed by further analyzing the 2017 Jeonju International Sori Festival in comparison with various other performing art festivals.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1073-1080
• /
• 2018

There are several types of petroleum products used for the fuel oil, according to their respective quality standards, grades and usage. Depending on the degree of oil tax rate by country, even the same petroleum products will have price gap. The illegal mixing of cheap petroleum products, which are subject to the lower tax rate, with relatively expensive transportation fuel causes problems such as tax evasion, environmental pollution and vehicle breakdown. In order to prevent illicit production and mixing of these different petroleum products, a small amount of markers are legally added to specific petroleum products. In Korea, markers are introduced and used to prevent illegal activity that kerosene used as fuel for house and commercial boiler are mixed with automotive diesel fuels, and marker contents are analyzed to use UV-Vis spectrophotometer and high performance liquid chromatography (HPLC). In this study, we have developed a method to qualitatively and quantitatively determine the marker added to petroleum products by gas chromatography-mass spectrometry (GC-MS) without adding developing reagent or sample pre-treatments.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.251-265
• /
• 2020

The Drone shot is moving images captured by a remotely controlled unmanned aerial vehicle, takes usually bird's eye view. The hand-held shot is moving images recorded by literal handheld shooting which is specialized to on-the-spot filming. It takes a walker's viewpoint through vivid realism of its self-reflexive camera movements. The purpose of this study is to analyze comparatively aesthetic functions of the drone shot and the hand-held shot. For this, the study understood Certeau's concepts of 'place' and 'space,' chose World Travel 'Peninsula de Yucatan' episode as a research object, and analytically applied two concepts to the scenes clearly presenting two shots' aesthetic characteristics. As a result, the drone shot took the authoritative viewpoint providing the general information and atmosphere as it overlooked the city with silent movements removing the self-reflexivity. This aesthetic function was reinforced the narration and subtitles mediating prior-knowledge about proper rules and orders of the place. The drone shot tended to project the location as a place. Conversely, the hand-held shot practically experienced the space with free walking which is free from rules and orders inherent in the city. The aesthetics of hand-held images represented the tactic resisting against the strategy of a subject of will and power in that the hand-held shot practiced anthropological walking by means of noticing everyday lives of the small town and countryside than main tourist attraction. In opposition to the drone shot, the hand-held shot tended to reflect the location as a space.

• Journal of Korean Medicine for Obesity Research
• /
• v.24 no.1
• /
• pp.87-93
• /
• 2024

Objectives: Obesity is a globally prevalent public health issue. Hence, there is a need for the development of safer and more effective anti-obesity drugs. Lythrum salicaria, a traditional medicinal herb used for centuries, has been reported to improve lipid metabolism and fat accumulation. It also has a low toxicity profile. Therefore, its potential as a functional ingredient in health functional foods needs to be evaluated. Methods: In this randomized, double-blind, placebo-controlled clinical trial, 90 participants will be randomly assigned to either the experimental or control group. Each subject will orally receive L. salicaria extract (1,350 mg/day) (500 mg L. salicaria+850 mg lactose as vehicle) or lactose (1,350 mg/day) as a hard capsule formula for 84 days (12 weeks). The primary outcome will be body fat mass (kg), which will be assessed using dual-energy x-ray absorptiometry (DXA) (performed only at visits 2 and 4). Secondary outcomes include body mass index, body weight, waist-to-hip ratio, body fat percentage (%) measured using DXA, lean body mass (kg) measured using DXA (assessed only at visits 2 and 4), lipids (total cholesterol, triglyceride, high-density lipoprotein cholesterol, and calculated low-density lipoprotein cholesterol), free fatty acid, high sensitivity C-reactive protein, adiponectin, and leptin. Conclusions: This protocol will be implemented after approval of Institutional Review Board of Pusan National University Korean Medicine Hospital (approval number: PNUKHIRB-2022-08-002) and registration with the Korean National Clinical Research Information Service (CRIS) (CRIS-KCT0008060). The results of this trial will provide potential of L. salicaria as a new anti-obesity functional food with fat-reducing effects and low toxicity.

• Journal of the Daesoon Academy of Sciences
• /
• v.49
• /
• pp.1-52
• /
• 2024

One notable characteristic of Daesoon Jinrihoe's view of time, is its perception of time as a passive entity. This signifies that, in the context of Daesoon Jinrihoe, time is subject to influence through experience, specifically undergoing re-calibration or governance. The summary of this perspective is as follows: Firstly, Daesoon Jinrihoe's understanding of time incorporates a historical viewpoint characterized by the law of entropy, which posits that disorder increases as time progresses. Secondly, within the world established by Daesoon Jinrihoe, time experiences transformation before and after the Great Opening. Prior to this event, time follows a helical model characterized by increasing chaotic disorder, whereas in the Later World, the helical model reflects only Mutual Beneficence, symbolizing progress and development in the era. Thirdly, the Great Opening re-calibrates time, serving as the criterion for determining human life. Prior to the Great Opening, time recorded human life in a manner marked by Mutual Contention, whereas afterward, it will record human life as being characterized by Mutual Beneficence. This re-calibration of time leads precisely to directional (spatial) re-calibration. Fourthly, the Great Opening re-calibrates the order of time and space. In the Former World, space held precedence over time. However, the Great Opening changes this dynamic, with time assuming precedence over space in the Later World. In this context, the integration of time and space establishes a worldview. Fifthly, in the worldview of Daesoon Jinrihoe, time serves as a vehicle for the governance of the Supreme God. The Supreme God governs all things by controlling time, orchestrating changes spanning birth (saeng, 生), growth (jang, 長), harvest (yeom, 斂), and storage (jang, 藏), much like how problems are resolved through natural progress without requiring deliberate action. Lastly, time functions as a medium through which entities that strive to achieve unification with the Dao come to govern all things. For this reason, achieving unification with the Dao in Daesoon Jinrihoe specifically refers to the governance of time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.245-253
• /
• 2021

