• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.148-149
• /
• 2012

As one of zero-expansion coefficient materials $Al_2TiO_5$ ceramics was prepared and the thermal shock-resistance was investigated by using DV-X analysis. In this report the mechanism of thermal shock-resistance and low mechanical strength.

• 한국농공학회논문집
• /
• 제53권5호
• /
• pp.25-33
• /
• 2011

In this paper, the effects of aggregate and curing temperature on strength development characteristics of UP (Unsaturated Polyester)-MMA (Methyl Methacrylate) based polymer mortar under sub-zero temperature are experimentally investigated to provide a criterion for repair and production of precast products. The result showed that the setting time of the binder was 4 minutes at $20^{\circ}C$ whereas 35 minutes at $-20^{\circ}C$. The result also revealed that the compressive, flexural, and splitting tensile strengths of UP-MMA based polymer mortar significantly decreased as the aggregate and curing temperatures decreased. However, sufficient strengths which can be implemented in actual practices -36.6 MPa of compressive strength, 6.11 MPa of flexural strength, and 5.81 MPa of splitting tensile strength - were obtained even though both aggregate and curing temperatures were $-20^{\circ}C$. Strength development of polymer mortar is largely affected by curing temperature rather than aggregate temperature. It was found that the effects of aggregate temperature on strength development become smaller as the curing temperature becomes lower. Also, toughness, a ratio of compressive strength to flexural strength, increased from 3.5 to 5.9 as both aggregate and curing temperatures decreased from $20^{\circ}C$ to $-20^{\circ}C$.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.360-364
• /
• 2003

Effects of sintering time upon the structures and microwave dielectric characteristics of co-substituted $Ba_{6-3x}$/S $m_{8+}$2x/ $Ti_{18}$ $O_{54}$ ceramics (x=2/3) were investigated. Prolonged sintering had significant effects upon the qf value and temperature coefficient, and a high Qf value (10,600 GHz) was obtained in the present ceramics combined with high-$\varepsilon$ (80) and near-zero temperature coefficient.t..

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.723-732
• /
• 2022

Cracking ammonia inside solid oxide fuel cell (SOFC) stack is a compact and simple way. To prevent sharp temperature fluctuation and increase cell efficiency, the decomposition reaction should be spread on whole cell area. This leading to a question that, how does anode thickness affect the conversion rate of ammonia and the cell voltage? Since the 0D model of SOFC is useful for system level simulation, how accurate is it to use equilibrium solver for internal ammonia cracking reaction? The 1D model of ammonia fed SOFC was used to simulate the diffusion and reaction of ammonia inside the anode electrode, then the partial pressure of hydrogen and steam at triple phase boundary was used for cell voltage calculation. The result shows that, the ammonia conversion rate increases and reaches saturated value as anode thickness increase, and the saturated thickness is bigger for lower operating temperature. The similar cell voltage between 1D and 0D models can be reached with NH₃ conversion rate above 90%. The 0D model and 1D model of SOFC showed similar conversion rate at temperature over 750℃.

• 한국재료학회지
• /
• 제31권1호
• /
• pp.29-37
• /
• 2021

Martensitic stainless steel is commonly used in the medical implant instrument. The alloy has drawbacks in terms of strength and wear properties when applied to instruments with sharp parts. 440C STS alloy, with improved durability, is an alternative to replace 420 J2 STS. In the present study, the carbide precipitation, and mechanical and corrosion properties of STS 440C alloy are studied as a function of different heat treatments. The STS 440C alloy is first austenitized at different temperatures; this is immediately followed by oil quenching and sub-zero treatment. After sub-zero treatment, the alloy is tempered at low temperatures. The microstructures of the heat treated STS 440C alloy consist of martensite and retained austenite and carbides. Using EDX and SADP with a TEM, the precipitated carbides are identified as a Cr23C6 carbide with a size of 1 to 2 ㎛. The hardness of STS 440C alloy is improved by austenitization at 1,100 ℃ with sub-zero treatment and tempering at 200 ℃. The values of Ecorr and Icorr for STS 440C increase with austenitization temperature. Results can be explained by the dissolution of Cr-carbide and the increase in the retained austenite. Sub-zero treatment followed by tempering shows a little difference in the properties of potentiodynamic polarizations.

• 인간식물환경학회지
• /
• 제24권5호
• /
• pp.519-527
• /
• 2021

Background and objective: This study was conducted to establish a Plant Hardiness Zone (PHZ) map, investigate the effect of global warming on changes in PHZ, and elucidate the difference in the distribution of evergreen trees between the central and southern region within hardiness Zone 7b in Korea. Methods: Mean annual extreme minimum temperature (EMT) and related temperature fluctuation data for 40 years (1981 to 2020) in each of the meteorological observation points were extracted from the Open MET Data Portal of the Korea Meteorological Administration. Using EMT data from 60 meteorological observation points, PHZs were classified according to temperature range in the USDA Plant Hardiness Zone Map. Changes in PHZs for each decade related to the effects of global warming were analyzed. Temperature fluctuation before and after the day of EMT were analyzed for 4 areas of Seoul, Suwon, Suncheon, and Jinju falling under Zone 7b. For statistical analysis, descriptive statistics and ANOVA were performed using the IBM SPSS 22 Statistics software package. Results: Plant hardiness zones in Korea ranged from 6a to 9b. Over four decades, changes to warmer PHZ occurred in 10 areas, especially in colder ones. Based on the analysis of daily temperature fluctuation, the duration of sub-zero temperatures was at least 2 days in Seoul and Suwon, while daily maximum temperatures were above zero in Suncheon and Jinju before and after EMT day. Conclusion: It was found that the duration of sub-zero temperatures in a given area is an important factor affecting the distribution of evergreen trees in PHZ 7b.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.873-882
• /
• 2021

