• Structural Engineering and Mechanics
• /
• 제86권4호
• /
• pp.503-518
• /
• 2023

In tall constructions, the outriggers are regarded as a structural part capable of effectively resisting lateral loads. This study analyses the efficacy of hybrid outrigger system in high rise RCC building for various structural parameters identified. For variations in α, which is defined as the ratio of the relative flexural stiffness of the core to the axial rigidity of the column, static and dynamic analyses of hybrid outrigger system having a virtual and a conventional outrigger at two distinct levels were conducted in the present study. An investigation on the optimal outrigger position was performed by taking the results from absolute maximum inter storey drift ratio (ISD_max), roof acceleration (acc_roof), roof displacement (disp_roof), and base bending moment under both wind and seismic loads on analytical models having 40, 60 and 80 storeys. An ideal performance index parameter was introduced and was utilized to obtain the optimal position of the hybrid outrigger system considering the combined response of ISD_max, acc_roof, disp_roof and, criteria required for the structure under wind and seismic loads. According to the behavioural study, increasing the column area and outrigger arm length will maximise the performance of the hybrid outrigger system. The analysis results are summarized in a flowchart which provides the optimal positions obtained for each dependent parameter and based on ideal performance index which can be used to make initial suggestions for installing a hybrid outrigger system.

• 한국환경과학회지
• /
• 제29권11호
• /
• pp.1025-1032
• /
• 2020

This work was performed to develop a dip injection wet scrubber (DIWS) system with chlorine dioxide as the oxidant. The exhaust pollutants from a lime kiln of paper-mill were introduced to the system. When NaClO₃ was used to oxidize NO into NO₂, the oxidation was unsatisfactory and the combination of HNO₃ or H₂SO₄ was required for 100% oxidation. ClO₂ is recommended to oxidize NO and SO₂ effectively. With the combination of 1^st stage of DIWS and ClO₂, 57.1% of NOx and 98% of SO₂ were effectively removed. In the case of 2^nd stage of DIWS and ClO₂, 93.5% of NOx and 99% of SO₂ were removed. The ClO₂+DIWS process was superior to the ClO₂+Scrubber process in terms of investment, running cost and NOx removal efficiency.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.151-152
• /
• 2012

Recently, there are growing interests in building LCCO₂ Assessment to reduce carbon emissions. However, existing methods of assessment system include inefficiency in the process of CO₂ calculation requiring considerable data input. Therefore, the purpose of this study is to develop an efficient building assessment system appropriate to material production in construction stage. To that end, quantity input technology was limited to data mapping. Also quantity calculation based on work breakdown structure and item codes consisted of hierarchical structure that is based on facet classification were analyzed. As a result, connectivity links of quantity calculation and CO₂ functional units through item codes for data mapping, and assessment system including calculation and database parts were developed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.111-112
• /
• 2013

Architecture has a large influence in the environment and human health. Therefore eco-friendly concept and sustainable development are important in Architectural field. This study aims to analyze impact of green building rating system on an apartment housing CO₂ emission using multiple regression analysis. But in this result, green building rating system has no effect on CO₂ emission. So, future study is required to analyze factors of green building rating system on the CO₂ emission.

• 한국재료학회지
• /
• 제31권5호
• /
• pp.296-300
• /
• 2021

Al-Cr-Si ternary quench ribbons are fabricated using a single roll method and investigated for their structural and thermal properties. In particular, the sinterability is examined by pulse current sintering to obtain the following results. The Al₇₄Cr₂₀Si₆ composition becomes a quasicrystalline single phase; by reducing the amount of Cr, it becomes a two-phase mixed structure of Al phase and quasicrystalline phase. As a result of sintering of Al₇₄Cr₂₀Si₆, Al₇₇Cr₁₃Si₁₀ and Al₉₀Cr₆Si₄ compositions, the sintering density is increased with the large amount of Al phase; the sintering density is the highest in Al₉₀Cr₆Si₄ composition. In addition, as a result of investigating the effects of sintering temperature and pressurization on the sintered density of Al₉₀Cr₆Si₄, a sintered compact of 99% or more at 513 K and 500 MPa is produced. In particular, since the Al-Cr-Si ternary crystal is more thermally stable than the Al-Cr binary quaternary crystal, it is possible to increase the sintering temperature by about 100 K. Therefore, using an alloy of Al₉₀Cr₆Si₄ composition, a sintered compact having a sintered density of 99 % or more at 613 K and 250 MPa can be manufactured. It is possible to increase the sintering temperature by using the alloy system as a ternary system. As a result, it is possible to produce a sintered body with higher density than that possible using the binary system, and at half the pressure compared with the conventional Al-Cr binary system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.990-995
• /
• 2009