RC slab bridges account for the largest portion of deteriorated bridges in Korea. However, most RC slabs are not included in the first and second classes of bridges, which are subject to bridge safety management and maintenance. The highest damaged components in highway bridges are the subsidiary facilities including expansion joints and bearings. In particular, leakage through expansion joints causes deterioration and cracks of concrete and exposure of reinforced bars. Therefore, this study analyzed the effect of adhesion damage at expansion joints on the response of the deck in RC slab bridges. When the spacing between the expansion joints at both ends was closely adhered, cracks occurred in the concrete at both ends of the deck due to the resistance rigidity at the expansion joints. Based on the response results, the correlation analysis between displacements in the longitudinal direction of the expansion joint and concrete stress at both ends of the deck for each damage scenario was performed to investigate the effect of the occurrence of damage on the bridge behavior. When expansion joint devices at both sides were damaged, the correlation between displacement and stress showed a low correlation of 0.18 when the vehicles proceeded along all the lanes. Compared with those in the intact state, the deflections of the deck in the damaged case at both sides showed a low correlation of 0.34 to 0.53 while the vehicle passed and 0.17 to 0.43 after the vehicle passed. This means that the occurrence of cracks in the ends of concrete changed the behavior of the deck. Therefore, data-deriven damage detection could be developed to manage the damage to expansion joints that cause damage and deterioration of the deck.

• KDI Journal of Economic Policy
• /
• v.13 no.1
• /
• pp.115-134
• /
• 1991

The role of pension plans in the macroeconomy has been a subject of much interest for some years. It has come to be recognized that pension plans may alter basic macroeconomic behavior patterns. The net effects on both savings and labor supply are thus matters for speculation. The aim of the present paper is to provide quantitative results which may be helpful in attaching orders of magnitude to some of the possible effects. We are not concerned with the providing empirical evidence relating to actual behavior, but rather with deriving the macroeconomic implications for a alternative possibilities. The pension plan interacts with the economy and the population in a number of ways. Demographic variables may thus affect both the economic burden of a national pension plan and the ability of the economy to sustain the burden. The tax transfer process associated with the pension plan may have implications for national patterns of saving and consumption. The existence of a pension plan may have implications also for the size of the labor force, inasmuch as labor force participation rates may be affected. Changes in technology and the associated changes in average productivity levels bear directly on the size of the national income, and hence on the pension contribution base. The vehicle for the analysis is a hypothetical but broadly realistic simulation model of an economic- demographic system into which is inserted a national pension plan. All income, expenditure, and related aggregates are in real terms. The economy is basically neoclassical; full employment is assumed, output is generated by a Cobb-Douglas production process, and factors receive their marginal products. The model was designed for use in computer simulation experiments. The simulation results suggest a number of general conclusions. These may be summarized as follows; - The introduction of a national pension plan (funded system) tends to increase the rate of economic growth until cost exceeds revenue. - A scheme with full wage indexing is more expensive than one in which pensions are merely price indexed. - The rate of technical progress is not a critical element in determining the economic burden of the pension scheme. - Raising the rate of benefits affects its economic burden, and raising the age of eligibility may decrease the burden substantially. - The level of fertility is an element in determining the long-run burden. A sustained low fertility rate increases the proportion of the aged in total population and increases the burden of the pension plan. High fertility has inverse effects.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.1
• /
• pp.153-180
• /
• 2020

This study is meaningful in finding out what legal and policy issues need to be improved in order to foster the aircraft industry, which is relatively underdeveloped compared to the fact that some heavy industries, such as the automobile industry and shipbuilding industry, have achieved a high level of production and technology globally. Korea's aircraft industry has been growing at a slower pace than other industries, largely due to the country's economic growth and the lack of a market structure to properly use variables such as the level of development in related industries, aircraft technology and demand for aircraft manufacturing. While most industries are privately led by the market structure of the competition system, heavy industries such as the aircraft industry generally grow under the market structure of the incomplete competition system, because only by securing huge initial investment costs, high technology, and sufficient demand, they can maintain minimum economic feasibility. The Korean aircraft industry was focused on developing and mass-producing military aircraft focusing on military demand, but it sought to turn the tide by signing the BASA (Bileral Aviation Safety Agreement) with the U.S. A preliminary feasibility study was conducted in 2010 to develop next-generation medium-sized aircraft, but was cancelled due to differences in position with Canada's Bombardier, which is subject to the concourse, and Korea Aerospace Industries (KAI) is pushing for the production of Bombardier's Q400 license on its own. Compared to the mid-to-large sized civil aircraft that are facing difficulties in development, KAI and KARI are successfully developing technologies to unmanned aerial vehicles and civil helicopters. In addition, the unmanned aerial vehicle sector is not yet suitable for manufacturers that have an exclusive global influence, so we believe that it is necessary to pursue government-led research and development projects with a focus on the areas of commercial helicopters and unmanned aerial vehicles in order to foster the aircraft industry in the future. In addition, since military aircraft such as KT-1 and T-50 are currently being exported smoothly, and it cannot be overlooked that the biggest demand for aircraft manufacturing in the Korea is the military, it is necessary to push forward national R&D projects and defense R&D program simultaneously to enable both civilian-military development. However, there are many differences between the two projects in the way they are implemented, the department in charge and the royalty system. Through this study, we learned about the technology ownership and implementation rights of national R&D projects and defense R&D programs, as well as the royalty system. In addition, problems with the system were identified and improvement measures were derived.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.