In this study, a study was conducted to develop a system for predicting/responding to black ice occurring on roads in winter. Tests conditions were studied by making models of cement concrete pavement and asphalt concrete pavement. In order to freeze water on the manufactured model package, an tests was conducted at a temperature below zero using a freezer, and the freezing process was photographed using a thermal imaging camera. Black ice is generated when water is present on the road surface and the temperature is below freezing or the road surface temperature is below the dew point temperature. Under sub-zero conditions, the pavement, water, and ice were classified with a thermal imaging camera. As a result of the tests, it was possible to distinguish with a thermal imaging camera at a temperature below freezing in the same freezer due to the difference in the emissivity of the packaging, water, and ice. In the process of changing from water to ice during the tests, it was analyzed that ice and water were clearly distinguished by the thermal imaging camera due to the difference in emissivity and reflectance, so black ice could be predicted using the thermal imaging camera.

• Journal of Magnetics
• /
• 제12권3호
• /
• pp.103-107
• /
• 2007

Magnetic field induced structural transition has been systematically investigated for $La_{1-x}Ba_xMnO_3$ with the fine control of carrier doping $(0.15{\leq}x{\leq}0.20)$. Application of a magnetic field results in the suppression of the rhombohedral-orthorhombic transition temperature $(T_s)$ and the increase of insulator-metal transition temperature $(T_{MI})$. Near x = 0.17, where $T_S$ is similar to $T_{MI}$ at zero magnetic field, we found that the $T_S$ smoothly decreased with magnetic field even though it intersected the $T_{MI}$ near 3 T. Also, the magnetostructural phase diagram obtained from the temperature sweep and from the magnetic field sweep is not significantly modified. By comparing the magnetostructural transition in $La_{1-x}Sr_xMnO_3$, we have suggested that the large disorder originated from ionic size differences between La and Ba may weaken the sensitivity of the kinetic energy of $e_g$ electrons on the degree of lattice distortion in $La_{1-x}Ba_xMnO_3$.

• 한국자기학회지
• /
• 제17권1호
• /
• pp.14-17
• /
• 2007

고상 반응법을 써서 전이금속(Cr, Ti)을 치환한 란탄칼슘망간산화물, $La_{0.5}Ca_{0.5}(Mn_{0.98}TM_{0.02})O_3$의 자성특성을 연구하였다. 자성 특성은 VSM을 써서 측정하였고, 50 Oe에서 zero field cooling과 field cooling을 하면서, 자화-온도측정을 Cr과 Ti 치환한 경우에 측정하였다. $La_{0.5}Ca_{0.5}(Mn_{0.98}Cr_{0.02})O_3$는 클러스터 또는 스핀유리와 유사한 거동을 보였으며, $La_{0.5}Ca_{0.5}(Mn_{0.98}Ti_{0.02})O_3$에서는 관찰되지 않았다. 큐리온도는 전이금속이 치환된 시편의 경우 란탄칼슘망간산화물 $La_{0.5}Ca_{0.5}MnO_3$의 큐리온도 245.5K에서 감소한, 235.5 K [$La_{0.5}Ca_{0.5}(Mn_{0.98}Cr_{0.02})O_3$], 232.7 K [$La_{0.5}Ca_{0.5}(Mn_{0.98}Ti_{0.02})O_3$]로 모두 감소하였다. 자벽 고정(domain wall pinning)을 알아보기 위해 온도에 따른 보자력 측정을 하였고, 이 결과를 defect와 자벽 간의 상호작용의 관점으로 해석하였다.

• 한국재료학회지
• /
• 제2권4호
• /
• pp.293-297
• /
• 1992

Mossbauer 분광법으로 비정질 Fe/sub 32/Ni/sub 36/Cr/sub 14/P/sub 12/B/sub 6/의 자기적 성질을 연구하였다. 88K의 스펙트럼 분석에 의하면 초미세 자기장의 값은 140.5kOe이며 사중극자 분열은 거의 0의 값을 같는데 이는 초미세 자기장이 전기장 기울기 주축에 대해서 무질서하게 나열함을 의미한다. 시료의 Tc는 280K이고 상자성 온도 영역에서는 사중극자 분열값은 온도에 무관하게 거의 일정한 값을 나타냈다. 되튐없는 확률로부터 시료의 Debye특성 온도 288K를 얻었다.