Experimental basic study was performed to understand the characteristics of sub-cooled refrigerant using a cold heat storage system. This system was made up general vapor-compression refrigeration cycle added sub-cooler and ice storage tank. The purpose of this study are to application use of cold-heat storage systems multiplicity of fields and to understand of sub-cooling system. At the condition using ice storage system, the ice making process was operated during night time by electric power. And then, the refrigerant was sub-cooled using stored cold-heat after being discharged from the air cooling condenser during the day time. Comparing the result at general operation with the operation using sub-cooling system. This study showed the effects of the sub-cooled degree. The cooling performance was increased owing to the sub-cooling of refrigerant during day time, and the compressor consume power was a little decreased. Thus the COP was also increased owing to the sub-cooling of refrigerant.

• 상하수도학회지
• /
• 제11권4호
• /
• pp.133-141
• /
• 1997

In order to treat the landfill leachate, $UV/TiO_2/H_2O_2$ system connected with biological treatment was investigated, and proper pretreatment methods were examined to reduce the load on the system considering economical and technical efficiency. It was more profitable to put $H_2O_2$ into the system in the early stage for the sample which was treated with $H_2SO_4$ to decrease alkalinity and with $FeCl_3-6H_2O$ flocculation. Because the required reaction time run up by increasing $H_2O_2$ input amount, though the COD was reduced slightly, the optimal $H_2O_2$ input amount should be determined for the desired COD and the economical efficiency. The appropriate way to get the lowest COD in the shortest time was the method to treat the sample which was controlled to pH 3.5 after adjusting to pH 12 and put 500 ppm $H_2O_2$ into the system. In that case, to increase $H_2O_2$ input amount was not profitable for the system efficiency. The sufficient photocatalytic excited time was required to reduce the photocatalytic decomposition time for the sample which was gone through the alkali state.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.488-493
• /
• 2023

The effect of sputtering power on the amorphous Ga₂O₃ thin film deposited using the radio frequency sputtering system was evaluated. Amorphous Ga₂O₃ is cheaper and more efficiently fabricated than crystalline Ga₂O₃, and is studied in various fields such as RRAM, photodetector, and flexible devices. In this study, amorphous Ga₂O₃ was deposited by radio frequency sputtering system and represented a transmittance of over 80% in the visible light region and a homogeneous and dense surface. The optical band gap energy decreased as the sputtering power increased owing to the quantum size effect. Thus, the specific band gap of amorphous Ga₂O₃ can be obtained by adjusting the sputtering power, it indicates amorphous Ga₂O₃ can be used in various fields.

• Journal of Applied and Pure Mathematics
• /
• 제6권1_2호
• /
• pp.97-103
• /
• 2024

This study is about digits of numbers in system logic B₃. Any real number is written as digits in the binary system, in the ternary system. The numbers in base two and base three are also written in the B₃ system ternary logic. These two writing methods are transferred into the third method. The real numbers 0,1 and 0, 1, 2 are written as digits. The same real numbers are written as digits of elements of the set -1, 0, 1 in base B₃. The periods here are investigated. The relationship between these digits is analysed.

• 산업기술연구
• /
• 제1권
• /
• pp.47-51
• /
• 1981

A Kinetic model of desorption of hydrogen in $Dy_2Co_7-H$ system has been suggested and rate equation of each step of the model has been compared with experimental results. The reat controlling step was hydrogen recombination in metal surface. The activation energy of over-all reaction was about 23kcal/mole.